FURNITUREBOX VOGUE User manual

VOGUE
DINING TABLE
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/vogue-round
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD
GLASS

Follow us on Instagram
@furniturebox_uk
STEP 1
Insert (C) into each of the legs [2]
using screw (B).
Tighten using allen key (F).
STEP 2
Start by connecting two
legs [2] using screw (A).
ATTENTION: With help,
bring the two legs up and
put the third underneath
to form a tripod. Secure
the third leg with the
remaining screws (A).
Tighten using allen key (E)
Ensure the aluminium discs
are all loated at the top.

www.furniturebox.co.uk
FULL ASSEMBLY INSTRUCTIONS
STEP 3
ATTENTION: With help place the table top
[1] upside down onto a clear at surface.
Place the stand onto the glass with the
attachments with the glass xings.
Once in place secure using screws (D).
Tighten using allen key (G)
STEP 4
ATTENTION: With help,
turn the table around to
complete assembly.

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.