Furuno TZTL12F Manual

www.furuno.com
Home screen operations
Home screen operations
Operational Overview
POWER switch
POWER switch
- Power on/off.
- Adjusts display brilliance.
- Changes hue.
Tap
Displays the home screen.
Home icon
Home icon
Display icons
(max. 10)
Home screenHome screenHome screen
Home screenHome screen
Long tap a display icon to edit, delete, resize, or
change its location.
Display icon long tapped
Edit Delete
Size
(large or
small)
Tap
How to select a display
How to select a display
- From the home screen (see above)
- From the quick page
The quick page has the display
icons selected to large size on
the home screen.
Quick pageQuick pageQuick page
Quick pageQuick page
“eGuide” provides
an abbreviated
operator’s guide.
Tap
MULTI FUNCTION DISPLAY
TZTL12F/TZTL15F
Operator’s Guide
Model
The purpose of this guide is to provide the basic operation for this equipment. For detailed information,
see the operator’s manual in the supplied CD-ROM. You can get the latest version of the manual by
accessing the quick response code at the back of this guide.
iPhone, iPod and iPad are trademarks of Apple Inc. Android is a trademark of Google Inc. All brand and
product names are trademarks, registered trademarks or service marks of their respctive holders.
Tap
How to edit a display icon

2
Touchscreen operations
Touchscreen operationsTouchscreen operations
Tap
- Select an item on a menu.
- Select an object to show the
corresponding pop-up menu.
- Move the chart.
- Scroll the menu.
Zoom in Zoom out
Do the function assigned to
[Function Gesture] in the
[Settings] - [General] menu.
Drag
Two finger pinch Two finger tap
Menu operation
Menu operation
- Zoom in, zoom out the
plotter and weather displays.
- Change the range on the
radar display.
Slider barSlider barSlider bar
Slider barSlider bar
Drag
Tap operation also
available.
Pop-up menu
Tap any part of the
screen or an object.
Tap the required function.
(”>” indicates additional options.)
Layer menu
Tap the required function.
Layer menuLayer menuLayer menu
Layer menuLayer menu
Slide-out menu
Tap the required function.
Slide
menu
Slide
menu
Slide
menu
Slide
menu
Slide
menu
Swipe leftward from the
right edge. Icon color and function state
Yellow: ON, White: OFF
Tap the [Home] icon.
Tap [Settings].
Tap the required menu. Tap the required option.
Settings menu
Two finger drag
Change the viewpoint
position on the 3D
display.
Zoom
in
Zoom
in
Zoom
in
Zoom
in
Zoom
in
Zoom
out
Zoom
out
Zoom
out
Zoom
out
Zoom
out
Pop-up
menu
Pop-up
menu
Pop-up
menu
Pop-up
menu
Pop-up
menu
Swipe upward from
the bottom edge.

3
Plotter
Display range
Data area Heading line
Inactive route
(expanded)
Point
Track
COG
COG
Return own
ship to screen
center
Re
t
Tap
Orientation Mode
Switch between
NU and HU.
Switch between 2D
and 3D. (Drag upward
with two fingers also.)
2D: 3D
3D: 3D
Swipe from the left edge of the screen rightward to show the data area at the left edge of the screen. Tap
“<” to hide the data area.
How to add a data box
How to add a data box
How to remove or change the contents of a data box
How to remove or change the contents of a data box
Tap the data to add.
Tap an unoccupied space.
Ex. “Cursor” data added to the data
box
Data Area (Data Box)
Data Area (Data Box)
Tap the data to remove or change.
Tap the data to remove or change.Tap the data to remove or change.
Data box settings
Remove: Tap [Remove].
Change: Tap the data to use.
Use flipswitch to set data format.
(ON: Analog, OFF: Digital)
Boat icon
Boat icon
C
urso
r
Inactive route
(sleeping)
(Departure or
arrival point,
selectable on
[Layers] menu.)
DATA ROUTE RADAR
DATA ROUTE RADAR
DATA ROUTE RADAR
DATA ROUTE RADAR
DATA ROUTE RADAR

4
Points
Points can be entered on the plotter and radar displays to mark important locations such as a
good fishing spot. Point attributes (position, symbol type, color, etc.) are recorded to the points
list.
Tap where to enter a point.
The point is entered
on the screen.
Tap a point or the location
to set as destination.
On-screen point Selected location
On-screen point
On-screen point
Points list
Points list
How to enter a point
Yellow line:
Shortest course from own
ship to the destination.
Red dashed line (thick):
Indicates course to go to the
destination.
Tap the point to set as the destination.
How to set a point as destination
Tap [List] on the
home screen.
The point is put at the center
of the plotter display.
Sort the list by name, icon, color, range.
Destination point

5
Routes
Routes
A
route is comprised of a series of waypoints leading to a destination. Routes are saved to the
routes list.
On-screen route
On-screen route
Routes list
Routes list
Tap the first point for
the route.
At the last point
Tap the next point for the route.
Repeat to enter all points for the route.
How to create a new route
How to follow a route
Tap a leg of the route.
0
0
Tlfth t
1
2
3
4
1
2
3
4
1st point
(route start point)
1st point
(route start point)
Last point
Last point
Home screen
Sort list by name, color, or total length.
Tap the route.
Enter a name for the route, then tap [ ].
(Top right corner)

6
Radar
How to switch between standby and TX
How to switch between standby and TX
Select
method
Manual
adjustment
Tap to switch between
automatic and manual.
method
Manual
Drag the
slider/tap the
slider bar to
adjust.
How to adjust the gain / sea clutter / rain clutter
How to adjust the gain / sea clutter / rain clutter
R
ADAR
D
ATA
2
DATA
1
TX
X
Tap
: Standby
: TX
TX
TX
Tap
“A” means automatic adjustment
“M” means manual adjustment
Tap
Data
area
Own ship position
Own ship position
Heading line
Heading line
Guard zone
Guard zone
Fixed range rings Range
North mark
North mark
Slider
bar
Return own
ship icon to
screen
center.
0
10
20
30
40
50
60
70
80
90
100
110
120
200
230
240
250 260 270
280
290
300
310
320
330
340
350
210
180
170
160
140
220
190
150
130
340
Gain
Sea
Rain
Tap
(At bottom of data area)
RADAR
DATA ROUTE
RADAR
DATA ROUTE
AR
R
R
R
R
Tap
(Top right corner)

7
Tap
Target
Target
Tap a target to show its range
and bearing from own ship.
How to measure the range, bearing from own ship to a target
How to measure the range, bearing from own ship to a target
How to set a guard zone
How to set a guard zone
A guard zone alerts you (with aural and visual alarms) when a radar target enters the area you
specify.
The guard zone appears in dashed
lines.
A circle appears at each corner
of the guard zone.
The dashed lines change to
solid lines, indicating the
guard zone is active.
Drag the circles to set guard zone.
0
10
20
30
40
50
60
70
80
90
100
110
120
200
230
240
250 260 270
280
290
300
310
320
330
340
350
210
180
170
160
140
220
190
150
130
340
Open the
[Layers] menu.
1
Tap dashed line on guard zone.
Tap
Guard zone
Guard zone
Tap the guard zone again.
Tap
2:01 PM
ON
ON
ON
RADARDATA ROUTE
(Top right corner)

8
ARPA Operation
ARPA Operation
How to activate, deactive ARPA
How to manually acquire a target
Tap the target to acquire.
Target
Target
Tap
ARPA symbols
At acquisition Lost target
How to display target data
Tap an ARPA target to show its data.
ARPA
target
ARPA
target
Tap
ARPA is an anti-collision aid that tracks the movement of other ships to help prevent collision.
ARPA not only tracks other ships but also provides their navigation data. Targets can be acquired
manually, automatically, or both automatically and manually.
2
ID
BRG
RNG
CPA
TCPA
1
Within 30 seconds
after acquisition
1
ARPA activated
ARPA deactivated
Acquire
Open the
[Layers] menu.
㔎㔐෻኿
0
10
20
30
40
50
60
70
80
90
100
110
120
200
230
240
250 260 270
280
290
300
310
320
330
340
350
210
180
170
160
140
220
190
150
130
340
2:01 PM
ARP
ON
A
A
A
AR
A
OFF
RADARDATA ROUTE

9
OR
CPA/TCPA alarm
The CPA/TCPA alarm releases aural and visual alarms when both the CPA and TCPA of a tracked
target are equal to or lower than the CPA/TCPA alarm setting.
How to set the CPA/TCPA alarm
How to set the CPA/TCPA alarm
CPA: Closest point of approach
TCPA: Time to closest point of approach
How to acknowledge the CPA/TCPA alarm
How to acknowledge the CPA/TCPA alarm
CPA/TCPA Alarm
Tap the alarm message (top of screen) to acknowledge the alarm and stop the aural alarm.
Tap
Home screen
H
H
Set the alarm value, then tap [ ].
ON

10
AIS symbols ON
AIS symbols OFF
How to show or hide AIS target symbols
How to show or hide AIS target symbols
AIS target symbols
AIS target symbols
Class B AIS
Color: blue
SOG/COG
vector
Color: green
SOG/COG
vector
Flashing
Color: red
Color
- AIS target: blue
- “x” symbol: red
Color
- AIS target: green
- “x” symbol: red
Class A AIS
Normal target
Dangerous target
Lost target
Proximity AIS target alarm
Proximity AIS target alarm
The proximity AIS target alarm releases aural and visual alarms when the distance between own ship and an
AIS target is less than the alarm value.
How to show AIS target data
How to show AIS target data
Tap an AIS target to show its data.
AIS
target
AIS
target
Tap
AIS (Automatic Identification System)
Home screen
H
H
FURUNO
987654321
F
URUN
O
98
7
65
4
3
21
Set the alarm value, then tap [ ].
20
30
60
Open the
[Layers] menu.
AISs
ON
OFF
ON
RADARDATA ROUTE

11
Fish Finder
How to select a frequency
How to select a frequency
Low frequency: For “normal” use.
High frequency: For detailed observation of schools of fish.
Dual frequency: Show both the low and high frequency pictures.
750-
m
556
Tap
(High Freq.)
(Low Freq.)
Single frequency
Dual frequencyDual
f
requenc
y
How to show past echoes (echo history)
How to show past echoes (echo history)
Swipe leftward or rightward
to show past echoes.
750-
m
556
Return to normal display.
Switch between TX
and standby.
ACCU-FISH
TX/STBY
A-Scope
ft HF 556
ft HF 556
ON
ON
ON
Bottom
echo
Depth
scale
Fish
mark*1
Frequency, depth
Slider
bar
A-scope
display
Temperature
scale*2
Temperature graph*2
*1 Requires appropriate transducer.
*2 Requires temperature sensor.
ft HF 11.0
ON
(Top right corner)

12
Manual mode
How to select the operating mode
The fish finder is available in automatic and manual operation. For automatic operation, gain, clutter and
TVG are automatically adjusted.
How to change the range
How to change the range
Pinch screen.
How to adjust the gain
How to reduce the clutter
operating moperating m
a
utomatic and manu
e
d
.
750-
Tap
Auto mode
Manual mode
OR
A
-Sco
pe
750-
Tap
Drag the slider to set the range.
(The slider bar can also be
tapped to set the range.)
Pop-up menu
How to adjust theHow to adjust the
Tap the fish finder screen
to show the pop-up menu.
(The slider bar can also be
tapped to set the gain.)
Home screen
H
H
Drag the slider to set the gain.
ft
HF
556
ft HF
556
OF F
ON
ON
ON
(Top right corner)

13
ACCU-FISHTM
ACCU-FISHTM
ACCU-FISH
TM
measures the size and depth of individual fish and shows that information on the
screen.
Set fish info to [Fish Size] or [Depth],
then tap “<”.
Select the fish mark type ([Solid] or [Striped]) to
show, or select [OFF] to show only size or depth.
Home screen
H
H
750-
Tap
Search for bottom
fish.
Find bottom contour
and hardness.
Short tail: Soft bottom
Long tail: Hard bottom
Zoom display
Zoom display
750-
Tap
m
156
m
156
S
elect the fish mark t
y
s
how, or select [OFF]
ACCU-FISH
ft
HF
156
ft
HF
156
ft
HF
556
ft
HF
556
ON
ON
ON
How to set ACCU-FISHTM

14
How to enable the instrument display
How to enable the instrument display
Add an instrument display icon to the home to screen to show the instrument display.
Tap
Tap
Drag
How to edit an instrument display
How to edit an instrument display
Long tap
Long tap the instrument
display.
A blue line surrounds each
indication.
Long tap location not circumscribed with
blue line to save changes .
Long tap the indication to
change or remove to get into the
edit mode.
Tap
How to remove or change an indication
What you can do in the edit modeWhat you can do in the edit modeWhat you can do in the edit mode
What you can do in the edit modeWhat you can do in the edit mode
Remove / change / add / rearrange
indications (drag and drop)
Long tap an area not circum-
scribed with a blue line to get
into the edit mode.
Tap
How to add an indication
Tap a size in desired category
([Graphic], [Numeric], Highway]).
Edit modeEdit modeEdit mode
Edit modeEdit mode
With connection of appropriate sensors, the instrument display shows various navigation data.
Instrument Display
How to switch instrument displays (ex. full display)
Swipe up or down
Full 2 displayFull 2 display
Full 1 displayFull 1 display
After setting, tap [ ].
(Incorporation in 3-way
screen is also possible.)
- Remove indication: Tap [Remove].
- Change size: Tap [Small]*, [Medium], or [Large].
- Change type: Tap [Change Type].
- Change indication: Select in [NAVIGATION DATA].
* Graphic, digital only
Added item appears at tapped
location.

15
You can connect to the internet with the wireless LAN signal to download weather information and to
connect to an iPhone, iPod, iPad, or Android device.
How to connect to an existing LAN
Wireless LAN Setting
Connect to the existing LAN to download weather data or update the software.
Home screen
H
H
Select [When Necessary], then tap “<”.
Select [Connect to existing LAN], then tap “<”.
XX
XX
X
XXX
XXXX
XXX
XXX
XXX
X
Tap network required.
Enter the name of the network, then tap [OK].
ON

16
How to create a local wireless network
Create a local wireless network to connect to an iPhone, iPod, iPad, or Android device.
Home screen
H
H
Check that [When Necessary] is
selected.
Check that [OFF] is selected. Select [Create Local Network], then tap “<”.
X
XXXXXXXX
X
XXXXXXXX
X X X X X X XX
Enter the name of the network, then tap [ ].
Enter the password, then tap [ ].
ON Connect to the NavNet TZ
touch 2 from the smart-
phone or tablet.
PUB. NO. OSE-44870-A
(1501, DAMI) TZTL12F/15F