Garland P10GMSBPE User manual

EdgeSafeTM
Bypass Network TAP
Quick Start Guide By Garland Technology
P10GMSBPE / P10GSSBPE
Garland Technology: Bypass System
Firmware Rev Level: 1.1.11
Office: 716-242-8500
garlandtechnology.com/support
garlandtechnology.com



USER GUIDE
EdgeSafe | P10GxxBPE
Copyright © 2020 Garland Technology, LLC. All rights reserved.
No part of this document may be reproduced in any form or by any means without prior written permission of Garland
Technology, LLC.
The Garland Technology trademarks, service marks ("Marks") and other Garland Technology trademarks are the property of
Garland Technology, LLC. EdgeLens Series products of marks are trademarks or registered trademarks of Garland
Technology, LLC. You are not permitted to use these Marks without the prior written consent of Garland Technology.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Garland Technology and the
customer. All or part of the products, services and features described in this document may not be within the purchase scope
or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this
document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the preparation of this
document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not
constitute the warranty of any kind, express or implied.
Table of contents
1. P10GxxBPE DashBoard ………………………………………………………………………………………….3
2. P10GxxBPE System ………………………………………………………………………………………...……..4
3. P10GxxBPE Port Info ………………………………………………………………………………………….…..9
4. P10GxxBPE TAP Modes ……..…………………………………………………………………………....……..12
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 2

USER GUIDE
EdgeSafe | P10GxxBPE
P10GxxBPE Dashboard
L/A1 - Link/Activity LED Network Port 1
L/A2 - Link/Activity LED Network Port 2
BP - Bypass LED if placed in bypass mode
L/A Port 3 - Link/Activity LED Port 3
L/A Port 4 - Link/Activity LED Port 4
H/M Port 3 - Heartbeat missed if placed in bypass mode
H/M Port 4 - Heartbeat missed if placed in bypass mode
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 3

USER GUIDE
EdgeSafe | P10GxxBPE
P10GxxBPE System
Select System to display or change the system options.
General -
Displays the current general system configuration.
General - select to display the current chassis name and key press
timeout
Edit Configuration - select to change the chassis name or key press timeout
Chassis Name - enter 1 to 32 characters
Key Press Timeout - enter 60 to 3600 seconds, default 300
Save - select to save any changes
Cancel - select to return to general system settings
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 4

USER GUIDE
EdgeSafe | P10GxxBPE
User Settings -
Displays the current user configuration.
Username & Password - select to change the local GUI and serial port username
and password (default=admin/gtadmin1). Cannot change if
logged in via TACACS
Authentication Settings - select to change the login authentication settings
Local Authentication - enabled by default, may be disabled if TACACS authentication
is enabled
TACACS Authentication - select to enable TACACS authentication
IP Address - enter the TACACS server IP address
Secret Word - enter to use a key on the TACACS server (3-20 characters)
Save - select to save any changes
Cancel - select to return to user settings
TACACS Test - select to test the TACACS authentication
Username - enter the username defined in the TACACS server
Password - enter the password defined in the TACACS server
Test - select to verify username/password authentication to
the TACACS server
TACACS Ping - select to ping the TACACS server IP address
Network Settings -
Displays the current network configuration.
Edit Settings - select to change the network settings
Enable DHCP - select to enable DHCP
IP Address - displays the management IP address defined at turn up. If
desired a new management IP address may be entered
Mask - displays the mask defined at turn up. If desired a new mask
may be entered
Gateway - displays the gateway defined at turn up. If desired a new
gateway may be entered
DNS1 - enter the desired DNS1 server
DNS2 - enter the desired DNS2 server
Save - select to save any changes
Cancel - select to return to network settings
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 5

USER GUIDE
EdgeSafe | P10GxxBPE
Date & Time -
Displays the current date and time configuration.
Edit Settings - select to change the network settings
Timezone - displays the current timezone. May be changed by using
the pull down panel
UTC - displays the utc. May be changed by using the pull down panel
NTP - select to enable NTP timing
Use Pool - select to use a pool for NTP timing
IP Address - enter the IP address for the NTP server used for NTP timing
Save - select to save any changes
Cancel - select to return to date & time settings
Syslog -
Displays the current syslog configuration.
Edit Settings - select to change the syslog configuration
Enable Syslog Config - select to enable syslog
Unit ID - enter the unit ID for syslog messages, optional
Protocol - displays the current protocol, default UDP. May be changed to
TCP by using the pull down panel
IP Address - displays the current syslog server. If desired a new syslog
server may be entered
Port - displays the current udp/tcp port, default 514. If desired a new
port number may be entered
Save - select to save any changes
Cancel - select to return to syslog configuration
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 6

USER GUIDE
EdgeSafe | P10GxxBPE
Snmp -
Displays the current SNMP configuration.
Edit Configuration - select to change the snmp configuration
Enable SNMP Config - select to enable snmp
Access Port - displays the current access port, default 161. If desired a new
port number may be entered
Trap Port - displays the current trap port, default 162. If desired a new
port number may be entered
Trap IP Address - displays the current snmp server. If desired a new snmp
server may be entered
Protocol - displays the current protocol, default V2 Read/Write. If desired
the protocol may be changed to V2 Read Only or V3 by using
the pull down panel
V2 Community Password - the default is gtpublic, but not visible. If desired a new
V2 community password may be entered
If the protocol was changed to V3 the following options will appear. The unit supports
snmp V3 MD5 and DES.
V3 User - enter the snmp V3 username, 8-20 characters
V3 Auth Pass - enter the snmp V3 authentication password, 8-20 characters
V3 Priv Pass - enter the snmp V3 privacy password, 8-20 characters
Save - select to save any changes
Cancel - select to return to snmp configuration
Export Configuration -
Provides the ability to download the unit’s configuration. The date/time and network settings are
excluded. The download path is determined by the browser.
Export Configuration - select to to download the current configuration.
GREEN Export - select to start download
Import Configuration -
Provides the ability to upload a new configuration file to the unit. This will overwrite the unit’s current
configuration excluding the date/time and network settings.
Import Configuration - select to upload a configuration file to the unit
Choose File - select to choose the configuration file
Upload - select to upload the configuration file
Restart Import - select to choose a different configuration file or cancel
Configure - select to load the configuration file on the unit
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 7

USER GUIDE
EdgeSafe | P10GxxBPE
Software Upgrade -
Provides the ability to upgrade the unit’s firmware. All of the existing configurations will be saved to
the new firmware.
Software Upgrade - select to upgrade the unit’s firmware
Choose File - select to choose the firmware
Reset - select to choose a different firmware or cancel
Upload - select to load the firmware on the unit.
Reboot -
Provides the ability to reboot the unit. This will affect traffic for @ 15 seconds.
Reboot - select to reboot the unit
Reboot - select to reboot the unit
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 8

USER GUIDE
EdgeSafe | P10GxxBPE
P10GxxBPE Port Info
Select Port Info to display or change port configuration and display port statistics.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 9

USER GUIDE
EdgeSafe | P10GxxBPE
Port Configuration -
Displays the current port configurations.
Port - displays the physical port number
Description - displays the current port descriptions, default port01 to port04
port01-port04 - select port 01-04 in the description column to change the
port’s description.
Edit Description - enter the new port description (1 to 32 characters)
Set - select to save the new port description
Cancel - select to cancel and return to port configuration
Link - displays the current port link status. GREEN port has
link. RED port does not have link.
Set Speed - displays the current port speed, default 10G. Use the pull down
panel to change the port speed to 1G, Auto is non-functional
Speed - displays current port speed
Mode - select the pull down panel to change the port mode,
default=Normal. The port mode options include: Nornal,
Loopback and Listen Only. Force Link in non-functional.
SFP Data - displays the manufacturer and part number of a SFP or QSFP
inserted into the unit. Not all SFPs or QSFPs support this
function
Split - non-functional
Save - select to save any changes
Refresh - select to refresh the port configurations
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 10

USER GUIDE
EdgeSafe | P10GxxBPE
Port Statistics -
Displays the current port statistics. The statistics do not automatically refresh. Select Refresh to
update the statistics.
Port - displays the physical port number
Receive Packets - displays the number of receive packets
Receive Discards - displays the number of receive packets discarded
Receive Errors - displays the number of receive packet errors
Transmit Packets - displays the number of transmit packets
Transmit Discards - displays the number of transmit packets discarded
Transmit Errors - displays the number of transmit packet errors
Refresh - select to update the port statistics
Clear - select to clear and refresh the port statistics
INT10G8xx56 Modes
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 11

USER GUIDE
EdgeSafe | P10GxxBPE
Select Bypass Taps to display or change the bypass tap settings.
Displays the current mode.
The P10GxxBPE supports the following modes, Bypass, Span, Span (Packet Inject), Breakout, Filter and
Aggregate.
Bypass Mode -
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 12

USER GUIDE
EdgeSafe | P10GxxBPE
Mode - use the mode pull down panel select Bypass
Set - select to set the unit in the bypass mode
Bypass Taps - select Bypass Taps
Provides access to display or change the bypass tap settings, the Heartbeat per second rate
and the number of lost heartbeats
Displays the current tap status.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 13

USER GUIDE
EdgeSafe | P10GxxBPE
P1 - Tap Network Port 1
P2 - Tap Network Port 2
Tap Colored Area - displays the current tap status. The tap status conditions
include, GREEN Inline, RED Bypass, GREEN Inline (Forced),
RED Bypass (Forced)
Edit Pencil - select to add a description for the tap
Description box - enter the desired tap description, 1-15 characters
Check - select to save the new tap description
No - select to discard changes and close tap description
Heartbeat Settings - select to display or change the heartbeat settings. The
heartbeat settings control taps 1-4
No. Of Lost HB Packets (10-500) - defines the number of heartbeats that must be lost for the tap
to switch from inline to bypass
Heartbeats per second (10-100) - defines the number of heartbeats that are sent per second
Tap Settings -
Changes to the tap include:
Tap Modes Active, Force Bypass, Force inline
Fail Mode Open
LFP enable/disable
Reverse Bypass enable/disable
To change the tap’s settings, place the cursor on the tap and double press the left mouse button.
The tap panel will appear.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 14

USER GUIDE
EdgeSafe | P10GxxBPE
.
P1 - Tap Network Port 1
P2 - Tap Network Port 2
3 - Inline Appliance (bypass) Port
4 - Inline Appliance (bypass) Port
Edit Tap Settings - select to display or change the current tap settings
Save - select to save changes to the tap settings
Cancel - select to disregard changes to the tap settings and
return to bypass tap
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 15

USER GUIDE
EdgeSafe | P10GxxBPE
Edit Tap Settings - select to display or change the current tap settings
The default settings:
TAP Modes - Active
Fail Mode - Open
Enable LFP - disabled
Reverse Bypass - disabled
Change the tap by selecting the new setting(s).
Accept - select to change the tap with the new settings. After selecting
accept the tap display will appear. Save must be selected
on tap display for the new tap settings to be saved
Cancel - select to disregard changes or keep original settings
and return to the tap display
Span Mode -
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 16

USER GUIDE
EdgeSafe | P10GxxBPE
Mode - use the mode pull down panel select Span
Set - select to set the unit in the span mode
1 - Network Port
2 - Span Port
3 - Span Port
4 - Span Port
In this mode ingress traffic into network port 1 is sent to span ports 2, 3 and 4. In a loss of power
condition, traffic from network port 1 is sent to span port 2, but not span ports 3 and 4.
Span (Packet Inject) Mode -
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 17

USER GUIDE
EdgeSafe | P10GxxBPE
Mode - use the mode pull down panel select Span (Packet Inject)
Set - select to set the unit in the span (packet inject) mode
1 - Network Port
2 - Span (Packet Inject) Port
3 - Span (Packet Inject) Port
4 - Span (Packet Inject) Port
In this mode ingress traffic into network port 1 is sent to span ports 2, 3 and 4. Ingress traffic from packet inject
ports 2, 3 and 4 are sent to network port 1. In a loss of power condition, traffic from network port 1 is sent to span
port 2, but not span ports 3 and 4. Traffic from packet inject port 2 is sent to network port 1, but not from packet
inject ports 3 or 4.
Breakout Mode -
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 18

USER GUIDE
EdgeSafe | P10GxxBPE
Mode - use the mode pull down panel select Breakout
Set - select to set the unit in the breakout mode
1 - Network Port
2 - Network Port
3 - Breakout Port (ingress traffic from network port 1)
4 - Breakout Port (ingress traffic from network port 2)
In this mode ingress traffic into network port 1 is sent to network port 2 and breakout port 3. Ingress traffic into
network port 2 is sent to network port 1 and breakout port 4. In a loss of power condition, ingress traffic from
network port 1 is sent to network port 2 and ingress traffic from network port 2 is sent to network port 1, but there
will be no breakout traffic to ports 3 or 4.
Aggregate Mode -
Mode - use the mode pull down panel select Aggregate
Set - select to set the unit in the aggregate mode
1 - Network Port
2 - Network Port
3 - Aggregate Port
4 - Aggregate Port
In this mode ingress traffic into network port 1 is sent to network port 2 and aggregate ports 3 and 4. Ingress
traffic into network port 2 is sent to network port 1 and aggregate ports 3 and 4. In a loss of power condition,
ingress traffic from network port 1 is sent to network port 2 and ingress traffic from network port 2 is sent to
network port 1, but there will be no aggregate traffic to ports 3 or 4.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 19

USER GUIDE
EdgeSafe | P10GxxBPE
Filter Mode -
Mode - use the mode pull down panel select Filter
Set - select to set the unit in the filter mode
Packet Broker - select Packet Broker
Provides access to create, display or change, Filter Templates, Config Maps, Filters or Stats.
Displays the current packet broker configurations.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2020 Garland Technology, LLC. All rights reserved. 20