Gaiam 05-62181 Installation instructions

Setup, Workout Tips, and Care & Safety Guide
Please read before setting up or using your Balance Ball® Stability Ring.
BALANCE BALL®
STABILITY RING
SETUP
1. Remove Balance Ball® Stability Ring from box and check for shipping damage.
2. Assemble your Balance Ball® Stability Ring (see back for assembly instructions).
Your Balance Ball® Stability Ring is now ready for use.
WORKOUT TIPS
1. Initially follow the exercises presented in the program without using the
Balance Ball® Stability Ring. This will help you become more familiar with the
workout and its benefits.
2. Ensure the Balance Ball® Stability Ring is secure against the floor before
applying pressure to the Balance Ball®.
CARE
1. Dry Balance Ball® Stability Ring with a towel after use.
2. Wipe the Balance Ball® Stability Ring with a damp cloth to clean. Air dry.
3. Avoid exposing the Balance Ball® Stability Ring to heat or excessive sunlight.
4. Store in a cool, dry place.
IMPORTANT SAFETY CAUTIONS!
1. This product is sold without any warranties or guarantees of any kind
and manufacturer and distributor disclaim any liability, loss or damage
caused by its use.
05-62181_GA_BBall_StabilityRing_CARE.indd 1 1/28/16 4:47 PM

Setup, Workout Tips, and Care & Safety Guide
Please read before setting up or using your Balance Ball® Stability Ring
SKU 05-62181CARE
Learn more at http://life.gaiam.com
©2016 Gaiam Americas, Inc. All rights reserved. GAIAM, Balance Ball® and the “Flower of Life” logo design are registered trademarks of Gaiam Americas, Inc.
Manufactured and distributed by Gaiam Americas, Inc., Louisville, CO 80027-2452.
MADE IN TAIWAN.
ASSEMBLY
BALANCE BALL®
STABILITY RING
STEP 1.
Snap the 3 pegs into the 3 holes
and lock the two pieces together.
STEP 2.
Ensure the pieces are locked
securely into place.
STEP 3.
Repeat Step 1. Ensure the four
pieces are locked securely into
place. Your Balance Ball® Stability
Ring is now ready for use.
05-62181_GA_BBall_StabilityRing_CARE.indd 2 1/28/16 4:47 PM