Garland P10GMSA User manual

User Guide
P10GMSA / P10GSSA
09/2023
Release Version: 4.28.1

User Guide
AggregatorTAP: Fiber | P10GXXA | 4.28.1
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved. 2
Copyright © 2023 Garland Technology, LLC. All rights reserved.
No part of this document may be reproduced in any form or by any means without prior written permission
of Garland Technology, LLC.
The Garland Technology trademarks, service marks ("Marks") and other Garland Technology trademarks
are the property of Garland Technology, LLC. PacketMAX Series products of marks are trademarks or
registered trademarks of Garland Technology, LLC. You are not permitted to use these Marks without the
prior written consent of Garland Technology.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Garland
Technology and the customer. All or part of the products, services and features described in this
document may not be within the purchase scope or the usage scope. Unless otherwise specified in the
contract, all statements, information, and recommendations in this document are provided "AS IS" without
warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.

User Guide
AggregatorTAP: Fiber | P10GXXA | 4.28.1
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved. 3
Table of Contents
P10GXXA ...................................................................................................................................4
Front Panel.............................................................................................................................4
LED Indications..................................................................................................................4
Interfaces ...............................................................................................................................5
Bypass Mode .....................................................................................................................5
Breakout Mode ..................................................................................................................5
Aggregate Mode ................................................................................................................5
Span Mode ........................................................................................................................5
Span Packet Inject Mode ...................................................................................................5
Rear Panel .............................................................................................................................6
LED Indications..................................................................................................................6
Switch Settings ..................................................................................................................6
Installation Procedure.............................................................................................................7
Optional Rack Mount Bracket .................................................................................................7

User Guide
AggregatorTAP: Fiber | P10GXXA | 4.28.1
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved. 4
P10GXXA
This document describes the front panel, LED indications, interfaces, rear panel, rear switch and
installation procedure for the P10GXXA. The unit supports five application modes, bypass, breakout,
aggregate, span and span packet inject. LFP and fail mode (open) are supported on the network ports
for the bypass, breakout, and aggregate modes.
Front Panel
LED Indications
BP Bypass LED
Port 1 L/A1 Link/Activity/LFP LED
Port 2 L/A2 Link/Activity LFP LED
Port 3 H/M N/A
Port 3 L/A Link/Activity LED
Port 4 H/M N/A
Port 4 L/A Link/Activity LED

User Guide
AggregatorTAP: Fiber | P10GXXA | 4.28.1
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved. 5
Interfaces
Bypass Mode
Port 1 Network Port
Port 2 Network Port
Port 3 Inline Appliance Port
Port 4 Inline Appliance Port
Breakout Mode
Port 1 Network Port
Port 2 Network Port
Port 3 Breakout Port Ingress Port 1
Port 4 Breakout Port Ingress Port 2
Aggregate Mode
Port 1 Network Port
Port 2 Network Port
Port 3 Aggregate Port Ingress Port 1 / Port 2
Port 4 Aggregate Port Ingress Port 1 / Port 2
Span Mode
Port 1 Network Port Ingress Span Port 2 / Port 3 / Port 4
Port 2 Span Port Ingress Port 1
Port 3 Span Port Ingress Port 1
Port 4 Span Port Ingress Port 1
Span Packet Inject Mode
Port 1 Network Port Ingress Span Port 2 / Port 3 / Port 4
Network Port Egress Packet Inject Port 2 / Port 3 / Port 4
Port 2 Span Port Ingress Port 1
Packet Inject Port Egress Port 1
Port 3 Span Port Ingress Port 1
Packet Inject Port Egress Port 1
Port 4 Span Port Ingress Port 1
Packet Inject Port Egress Port 1

User Guide
AggregatorTAP: Fiber | P10GXXA | 4.28.1
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved. 6
Rear Panel
LED Indications
PS1 Power Supply 1 LED
PS2 Power Supply 2 LED
Switch Settings
Switch 1 Port Speed On-10G Off-1G
Switch 2 LFP On-Enabled Off-Disabled
Switch 3/4/5 Mode Bypass 3-Off 4-Off 5-Off
Breakout 3-On 4-Off 5-Off
Aggregate 3-Off 4-On 5-Off
Span 3-On 4-On 5-Off
Span (PI) 3-Off 4-Off 5-On
Switch 6 Port 3 On-10G Off-1G
Switch 7 Port 4On-10G Off-1G
Switch 8 N/A Off
* The unit must be power cycled if the switch settings are modified.

User Guide
AggregatorTAP: Fiber | P10GXXA | 4.28.1
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved. 7
Installation Procedure
1. The P10GXXA may be installed in any available 1U slot of a network rack and secured with rack
mount screws or in the optional rack mount bracket, sold separately. The optional rack mount bracket
is shown below.
2. Set the switches on the rear of the unit for the desired speed, LFP option and application.
3. Connect power cables to PS1 and PS2 on the rear panel and plug into available power sources.
4. Verify that the PS1 LED and PS2 LED on the rear panel are illuminated.
5. Insert the correct SFPs for the desired speed and application. This step can be done prior to power on
if desired.
6. Connect the cables or fibers to the desired ports for the application.
7. Verify the L/A LEDs are illuminated green indicating link.
8. Verify the L/A LEDs are flashing green indicating link and traffic.
Optional Rack Mount Bracket