FURNITUREBOX BARBADOS DINING SET User manual

BARBADOS
DINING SET
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/barbadosdining
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
1 HOUR
BUILD TABLE
MAXIMUM
CAPACITY 70Kg
TWO
PERSON
GLASS

Follow us on Instagram
@furniturebox_uk
STEP 1
Use a clear, at, soft surface to
avoid bumps or scratches. Lay
all your components and xings
out. Note: we recommend you
don’t fully tighten any of the
bolts until everything is fully
assembled.
First, assemble your chairs.
Attach 1x right chair arm [A] and
1x left chair arm [B] to 1x chair
seat [C] and chair back [D] using
12x washers [G] + bolts [F].
Once assembled, fully tighten
bolts with Allen key [M], and add
cushion [E].
Repeat for all 4 chairs.

www.furniturebox.co.uk
STEP 3
Carefully, and with help,
turn your table over to sit
on its feet. Carefully lower
glass tabletop [J] onto table
frame.
STEP 2
Next, assemble the table.
Place tabletop [I] face down
on soft at surface. Attach
4x table legs [H]. Each leg
requires 4x table washer [L]
+ 4x table bolts [K].
Once assembled, fully
tighten bolts with Allen key
[M].

Follow us on Instagram
@furniturebox_uk
STEP 4
Check stability of all components. Your table and chairs are now
ready to use!