GeChic On-Lap 1306H-R User manual

On-Lap 1306H-R
On-Lap 1306E-R
User Manual
ユーザーガイド

Noces, Cauons & Warranty Exclusions
LCD Pixel Statement
FCC Statement & CE Conformity
WEEE Symbol Informaon
—I
—II
—II
—III
Chapter 1 Parts of On Lap Monitor & Accessories —1
Secon 1 Parts Descripon —1
Secon 2 Accessories Descripon —2
Chapter 2 Installaon Instrucons —2
Secon 1 Instrucons for Using Monitor and Protecve Cover Stand —2
Secon 2 Connect to Apple® MacBook Pro/Air or Other Devices
Supporng USB Type-C(DP Alt) Mode —4
Secon 3 Connect to Smartphone (Support USB Type-C (DP Alt)
mode) —4
Secon 4 Connect to PC, Game Console or Other Devices Sup-
porng HDMI Output —4
Secon 5 Connect to Headphone or Speaker —5
Chapter 3 Hot Keys, LED and OSD Instrucons —6
Secon 1 Hot Keys & LED Indicaons —6
Secon 2 OSD Descripon —6
Chapter 4 Display Seng of Extended Display —8
Secon 1 Sengs of Extended Display on Windows 10 —8
Secon 2 Sengs of Extended Display on Mac (OS X) —8
Chapter 5 Product Specicaon —9
Secon 1 General Specicaon —9
Secon 2 Supported Operang Modes —9
Secon 3 Supported Video Modes —10
Chapter 6 Troubleshoong —11
Table of Contents
English

—IV
—V
—V
—12
—12
—13
—13
—13
、
—15
—15
—16
—17
—17
—17
—18
—20
—20
—20
—21
—21
—22
—22
—23
日
本
語

Noces, Cauons & Warranty Exclusions
Warning: The sign alerts you to potenal hazards that can hurt
you or damage the product.
1. When carrying On-Lap Monitor, please put it into the protecve cover
with glass side inward and avoid pressing the monitor violently and
rubbing the glass surface by any sharp objects.
2. When plugging in/out the cables, do make sure the force exerts in hori-
zontal direcon -do not shake the port or plug it in vercal direcon.
Any damage caused by wrong plug urging is not included in the warranty
coverage.
3. The power input specicaon for On-Lap monitor is 5V 2A DC current.
Inpung On-Lap Monitor more than 5V can cause shortages, and this
will void the GeChic manufacturer's Warranty. We suggest you to con-
nect both connectors of the USB power cable to your desktop΄s USB
ports or use GeChic 5V-2A charger.
4. Part of On-Lap Monitor or its protecve Cover contains magnets, please
put On-Lap Monitor away from hard drive or any device that may be
eected or damaged by magnets. Please put the magnec buckle of
protecve cover away from your desktop when the PC is in sleep mode
or boosng.
5. Cleaning On-Lap Monitor Unplug the power input before cleaning.
Please use so cloth to clean touch screen. For stubborn stains, please
use lightly-dampened cloth to wipe again. Do not use benzene, alcohol,
thinner, ammonia, abrasive cleaners, compressed air or other corrosive
solvents. These solvents may cause permanent damage on the screen or
leave non-removable stain.
6. Please do not place the monitor on a shaky or unstable table, cupboard
or trolley and do not use the On-Lap Monitor on a moving vehicle. The
Product may be severely damaged from overturning or falling.
7. The product is not waterproof. Do not use this product in or near water.
8. Do not insert any object into the Product΄s slots or gaps. Do not disas-
semble the monitor in any way.
9. High Volume Warning: High volume can lead to lasng damage to your
hearing. Please check the volume sengs before reproducing any
sound.
10.Overuse of the monitor may result in vision damage. For every 30
minutes with the monitor, give your eyes 10 minutes break. Avoid chil-
dren under age 2 to watch with the monitor; prevent children over age 2
from watching with the monitor over 1 hour per day.
11.Exclusions from Warranty Service
Please read the warranty terms below carefully, and follow the usage
guide and precauonary notes. Please keep this manual for future refer-
ence.
GeChic does not warrant uninterrupted or error-free operaon of this
Product. The warranty only covers failure /malfuncon under normal use
condions during warranty period. The warranty does not apply to the
following condions:
I

LCD Pixel Statement
(1)The bar code has been removed or worn down, and cannot be iden-
ed.
(2)This product has been modied, disassembled, or reed.
(3)Display and touch funcon working normally; only variaon in appear-
ance (i.e., ageing, arion, scratch, color changing and etc.).
(4)Any breakdown caused by power supply. (i.e., inpung power over 5V or
unsteady current)
(5)Any damage caused by disoperaon or failure to follow this manual. (i.e.,
Plug or unplug the cable in wrong direcon and causing damage on cable
or monitor.)
(6)Any damage caused by hing or cracking monitor accidentally or
purposely, or collapsing or overturning monitor.
II
There is slightly uneven brightness on the screen when displaying dierent
screen paern. The LCD screen has 99.99% or more eecve pixels. 0.01% of
pixels or less may not light or may light incorrectly. The On-Lap monitor uses
a high quality LCD panel. Nevertheless, pixels on the LCD screen may not light
or appear as red or black dots. All the above are normal with the LCD monitor
and will not aect the normal usage of the product.
Avoid placing the monitor against sun-light, or it may damage the monitor.
An aerimage of the previous screen may remain, when the same image is
displayed for hours. In this case, the screen is recovered slowly by turning o
the power for a few hours.
Noce: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15B of the FCC Rules. These limits
are designed to provide reasonable protecon against harmful interference
in a residenal installaon.
If this equipment does cause harmful interference to radio or television re-
cepon, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separaon between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Cauon:
Changes or modicaons not expressly approved by GeChic Corp. could void
the user's authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modicaon to this equipment. It is the responsibilies of
the user to correct such interference.
Federal Communicaons Commission (FCC)
Class B Statement

CE Declaraon of Conformity
This product complies with the following standards:
●EN 62368-1:2014+A11:2017 (Safety requirement of Audio/video, infor-
maon and communicaon technology equipment)
●EN 55032:2015 Class B(Radio Disturbance requirement of Informaon
Technology Equipment).
●EN55024:2010+A1:2015(Immunity requirement of Informaon Technolo-
gy Equipment).
●EN 61000-3-2:2014 (Harmonic current emissions).
●EN 61000-3-3:2013 (Voltage uctuaons & icker) following provisions of
direcves applicable.
●AS/NZS CISPR 32: 2015
●2014/35/EU (Low Voltage Direcve).
●2004/108/EC (EMC Direcve).
●2005/32/EC (EuP Direcve, EC No. 1275/2008 mplemenng Direcve for
Standby and O mode power consumpon) and is produced by a manu-
facturing organizaon on ISO9000 level.
III
WEEE Symbol Informaon
This symbol on the product, accessories or literature indicates
that this product and its electronic accessories (e.g., adapter,
cables, and Rear Dock) must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of
these items by handing it over to a designated collecon point for
the recycling of waste electrical and electronic equipment.
For more informaon about where you can drop o your waste
equipment for recycling, please contact your local city oce, your household
waste disposal service or the shop where you purchased the product.
For Disposal in Countries Outside of the European Union
If you wish to discard this product and its accessories in other area and coun-
tries, please contact your local government for applicable laws and regula-
ons governing the disposal of this product.

1
Chapter 1 Parts of On Lap Product & Accessories
Secon 1 Parts Descripon
Fig.: Part descripon of 1306 Cover Stand
Fig.: 1306 Buons, LED Lights & Audio Jack Descripon
Fig: On-Lap 1306 Monitor & Connecon Ports

2
Secon 2 Accessories Descripon
Accessory 1306H-R1306E-R
HDMI-A to Micro HDMI Video Cable(1.2m)*1
○○
USB Type-C Power/ Video Cable(1.0m)*1
○○
5V 2A Adapter *1
○-
USB-C(female) to USB-A(male) Adapter *1○○
2. Oponal Accessories
Product Name Descripon
USB Type-C Video and Independ-
ent Power Y-Cable(0.5m) To connect this cable to smartphone and On-Lap 1306, please do follow the steps below.○
1Connect the BLACK
USB-C plug to the smartphone. ○
2Connect the BLUE USB-
C plug to On-Lap 1306. ○
3Connect the BLUE USB-A plug
to the power bank to power 1306 independently.
HDMI-A to Micro-HDMI Video
Cable (2.1m) One plug is HDMI-A (male) for connecng to computer΄s HDMI-A port ; the other plug is micro-HDMI (male) for
connecng to On-Lap 1306 monitor.
Micro-HDMI to Micro-HDMI
Video Cable (1.2m) One plug is micro HDMI (male) for camera’s micro HDMI port ; the other plug is micro-HDMI (male) for connecng
to On-Lap 1306 monitor.
Mini-HDMI to Micro-HDMI Video
Cable (2.1m) One plug is mini-HDMI (male) for camera΄s mini-HDMI port ; the other plug is micro-HDM (male) connecng to
On-Lap 1306 monitor.
USB-A to USB-C Power and Touch
Signal Cable (2.1m) One plug is USB-A (male) for adapter/ computer USB port; the other one is USB-C (male) for connecng to
1306.
1. Standard Accessories
Chapter 2 Installaon Instrucons
Secon 1 Instrucons for using Monitor and Protecve Cover Stand
1. The method of using the Cover Stand
As shown in the g., ○
1Detach the magnet buckle of the stand from top.
○
2Fold the rubber side of the magnec buckle inward. ○ 3Aach the
rubber side to the mental plate. Shi the posion of the magnet buckle
aached up or down to adjust the monitor’s viewing angles.
Watch How-to Videos

3
The min. viewing angle of hori-
zontal display is 40 degrees. Do not
aach the rubber side of the mag-
nec buckle higher than 12cm from
the boom of the sheet mental,
otherwise it may cause the monitor overturning.
○
2
○
1○
3
2. Take out and Set up the Monitor
As the g. below, rotate aside the Cover Locks rstly, and take the monitor out. Then turn
the monitor's backside to the Protecve Cover: ①Put the boom half of the monitor into the
Protecve Cover, and ②Put the top half of the monitor into the Protecve Cover. Rotate
down the Cover Locks to prevent the monitor from sliding out.
3. Store the Monitor in the Protecve Cover
When not in use, please put the monitor back in the Protecve Cover with its backside
outward. Please also rotate down the Cover Lock to prevent the monitor from sliding out.
Fig: Put Monitor back in the Protecve Cover
Place the connecter area in the
Indentaon of Protecve Cover
Warning: Please keep the backside hump of the monitor downward in the Protecve Cover.
If the monitor is put upside down in the Protecve Cover, it may cause the scratches and
the Cover Locks cannot be locked on.

4
Secon 2 Connect to Apple® MacBook Pro/Air or Other Devices
Supporng USB Type-C(DP Alt) Mode
※Noce 1: USB Type-C port on PC, smartphone or any devices must meet the following
two condions in order to connect to On-Lap 1306.
▲USB Type-C port must support DisplayPort Alternate Mode (USB Type-C(DC Alt))
▲USB Type-C port must output 5V 1.5A current to On-Lap1306 monitor.
※Noce 2: Products such as tablet PCs or smart phones may not be able to stably out-
put 1.5A current to the On-Lap1306 monitor, and the On-Lap 1306 monitor may icker
due to low input current. Please purchase the oponal accessory, USB Type-C Video and
Independent Power Y-Cable(0.5m), for connecng to smartphone and On-Lap 1306, and
a power bank to provide enough current to On-Lap 1306.
As shown in the gure, use the USB
Type-C power/video cable (1.0 m) to
connect to the USB Type-C port on
the PC that supports the
"DisplayPort Alternate Mode". The
PC will output current and video
signals through the USB Type-C port
to the monitor. It is not necessary to
use a charger and a HDMI cable to
connect the monitor in this case.
Secon 3 Connect to Smartphone (Support USB Type-C (DP Alt) mode)
As shown in the g., please use USB Type-C Video and Independent Power Y-Cable (oponal
accessory) and connect to smartphone phone and mobile power by the steps below.
○
1Insert the BLACK USB-C plug into the USB-C port on your smartphone.
○
2 Plug the BLUE USB-C plug into the
USB-C port on the On-Lap1306.
○
3 Finally, connect the BLUE USB-A
plug to the power bank and turn on
the power.
Noce: You should deliver power
current to On-Lap1306 in step 3. If
the current is supplied to On-Lap
1306 by step 1 or 2, the monitor
would be turned on before the
smartphone is ready to transmit
signals in me. This will result in
video connecon fail in DP Alt mode.
1. Connect to a Laptop or Desktop PC
As shown in the g. below, use USB Type-C Power/ Video Cable (1.0m) to connect to USB-C
port on PC or convert either end of USB-C to USB-A by USB-C(female) to USB-A(male)
Adapter to
Secon 4 Connect to PC, Game Console or Other Devices that
Supporng HDMI Output

Secon 5 Connect to Headphone or Speaker
As shown in g. below, connect a headphone or external speakers to the Headphone out port
on the monitor, and then connect HDMI-A to Micro-HDMI video cable (1.2m) to a PC, a game
console or other products with HDMI-A port. Or, if a PC’s USB Type-C port supports
“DisplayPort Alternate Mode”, please choose USB Type-C Video Cable to connect to USB Type
-C port.
connect to a 5V-2A power adapter/
PC. Use HDMI-A to Micro HDMI
Video Cable(1.2m) to connect to the
HDMI port on PC.
2. Connect to Nintendo® Switch
As shown in g. below, for power 1306 on, please convert either end of USB Type-C Power/
Video Cable(1.0m) by USB-C(famale) to USB-A(male) Adapter to connect to a 5V 2A power
adapter, and connect the other end to 1306. Next, connect HDMI-A to Micro-HDMI Video
Cable(1.2m) to SWITCH Dock's HDMI-A port and 1306's micro HDMI port.
5
※Noce: Headphone out port supports 2-channel audio output. DO
NOT plug in microphone's audio input cable (Audio in). If the sound
format of PC or game console is 5 or 7 channels, it may cause the
headphones not be able to output all sounds (for example, the vocals
disappear in the game). Please select 2-channel audio output in sound
sengs of PC or game console.
or

6
Hot Keys Descripon:
Power Press the Power Buon to power on/o the Monitor.
Exit In the OSD panel, press the Exit Buon to exit and back to the
previous page.
Menu/Select Press the Menu Buon to launch OSD panel. In OSD panel,
press this buon to select and enter the next page.
Increase
Volume/UP
Press this Buon to show "Volume bar." In the OSD menu,
press this buon to move up or to the le. Press and hold this
buon to increase the volume connuously.
Decrease
Volume/Down
Press this Buon to show "Volume bar" In the OSD menu,
press this buon to move down or to the right. Press and hold
this buon to decrease the volume connuously.
+ Reset Press both "Increase Volume/Down" and "Exit" at the same
me and OSD will be reset as the factory sengs.
+ Mute Press both " Increase Volume/Up" and "Decrease Volume/
Down" at the same me to enable "Mute" mode. Press these
two buons again to release mute mode.
+ Lock power
buon
Press both" Menu" and "Decrease Volume/Down" at the same
me to lock the power buon. Press these two buons again
to unlock power buon.
+ Lock OSD buon Press both" Menu" and "Increase Volume/Up" at the same
me to lock OSD buons. Press these two buons again to
unlock OSD buon.
Secon 2 OSD Descripon
When turning on On-Lap monitor at the rst me, the "Language Select" menu appears on
the le top. Please press " Menu/Select" buon to choose the language you like, then
the "Language Select" menu won't appear next me. If press "Exit" buon to disable the
"Language Select" menu, it will appear again when powering on the monitor next me.
1. Basic Buon Operaon
Press buon to launch the OSD panel. Press or to view the items. Press to
launch the selected item. If the selected item has sub-items, press again to launch the
Chapter 3 Hot Keys, LED and OSD Instrucons
Secon 1 Hot Keys & LED Indicaons
Do not press any two shortcut keys at the same me, otherwise the buons may not re-
spond or react incorrectly.
LED Light Descripon:
LED Light: It shows green light when turning on On-Lap Monitor and shows red light when
stand by. There is no light when the monitor is o.

7
the sub-items, and press or to select the sengs of sub-items. To exit, press . Re-
peat the steps above to adjust the other sengs.
2. Display Sengs
As the g. shown, enter "Display Sengs" to adjust
"Brightness", "Contrast", "Sharpness", and the other func-
ons.
1) ECO Mode: The maximum brightness is at 50 in ECO
Mode.
2) Auto Adjust: Launch "Auto Contrast Adjust" and
"Auto Brightness Adjust" to adjust brightness and
contrast automacally to ensure the highest quality
when displaying moving images.
3. Color Sengs
1) Color Eect: If the PC image output format is RGB
Limited, it is recommended to select "Standard 1"; if
it is RGB Full format, it is recommended to select
"Standard 2". Select "Phone" mode to make the
colors more vivid; select "Movie" mode to display the
dark scene more clearly.
2) Blue Light Reducon: Select "On" to reduces the
screen's blue light automacally.
3) Color Temperature: Select "Cool" to increase the blue
color of the image; Select "Warm" to increase the red
color of the image. Select "User" to adjust the RGB
color sengs manually.
4. Aspect Rao
1) Aspect rao: When select "16:9 Full Screen", the
monitor displays a 16:9 image in full screen. When
select 4:3, the monitor displays a 4:3 image with le-
right side black borders to ll the 16:9 screen. When
select "Original", the monitor displays the image in its
original size.
2) Overscan: only available when inpung HDMI video
signal (ex:1080P/720P). Enabling this funcon allows
you to calibrate the display area.
5. OSD Menu
1) Language Select: Change to the other language.
2) H. Posion: Move the OSD menu le/right.
3) V. Posion: Move the OSD menu up/down
4) OSD Timer (sec): Adjust the idle me before OSD
menu disappears.
5) OSD Transparency: Make the OSD menu transparent
to show the background.
6) Auto Power Off: Select "On" to launch this function, when no
image displayed on the screen, the monitor will enter Standby
mode, and power off itself after 15 minutes. Select "Off" to
disable this function. The monitor will stay in standby mode and
will not power off.
7) Power On/O Indicator: Select "O" to turn o the
Power On/O Indicator.
8) Power Buon Lock: Select "On" to lock the Power
Buon.
6. Audio: Adjust the audio volume or select silent mode.

Secon 2 Sengs of Extended Display on Mac (OS X)
Click , then select 【System Preference】→ choose 【Arrangement】tab, and uncheck
"Mirror Displays". Select one of the blue rectangles, and drag to the desired posion .Click
【Display】tab, select resoluon of the laptop rstly, then click "Gather Windows", and
select resoluon to "1080p" for On-Lap 1306.
8
6. Input Source:
1) Input Source: Select HDMI (input from HDMI port) or
USB type-C (input from USB Type-C).
2) Auto Search: When "On" is selected, the monitor will
detect two video input sources in sequence, and the
monitor will display the rst one read. When "O" is
selected, only the video source selected in Input
Source will be displayed. If no such selected video
signal inputs, the monitor will show "no signal" warn-
ing message, and won’t check other video sources.
3) CEC Mode: When "On" is selected, users can turn on
or o the monitor by connecng to the device with
HDMI CEC funcon such as DVD player, camera, or PlayStaon game console.
8. Informaon: Show Frequency of the input image, On-Lap model name, rmware
version ...etc.
1) Reset: Select "Yes" to reset to defaults.
Chapter 4 Sengs of Extended Display
Secon 1 Sengs of Extended Display on
Windows 10
Click , then select [Sengs] →select [System]→
Select [Display]→Choose "Extend these displays" at
Mulple displays. Select "1920x1080" at Resoluon and
select "Landscape" at Orientaon for horizontal display.

9
Item On-Lap 1306H-ROn-Lap 1306E-R
Panel Wide screen 13.3-inch (16:9) Wide screen 13.3-inch (16:9)
True Resoluon 1920x1080 1920x1080
Color Depth 16.7M colors 262K Colors
Brightness 300 (cd/m²) (Typ.) 220 (cd/m²) (Typ.)
Contrast Rao 800:1(Typ.) 700:1(Typ.)
Viewing Angle 170°(H)/170°(V)(CR>10) 170°(H)/170°(V)(CR>10)
Response Time 12.5ms(Typ.) 12.5ms(Typ.)
Video Input HDMI*1, USB Type-C (DP 1.2)*1 HDMI*1, USB Type-C (DP 1.2)*1
Audio Output Earphone Jack (3.5mm mini jack)
(support analog2.5mmAUX)
Earphone Jack (3.5mm mini jack)
(support analog2.5mmAUX)
HDCP Support Yes Yes
HDCP CEC Support Yes Yes
Plug and Play VESA DDC2B/C1 VESA DDC2B/C1
Power Consumpon ≦8W ≦8W
Power Consumpon-
Standby Mode <0.5W <0.5W
Power Consumpon-
O Mode <0.5W <0.5W
Rated Voltage 5V 1.6A(Typ.) 5V 1.6A(Typ.)
Environment Condions Operaonal: 0~50℃ ;
Storage :-20~60℃
Operaonal: 0~50℃ ;
Storage :-20~60℃
Dimensions (W*H*D) 320mm*203mm*9mm (monitor)
325mm*214mm*15.4mm (monitor and cover)
Weight (typical) 710g (monitor)
975g (monitor and cover) 760g (monitor) 1025g (monitor and cover)
Cercaon
Chapter 5 Product Specicaon
Secon 1 General Specicaon
Secon 2 Supported Operang Modes
Resoluon Refresh Rate Horizontal Frequency (kHz) Vercal Frequency (Hz)
640x480 60Hz 31.469 59.940
720x480 60Hz 29.855 59.710
800x600 60Hz 37.879 60.317
R53848
RoHS
R53848
RoHS

10
Secon 3 Supported Video Modes
Supported Video Modes
1920x1080P (50Hz/59.94Hz/60Hz) 1280x720P (50Hz/59.94Hz/60Hz)
720x480P (59.94/60Hz) 640x480P (59.94/60Hz)
Resoluon Refresh Rate Horizontal Frequency (kHz) Vercal Frequency (Hz)
848x480 60Hz 31.02 60.000
960x600 60Hz 37.212 59.635
1024x768 60Hz 48.363 60.004
1152x864 60Hz 53.783 59.959
1280x600 60Hz 37.377 59.900
1280x720 60Hz 45.000 60.000
1280x768 60Hz 47.776 59.870
1280x800 60Hz 49.702 59.810
1280x960 60Hz 60.000 60.000
1280x1024 60Hz 63.981 60.020
1360x768 60Hz 47.712 60.015
1366x768 60Hz 47.712 59.790
1360x1024 60Hz 63.606 59.836
1400x1050 60Hz 65.317 59.978
1440x900 60Hz 55.935 59.887
1600x900 60Hz 55.990 59.946
1600x1024 60Hz 63.675 59.901
1680x1050 60Hz 65.290 59.954
1920x1080 60Hz 67.500 60.000

11
Chapter 6 Troubleshoong
Problem Soluons
1. When I connect On-Lap
monitor to the game console
or play videos, the monitor
only plays background music
but no human voice or part
of sound.
The earphone jack of On-Lap1306 supports dual channel
audio.
Please select 2 ch. audio output rather than 5.1 ch. in the
audio output sengs of the game console or DVD player.
2. No image displayed when
connecng to USB Type-C
port on PC or smartphone.
To display images on 1306, the USB Type-C port of PCs or
smartphones must support DisplayPort Alternate Mode
(USB Type-C (DP Alt)) output. Please inquire of the PC/
smartphone manufacturer about if your model supports
USB Type-C (DP Alt) mode and provides 5V 1.5A current
output.
3. The 1306 monitor con-
nected to my smartphone
via its USB Type-C port
ickers or restarts some-
mes.
Smartphone may not be able to provide stable 5V 1.5A
current to 1306, and cause the monitor to icker or fail to
be turned on due to insucient current.
Please refer to Secon 3 in Chapter 2, and use USB Type-C
Video and Independent Power Y-Cable(0.5m) (oponal
accessory) to connect to your smartphone and power bank.
4. When connecng
smartphone to the monitor
via its USB Type-C port, my
mobile game or app runs
slow.
This is a condion that may result from processor’s perfor-
mance or insucient RAM of the smartphone.
Please contact the phone manufacturer for further assis-
tance or answer.
5. The 1306, connected to
my computer by USB Type-C
port, works well at rst.
However, 1306 goes o and
on aer being used a while.
The display gets unsteady.
The baery of computer is running low so it decreases the
transmied current to the monitor. Due to the insucient
power, the monitor works unsteadily. Please connect the
power charger to the computer.
GeChic Corporation
11F-3, No. 138, Zhongming S. Rd.,
West Dist., Taichung, Taiwan
Customer Service ：[e-mail]
Rev. 2020/5/15

ご使用上の注意事項と警告および製品保証について
この表示に従わなかった場合、けがをする恐れや製品に物理的な破損が生じる可能性があ
ることを示します。
1.外出時には、必ずモニターに保護カバーを装着してパネル面を内側にして携帯してくださ
い。モニターが押されたり鋭利な物に接触しないようご注意ください。
2. USB または映像入出力ケーブルを挿入する前に、挿入方向が正しいかどうか確認して
ください。コネクタを抜く際は必ず USB ポートまたは映像入力ポートの方向に平行に引
き抜いてください。強い力でコネクタを揺らさないようにしてください。反対方向（上下逆向
き）に挿入したり、その他適切でない取扱いによって USB ポートや映像入力ポートが破
損した場合、保証期間中であっても無償修理サービスは適用されません。
3. On-Lap モニターの電源入力規格は 5V 2A DC 電流です。5V 以上の電流を流す
とモニターの故障を引き起こすおそれがあります。この故障は保証対象外となりますので
ご了承ください。PC のUSB ポート x2 か当社製 5V 2A AC アダプタに接続して電
源供給することをお薦めいたします。
4. On-Lap モニターや付属の保護カバーにはマグネットがついています。PC のハード
ディスクやその他磁気の影響を受けて破損するおそれのある物品に近づけないでくださ
い。PC が起動中またはスリープ状態にあるときは、保護カバーのマグネット部分には近づ
けないでください。
5. モニターのお手入れ時の注意事項：お手入れ前には、電源を抜き、やわらかい布でモニ
ターをやさしく拭きます。落としにくい汚れがある場合は、固く絞った布で拭き取ります。ベ
ンゼン、アルコール、シンナー、アンモニア、研磨剤を含む洗剤またはその他腐食性のある
洗剤や高圧洗浄機を使用しないでください。これらの使用により修理不可能な損害を受け
たり、表面に落ちない痕が残る可能性があります。
6. 製品が倒れたり、床に落ちることで重大な損傷につながる可能性がありますので、揺れ
るなど不安定な机、棚またはカートの上に置かないでください。また、動いている車内での
使用や持続的に振動している場所への設置も避けてください。
7. 耐水性ではありません。水に近い場所で使用しないようにしてください。
8. 本体ケースは分解しないでください。
9.オーディオの音量を上げ過ぎると、健康を損なう恐れがあります。オーディオジャックを使
用するまえにボリューム設定が適切か確認してください。
10.使いすぎると視力の低下につながるおそれがあります。30 分使用した後は 10 分間
の休憩を取ることをお勧めします。2歳未満の幼児にはモニターを見せないでください。2
歳以上の場合、一日のモニター使用が 1時間を超えないようにします。
IV

11.製品保証についての説明
取り扱い説明書をよくお読みいただき、説明書の操作と注意事項をしっかりと守ってください。
この説明書は大切に保管してください。
当社は、本製品にフリーズやエラーが発生しないことを保証しません。保証サービスは、保証
期間内および本製品の正常な使用状況下において発生した故障のみの対応となります。次
の原因により故障が発生した場合、保証サービスは対応できませんのでご了承ください。
(1)製品のバーコードが読み取れない場合。
(2)製品に改造、分解、変更がされていた場合。
(3)モニター表示とタッチパネルが正常でも外観に異常がある場合。自然劣化、摩耗、擦り
傷、色の変化など。
(4)入力電圧が 5V より高い、または電圧が不安定だったなど、外付け電源の問題により故
障が起きた場合。
(5)ケーブルを間違った方向に挿入または引き抜いたことでケーブルやモニターが損傷す
るなど、使用マニュアルにしたがって操作せずに損傷が生じた場合。
(6)ユーザーの故意、過失に係わらず、モニターに接触またはぶつかってモニターが倒れた
り落ちたりして損傷が生じた場合。
液晶ディスプレイの使用と画素について
モニター上に異なるパターンの画面が表示される場合、画面の明るさがわずかに不均等に
なることがあります。液晶ディスプレイの有効画素数は 99.99％以上ですが、表示の際に
0.01％またはそれ以下の画素が表示できないことがあります。当製品には高品質液晶パネ
ルを採用していますので、暗くなったり黒点や赤点が表示されることがありますが、製品の
通常の使用には影響はありません。
モニターの破損につながることがありますので、液晶モニターは長時間直射日光に当たら
ないようにしてください。
長時間同じ静止画面を表示すると、モニターに残像が残ることがありますが、数時間電源
を切ることで元に戻ります。
WEEE マークについて
当製品は適切な回収場所に委託してリサイクルを行い、家庭ごみと一緒にしないでく
ださい。
製品や付属品、説明書にこのマークがある場合、当該製品およびその他電子部品
（例：充電器、Rear Dock ケーブル）は家庭ごみと一緒に処分できません。廃
棄したい製品と付属品を指定の回収場所へ責任を持って委託し、廃棄電
子機器資源をリサイクルしてください。
設備の処理または廃棄に関するリサイクル情報については、お近くの代理
店、一般廃棄物処理センター、またはご購入いただいた店舗までお問い合
わせください。
EU 以外のリサイクル処理
EU 以外の場所で本製品やその付属品を処分される場合は、現地政府所定の法規
と廃品回収の規範にしたがってください。
こ の装 置は 、 クレ ス B機器です。この装置は、住 宅環境 で使用することを 目的と
して い ますが、この装 置がラ ジオやテレビジ ョン受信機に 近接して 使用さ れると、
受信障害を 引き起こすこと がありま す。
取扱説明書に従って 正しい 取り扱いをして下さい 。
VCCI-B
V

12
第一章 内容物の解説
その 1. 各部の説明
図 ： On-Lap 1306 保護カバー部位説明
図： On-Lap 1306 ボタンと LED ランプ説明
図： On-Lap 1306 接続説明