FURNITUREBOX MIAMI User manual

MIAMI
CONSOLE TABLE
ASSEMBLY GUIDE
www.furniturebox.co.uk
Scan QR code for more tips,
advice and assembly video or visit
furniturebox.co.uk/club/miami-console
SCAN ME

• Check you have all the components and
tools listed.
• Remove all ttings from the plastic bags
and separate them into their groups.
• We do not recommend the use of power
drills/drivers for inserting screws, as this
could damage the unit. Only use hand
screwdrivers and Allen keys.
• Keep children and animals away from the
work area, small parts could cause choking
if swallowed.
• Make sure you have enough space to
layout the parts before starting.
• Assemble the item as close to its nal
position (in the same room) as possible.
• Do not overtighten the nuts to avoid
causing damage to the threads.
Important - Please read these instructions fully before starting assembly
SAFETY AND
CARE ADVICE
!
NO POWER TOOLS
Follow us on Instagram
@furniturebox_uk
• Only clean using a damp
cloth and mild detergent,
do no use bleach or
abrasive cleaners.
• From time to time check
that there are no loose
screws on this unit
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre
SAFETY AND CARE ADVICE

www.furniturebox.co.uk
PLEASE CHECK CAREFULLY AND MAKE SURE YOU HAVE ALL
FITTINGS AND TOOLS LISTED BELOW BEFORE YOU START.
NOTE: The quantities above are the correct amount to complete the assembly. In
some cases more ttings may be supplied than are required.
IMPORTANT INFORMATION
TWO
PERSON
MAXIMUM
CAPACITY 100Kg
45 MINUTE
BUILD

Follow us on Instagram
@furniturebox_uk
STEP 1
Use a clear, at, soft surface to avoid bumps or
scratches.
Lay table top [1] on oor, with metal discs facing up.
Attach legs [2] to metal discs on table top, using 1 x
washer [B] followed by 1 x screw [A] . Tighten with
Allen key [C]

www.furniturebox.co.uk
STEP 3
To ensure stability, you can
attach your console table
to the wall using the anti-
rewind accessories. This
step is optional.
Measure and carefully drill
holes into your wall that will
align with the holes in the
bracket [E]. Push 2 x wall
plugs / wall plugs [D] into
the wall. Align bracket [E]
and screw into place using
2 x screws [F]. Use cable tie
[G] to anchor your console
table to the wall.
FULL ASSEMBLY INSTRUCTIONS
STEP 2
ATTENTION: Carefully, and
with help, ip your table
correct side up, so it sits on
its legs. Check stability. Your
console table is now ready
to use.

www.furniturebox.co.uk

The cushions (foam inserts and
covers) are not covered by the guarantee.