Ganz DR8NRT User manual

1

2
Specification & Organization
Specification & Organization Specification & Organization
Specification & Organization -------------------------------------------------- 11
Specifications --------------------------------------------------------- 11
Product Contents List -------------------------------------------------- 13
System Organization ---------------------------------------------------- 14
Product Description
Product Description Product Description
Product Description -------------------------------------------------------- 15
Front panel description --------------------------------------------------- 15
Rear panel description --------------------------------------------------- 16
Remote Controller description --------------------------------------------- 17
HDD
HDDHDD
HDD,
,,
, DVD
DVD DVD
DVD-
--
-RW Connect
RW Connect RW Connect
RW Connect ----------------------------------------------------------- 18
Power On
Power On Power On
Power On ---------------------------------------------------------------- 19
Live Display
Live Display Live Display
Live Display ---------
------------------
--------------------------------------------------------------- 20
Configuring the live display ---------------------------------------------- 20
PTZ
PTZPTZ
PTZ -------------------------------------------------------------------- 21
Search
SearchSearch
Search ----------------------------------------------------------------- 22
Normal Search -------------------------------------------------------- 22
Sequence Search ------------------------------------------------------ 27
Thumbnail Search ----------------------------------------------------- 28
Smart Search ---------------------------------------------------- 29
Ba ck u p
Ba ck u p Ba ck u p
Backup ----------------------------------------------------------- 30
Backup -------------------------------------------------------------- 30
Backup Data Management ----------------------------------------------- 31
Configuration
ConfigurationConfiguration
Configuration-
--
-System
SystemSystem
System ------------------------------------------------------ 32
Camera --------------------------------------------------------- 32
Alarm/Event ------------------------------------------------------ 35
Display ------------------------------------------------------- 41
Au d io - - -- --- - - -- --- -- -- -- -- - -- -- - -- -- -- -- - -- --- -- -- -- -- - -- --- -- - 4 4
User ------------------------------------------------------ 45
Network ------------------------------------------------------- 47
System ------------------------------------------------------- 49
Storage ----------------------------------------------------- 51

3
Configuration
ConfigurationConfiguration
Configuration -
--
-Record
Record Record
Record -------------------------------------------------- 52
Record mode --------------------------------------------------------- 52
Normal rec or d - -- -- -- - -- -- -- - -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- - 54
Intensive record ----------------------------------------------------- 56
Panic record ----------------------------------------------------- 58
S eq u en ce
S eq u en ce S eq u en ce
Sequence -------------------------------------------------------- 59
Di gi t a l Z o o m
Di gi t a l Z o o m Di gi t a l Z o o m
Di gi t a l Z o o m - -- --
- - - - -- - - --
------------------------------------------------------- 60
Keylock
Keylock Keylock
Keylock ---------------------------------------------------------------- 61
Panic Start/Stop
Panic Start/Stop Panic Start/Stop
Panic Start/Stop -----
----------
----------------------------------------------------------- 62
Shutdown
ShutdownShutdown
Shutdown ---------------------------------------------------------------- 63
Error Code List
Error Code List Error Code List
Error Code List ---------------------------------------------------------- 63
RemoteSW installation
RemoteSW installationRemoteSW installation
RemoteSW installation ------------------------------------------------------- 64
System Requirement ---------------------------------------------------- 64
Introduce ------------------------------------------------------------ 66
RemoteSW Local Setup
RemoteSW Local SetupRemoteSW Local Setup
RemoteSW Local Setup ----------------------------------------------------- 66
local setup ---------------------------------------------------- 68
RemoteSW Search
RemoteSW SearchRemoteSW Search
RemoteSW Search --------------
----------------------------
---------------------------------------------------------
--------------------------------------------------------------------------------------
------------------------------------------- 70
Search Function Introduce ------------------------------------------------ 70
Search Method -------------------------------------------------------- 71
Search Option -------------------------------------------------------- 72
RemoteSW DVR System Setup
RemoteSW DVR System SetupRemoteSW DVR System Setup
RemoteSW DVR System Setup ------------------------------------------------- 76
Camera ------------------------------------------------------------ 78
Alarm/Eve nt ------------ ------- - ----------- ------------ --- -------- -- 79
Display ---------------------------------------------------------- 82
Au d io - - -- --- - - -- --- -- -- -- -- - -- -- - -- -- -- -- - -- --- -- -- -- -- - -- --- -- - 8 4
User ----------------------------------------------------------- 84
RemoteSW DVR Record Setup
RemoteSW DVR Record SetupRemoteSW DVR Record Setup
RemoteSW DVR Record Setup ------------------------------------------------- 85
Record Mode ---------------------------------------------------------- 86
Normal record -------------------------------------------------------- 87
Intensive record -------------------------------------------------------- 89
Panic record ---------------------------------------------------------- 90
Web Client Ins tallation
Web Client Ins tallationWeb Client Ins tallation
Web Client Ins tallation ---------------------------- - --- - - ----- ----------- 91

4
Thank you for purchasing the GANZ DIGIMASTER.
This DVR is produced using the most advanced CBC technology and its quality is guaranteed by strict
reliability and compatibility testing.
This manual provides necessary information for the correct use of this product and also contains some
useful tips.
Please read this manual thoroughly before using your DVR in order to prevent possible malfunctions
due to any mishandling.
This manual applies to the DR8NRT/DR16NRT only.
This manual describes the external features of GANZ DIGIMASTER, part names, correct connection
methods for supported domes or pan/tilt receivers, control devices, peripheral devices and the system
setup instructions. It is important to note here that some features, figures, pictures and references can
only be applied to just one model.
• CBC cannot be held responsible if the DVR is damaged due to the use of non-compatible devices
with this product. If you have any doubts, please check.
• CBC cannot be held responsible if the DVR is damaged due to the product being disassembled or
modified by the user.
• This product is qualified for both domestic and industrial use. This product is qualified under
the Radio Equipment Requirements of Korea and acquired international certification including CE
(Europe) and FCC (USA).

5
All copyrights of this manual are reserved by CBC Co., Ltd.
Copyright
©
2006
Any reproduction or republishing of this manual for commercial purposes is prohibited.
It is prohibited to transfer this manual via online media such as, but not limited to, the Internet.
It is also prohibited to post, distribute or translate this manual without permission from CBC.
CBC is not held responsible if the DVR is damaged as a result of improper handling by a user unaware
of how to operate this product or who did not consult this manual before attempting to operate the product.
CBC reserves the right to change the contents of this manual without notice.
CBC reserves all copyrights of registered trademarks in this manual.
Please be aware of the following precautions before installing the DVR.
Avoid positioning the GANZ DIGIMASTER in any place where the unit may come into contact with
moisture, dust, or soot.
• Avoid placing in direct sunlight or near heating appliances.
• Keep the product away from electric shock or magnetic substances.
• Avoid temperature extremes (recommended operation temperature is between 0°C and ~40°C).
• Do not place any conductive material through the ventilation grills.
• Keep the system turned off before installation.
• Ensure that enough space is left for cable connections.
• Place the system on a solid surface with sufficient air ventilation. Avoid any surface that vibrates.
• Placing the system near electronic devices such as radio or TV may cause the product to
malfunction.
• Do not disassemble the product without seeking assistance from the supplier.
• Do not place any heavy object on the system.
• Please keep cleaning the fan filter of front panel.

6
The following are warnings and cautions to ensure user safety and prevent property damage. Please read
the information below thoroughly.

7

8

9

10
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Read all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has
two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety.
When the provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use the attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15) This equipment is indoor use and all the communication wirings are limited to inside of the
building.
16) The socket-outlet shall be installed near the equipment and shall be easily accessible.
17) CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
# Operation Max temperature : 40℃
# USB Load condition: USB Ports( 5 Vdc, Max. 500 mA)

11
SPECIFICATION&ORIGANIZATION
SPECIFICATION&ORIGANIZATIONSPECIFICATION&ORIGANIZATION
SPECIFICATION&ORIGANIZATION
Specifications
Specifications Specifications
Specifications
MODEL DR8NRT,DR16NRT
Operation PENTAPLEX PENTAPLEX performance
( Simultaneous Live Display/Recording/Playback/Archiving/
Networking effectively without interfering each operations)
Video in Channels 16/8
Connection BNC, 1.0Vpp composite 75ohm balanced
Loop through BNC,1.0Vpp composite 75ohm unbalanced, auto termination
Audio in Channels 4
Connection line level unbalanced
Main Displays BNC 1.0Vpp composite 75ohm unbalanced
VGA 15 pin D-SUB 1024 x 768 @ 60Hz
Screen display modes 1 , 4 , 9 , 16 User defined channels for each mode
Sequence Adjustable dwell time, user defined sequences
Spot displays Channels 4 fully programmable
Connection BNC, 1.0Vpp composite 75ohm unbalanced
Display mode Full screen sequence, adjustable dwell time
Audio out Channels 1
Connection RCA, line level unbalanced
External alarm
Inputs 16(16 Open collector TR), NO or NC common ground
Outputs 16, high(+5V) or low(0V) selectable, common ground
User interface On screen display GUI, alpha blending
Control Front panel/IR Remote/USB Mouse
Recording Video CODEC MPEG-4
Resolution options for each channel CIF (352 x 240, 352 x 288), 2 CIF (704 x 240, 704 x 288), D1 (704 x 480, 704 x 576)
Maximum total frame rate 480/240FPS(NTSC) / 400/200 FPS (PAL)
Image quality Highest, High, Standard, Low
Pre-event recording 5 seconds max
Recording modes Continuous / Motion detection / Alarm / User event / Panic
Frame rate options for each channel 30 – 15 – 7.5 – 4 – 2 – 1
Schedule Configurable recording time
limits
Weekly / Daily per Camera
Audio Audio inputs independently assigned to each channel
Motion detection 16 x 16 selectable grid with 10 levels of sensitivity
Covert recording Yes, selectable by channel
Camera title English and Numeric

12
Playback Speed Forward / reverse. 1x, 2x, 3x, 4x, 8x, 16x, 32x, 64x, 128x
Control Front panel buttons and Jog / Shuttle /USB Mouse
Search method Calendar / timeline, event log, Sequence, Thumbnail, Smart Search
Split screen display modes 1,4,16
Audio synchronization Yes at any frame rate
Archiving Storage DVD±RW, USB Memory stick, Network
Format Watermarked AVI
Archive data Independent channels selection (video / audio), backup log, event log
Time Time zone Worldwide, Selectable
DST Yes
PTZ RS-485 Multi protocol, baud rate and speed control for each channel
System Watchdog Yes
Abnormal shutdown detection Yes, with system auto recovery
HDD error detection Yes, SMART monitoring
Network Connection RJ45, 10 / 100 Ethernet
DHCP Yes
DDNS Yes
Two way network audio Yes
Bandwidth management Yes
Remote client Client software Yes, Included
Remote configuration Yes
Remote PTZ control Yes
Email event notification Yes
Storage Maximum Capacity Not limited
Storage 4 x HDD maximum
Recording options Write once / Overwrite
Event handling
Source Alarm in, motion detection, video loss, HDD error, User event
Action Record, alarm out, email no
tification, log, remote client popup, buzzer, full screen
popup
Security User levels ADMIN, MANAGER, USER
Key Lock Yes, password protected
Physical Dimensions 428mm(w) x 475mm(d) x 93mm(h)
Weight 12Kgs

13
SPECIFICATION&ORIGANIZATION
SPECIFICATION&ORIGANIZATIONSPECIFICATION&ORIGANIZATION
SPECIFICATION&ORIGANIZATION
Product Conten
Product ContenProduct Conten
Product Contents List
ts Listts List
ts List
Please check if all the product contents are present after opening the package.
①
①①
①Basic Contents
Remote Controller Instruction Manual Remote Agent
Installation CD
AAA Battery x 2
AC Power Cable
②
②②
②Optional Contents
Internal Hard Disk Drive Internal DVD-RW Drive USB Thumb Drive
DR8NRT,16NRT Unit
DR8NRT,16NRT UnitDR8NRT,16NRT Unit
DR8NRT,16NRT Unit

14
SPECIFICATION&ORIGANIZATION
SPECIFICATION&ORIGANIZATIONSPECIFICATION&ORIGANIZATION
SPECIFICATION&ORIGANIZATION
System Organization
System OrganizationSystem Organization
System Organization
NETWORK
Camera
Alarm Sensor Relay Out
VCR
VGA
Monitor
A/V Monitor
Remote Client PC Image Printer
Video In
Video Out
TCP/IP
Alarm Input/Out
Remote
Controller
DVD-RW
Backup
AVI Backup
WEB Client
USB
USB Mouse

15
PRODUCT DESCRIPTION
PRODUCT DESCRIPTIONPRODUCT DESCRIPTION
PRODUCT DESCRIPTION
Front Panel
Front PanelFront Panel
Front Panel
① Power : System Power On/Off
② DISPLAY : Select Screen Division Mode or Rotation Mode
③ SEQUENCE : Select Sequence Screen Mode
④ PANIC : Trigger Panic Recording Mode and Panic Relay Output
⑤ ZOOM : Digital Zoom on Live or Playback Image
⑥ LOCK : Front Panel Lock Button
⑦ ARCHIVE : Go to Archiving Menu
⑧ PTZ : Go to Camera PTZ Control
⑨ SETUP : Go to System Setup Menu
⑩ SEARCH : Go to Search Menu
⑪ USB PORT: USB Port for use of a USB Memory Stick and/or USB HDD Backup.
⑫ Mouse left Click
⑬ Mouse Right Click
⑭ LED Indicator : Indicates Present System Status. (POWER, REC, NETWORK)
⑮ Channel Selection Buttons (1~8/16) : Select Channel or Input Password
- Directional / Navigation Buttons (UP, DOWN, LEFT, RIGHT, ENTER)
- Remote Controller Input Sensor (IR)
- EJECT : Eject DVD-RW
- ◀ ◀ / ◀ : Focus Adjust (Near/Far) or Reverse Play / Rewind
- Ⅱ: Pause Playback
- ▶ / ▶ ▶ : Iris Adjust (Open / Close) or Forward Play / Fast Forward
- JOG / SHUTTLE : Outer wheel – variable REW or FF; Inner wheel – scroll frame-by frame while
PAUSE.
- HOLD : Hold Current JOG / SHUTTLE Position

16
PRODUCT DESCRIPTION
PRODUCT DESCRIPTIONPRODUCT DESCRIPTION
PRODUCT DESCRIPTION
Rear Panel
Rear PanelRear Panel
Rear Panel
① Video IN / Loop :
: :
: BNC Video Input Port, BNC Video Loop Output
② Monitor out : BNC Monitor Output
SVHS : Output Video by Connected SVHS.
③ Spot #1 ~ #4 : 4 x BNC Output to Individually-Sequenced Spot Monitors
④ Audio In :
: :
: 4 x RCA Audio Line Input Terminal
⑤ Audio Out :
: :
: RCA Audio Line Out Terminal
⑥ Alarm : 16 x Input TTL Alarm/Sensor Input Terminal
⑦ Relay : 16 x Relay Output Terminal
⑧ USB PORT: USB Port for use of a USB Memory Stick and/or USB HDD Backup
⑨ VGA OUT : VGA Main Monitor Output
⑩ RS-232C : Serial Configuration Port for Program Debugging
⑪ RS-485 : Serial Interface for PTZ device connection and control
⑫ RJ-45 jack : 10/100 Ethernet LAN/WAN connection (for Remote Access and Configuration)
⑬ AC Power Input
• For System Installation, please install after turning off System’s Power.
• VGA monitor is the main monitor. Thus if
you connect the CRT monitor with
monitor out, you cannot see the menu.
Tip

17
REMOTE CONTROLLER
REMOTE CONTROLLERREMOTE CONTROLLER
REMOTE CONTROLLER
※ If there are several DVRs together, each DVR must be set with a different ID. You can control all
The DVR’s from one controller, by setting DVR ID on controller using the ID button.
POWER
System
ON/OFF
MENU : Open System Setup Menu
RETURN
Mouse Left Click
ENTER : Mouse right Click
Channel Selection Buttons
Navigation Buttons
: Used for Playback Control,
Menu Navigation, and PTZ/Focus Control
ID
ID Button
Select DVR ID

18
HDD, DVD
HDD, DVDHDD, DVD
HDD, DVD-
--
-RW CONNECTION
RW CONNECTIONRW CONNECTION
RW CONNECTION
Above is the mainboard picture after opening the top cover.
The connection board is in red box
(1) is the port for system disk(master disk). Install the first HDD at this port. (HDD
jumper location should be “Master”).
(2) is also the port to connect additional HDD.
(3) is the port for DVD-RW only. Incase the HDD is connected at this port, HDD would not recognized

19
POWER ON
POWER ONPOWER ON
POWER ON
Press the power button.
The DVR startup screen detects and checks
the HDD and DVD-RW.
After startup process is completed, “logon”
display appears for inputting the Password.
(Default password is just leaving is as empty
column. Next, click the “Logon” button.)
The DVR starts the normal operation and it
shows default display of all 16channels.
Three pop-up displays would show current
system information, live log and live alarm
situation.
C: Continuous Record
M: Motion Record
A: Alarm Record
P: Panic Record
Live System Info
1) Shows percentage of HDD used.
2) User Connection Information
3) Current recording frame information
4) The Backup situation
Live log
It shows the live log.
: Live log can be removed by pressing this
button.
Live Alarm

20
Alarm Detection channel show each channel.
When the operator drags the mouse to the
bottom left of the screen, this pop-up
screen will appear.
By pressing each button, the operator
can turn (On/Off) the functions of the
above pop-up screens.
LIVE DISPLAY
LIVE DISPLAYLIVE DISPLAY
LIVE DISPLAY
Press the mouse right button from live display and the menu screen would be shown.
When “setup” button from front panel is pressed, it will enter “system setup menu of configuration”
directly.
Configuring the Live Display
Configuring the Live DisplayConfiguring the Live Display
Configuring the Live Display
• Display Type: The operator could select 5 different display types.
Camera Arrangement: The operator can edit the camera location for each display type.
After clicking the one of 16 channel buttons, select below section. Then display channel will be changed
according to the selection. Additionally the operator can select next display by clicking the arrow
buttons.
Click the right mouse button
on the
Live Display screen, next c
lick the
DISPLAY
DISPLAY DISPLAY
DISPLAY menu.