GPS RECEIVER CHARACTERISTICS
1. Receiver Type Twelve discrete channels, C/A code,
all-in-view, Integral WAAS receiver processor
2. Receive Frequency L1 (1575.42 MHz)
3. Accuracy GPS: 10 m (95%)
DGPS: 5 m (95%)
WAAS: 3 m (95%)
4. Time to First Fix 12 seconds typical (Warm start)
5. Tracking Velocity 999 kts
6. Geodetic System WGS-84, NAD-27, and others
7. DGPS Capability
GP-1850WD/1850WDF: DGPS beacon receiver built in
GP-1850W/1850WF: External DGPS beacon receiver transmitting
data in RTCM SC104 v.2.1 format through
RS-232 interface or optional internal DGPS
beacon receiver
PLOTTER CHARACTERISTICS
1. Display 7 inch color LCD, 320 x 234 pixels
2. Map Scale 0.125 to 2,048 nm
3. Latitude Limits Between 85°N and 85°S
4. Plot Interval 1 s to 99 min 59 s or 0.01 to 9.99 nm
5. Display Modes Course plot, Nav Data, Steering Display,
Highway
6. Presentation Modes TM/RM North-up, Course-up
7. Memory Capacity Up to 5,000 points for ship's track points and
marks.
800 waypoints and 200 planned routes
(Max. 35 waypoints/route)
8. Voyage Planning Waypoint navigation or route navigation
9. Alarms Arrival/anchor watch, XTE, proximity alert,
ship speed, depth*, water temperature*, fish*
*GP-1850WF/1850WDF —Temperature sensor required for water temp alarm.
10. Interface (NMEA 0183 ver. 1.5/2.0)
Outputs:
AAM, APB, BOD, BWC, GGA, GLL, RMA, RMB, RMC, VTG, WPL,
XTE, ZDA, DBT*, DPT*, MTW*, MSK
Inputs:
DBT*, DPT*, MTW*, TLL, YMWPL (YEOMAN wpt data)
*GP-1850WF/1850WDF
11. Electronic Chart FURUNO MiniChart and
NAVIONICS®Nav-Chartor
C-MAPNT Chart
ECHO SOUNDER
1. Display Modes Normal (single- or dual-frequency), Bottom-lock,
Bottom Zoom, Marker Zoom, A-scope
2. Frequency 50 and 200 kHz
3. Output Power 600 W/1 kW (specify when ordering)
4. Basic Ranges 8 basic ranges customized to max 1200 m
(4000 ft, 650 fa)
5. Range Phasing Up to 2400 m (8000 ft, 1300 fa)
ENVIRONMENTAL CONDITIONS (IEC 60945 testing)
1. Temperature
Display Unit: -15°C to +55°C
Antenna Unit: -25°C to +70°C
2. Waterproofing
Display Unit: IPX5 (IEC 60529), CFR46 (USCG)
Antenna Unit: IPX6 (IEC 60529), CFR46 (USCG)
POWER SUPPLY
12 - 24 VDC, GP-1850W: 17 W, GP-1850WD: 19 W, GP-1850WF: 31 W,
GP-1850WDF: 33 W
EQUIPMENT LIST
Standard
1. Display Unit 1 unit
2. Antenna Unit with10 m cable 1 unit
3. NMEA Cable 5 m 1 pc
4. Installation Materials and Standard Spare PParts 1 set
Option
1. FURUNO MiniChart Card
2. Remote Controller
3. NMEA Cable 10 m
4. Antenna Mounting Base
13-QA330 (Pipe mount), 13-QA310 (Offset bracket), 13-RC5160 (Handrail mount)
5. Rectifier PR-62 for 115/230 VAC mains
6. Temperature Sensor T-02MTB/T-02MSB/T-03MSB (GP-1850WF/GP-
1850WDF)
7. Speed/Temperature Sensor ST-02MSB/ST-02PSB (GP-1850WF/GP-
1850WDF)
8. Internal DGPS Beacon Receiver Kit for GP-1850W/GP-1850WF
Transducers (Specify when ordering GP-1850WF/1850WDF)
600 W
520-5PSD (Plastic thru-hull), 520-5MSD (Bronze thru-hull),
520-5PWD (Plastic transom), 525ST-MSD (Bronze thru-hull w/speed/temp sensor)
525ST-PWD (Plastic transom w/speed/temp sensor)
1 kW
50/200-1T (Optional matching box required)
SPECIFICATIONS OF GP-1850W/1850WD/1850WF/1850WDF
05033SS Printed in Japan
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE