Galcon AC 4 User manual

 

FOR AC 4-6-6S-9S-12S
Main Features:






 

 










CE






What’s new in this version:
In put sensor normally Closed (NC) type
This controller can operate 2 stations simultaneously

4. On the controller, a Bluetooth icon is displayed,
followed by a 4-digit code.
5. Type in the pairing code and then tap ok. When the
pairing is complete, the phone and the controller
are connected, and the app screen is displayed.
Pairing is required only once. After the initial pairing,
the app. syncs automatically with the controller.
Follow these steps to pair your smartphone: Insert
appropriate batteries to the controller.
1. Download and install the
Galcon BT application from
the stores or by scanning
the barcode.
2. If the app prompts you to
turn on Bluetooth, tap OK
to confirm*. The welcome
screen is displayed.
3. Under unpaired timers, tap
the name of your controller’s
model. If no controller is
shown, tap scan for timers.
Pairing Your Smartphone
with Galcon Controllers
Please Note!
The pairing code will appear on the irrigation
controller screen for about 10 seconds only
* Enable location on your smartphone

4. On the controller, a Bluetooth icon is displayed,
followed by a 4-digit code.
5. Type in the pairing code and then tap ok. When the
pairing is complete, the phone and the controller
are connected, and the app screen is displayed.
Pairing is required only once. After the initial pairing,
the app. syncs automatically with the controller.
Follow these steps to pair your smartphone: Insert
appropriate batteries to the controller.
1. Download and install the
Galcon BT application from
the stores or by scanning
the barcode.
2. If the app prompts you to
turn on Bluetooth, tap OK
to confirm*. The welcome
screen is displayed.
3. Under unpaired timers, tap
the name of your controller’s
model. If no controller is
shown, tap scan for timers.
Pairing Your Smartphone
with Galcon Controllers
Please Note!
The pairing code will appear on the irrigation
controller screen for about 10 seconds only
* Enable location on your smartphone

Resetting the controller
9001 BT
Simultaneously press for 5 seconds.
7101 BT
Simultaneously press for 5 seconds.
11000 BT
Simultaneously press for 5 seconds.
6100 BT
Simultaneously press for 5 seconds.
8000 BT
Simultaneously press for 5 seconds.
Troubleshooting
Check out the following options:
• Make sure you give permission to ‘Location
Services’ when installing the app
• Make sure that ‘Location Services’ is turned on
• Go to the Bluetooth settings on the phone, and
make sure the controller is in the list of devices
- If the controller does not appear in the list,
restart the controller
- If the controller appears in the list, turn off and
turn on Bluetooth on the phone
• Close the app (which will also not run in the
background) and restart it
• If the controller appears in the app but is unable
to connect, try connecting with another phone to
identify the problem

Resetting the controller
9001 BT
Simultaneously press for 5 seconds.
7101 BT
Simultaneously press for 5 seconds.
11000 BT
Simultaneously press for 5 seconds.
6100 BT
Simultaneously press for 5 seconds.
8000 BT
Simultaneously press for 5 seconds.
Troubleshooting
Check out the following options:
•Make sure you give permission to ‘Location
Services’ when installing the app
•Make sure that ‘Location Services’ is turned on
•Go to the Bluetooth settings on the phone, and
make sure the controller is in the list of devices
-If the controller does not appear in the list,
restart the controller
-If the controller appears in the list, turn off and
turn on Bluetooth on the phone
•Close the app (which will also not run in the
background) and restart it
•If the controller appears in the app but is unable
to connect, try connecting with another phone to
identify the problem

3
4
8
11
15
20
24
24
25

1
1.To close the valve, turn the valve handle to the
left to “C” mode (2) (Figure 1).
2.To open the valve, turn the valve handle to the
right to “O” mode (1) (Figure 2)
3.To operate the valve via the controller, turn the
valve handle middle position to “AUTO” mode
(Figure 3).
CLOSE
OPEN
AUTO
1 2
3