GeChic On-Lap M505E User manual

User Manual
On-Lap M505E/H Monitor

Noces, Cauons & Warranty Exclusions
LCD Pixel Statement
FCC Statement
CE Conformity & WEEE Symbol Informaon
—I
—II
—II
—III
Chapter 1 Parts of On Lap Monitor & Accessories —1
Secon 1 Parts Descripon —1
Secon 2 Accessories Descripon —2
Chapter 2 Installaon Instrucons —3
Secon 1 Setup of M505 Monitor & Use of Sleeve Bag —3
Secon 2 Connect to MacBook Pro/ Air, Other Laptops, and
Smartphone by USB Type-C Port —4
Secon 3 Descripon of M505H Proprietary Funcons —5
1. Charge the Smartphone or Computer —5
2. USB-A Port Descripon —6
3. Connect to Nintendo Switch® by the USB Type-C Port —6
Secon 4 Connect to PC by HDMI IN Port —6
Secon 5 Connect to Game Console & Set Up for 2-Player Games —7
Secon 6 Use of HDMI OUT Port —8
Secon 7 Connect to Headphone or Speaker —9
Secon 8 Installaon of VESA 100 Arm or Wall Mount —10
Chapter 3 Hot Keys, LED and OSD Menu Instrucons —10
Secon 1 Hot Keys & LED Indicaons —10
Secon 2 OSD Menu Descripon —11
Chapter 4 Display Seng of Extended Display —12
Secon 1 Sengs of Extended Display on Windows 10 —12
Secon 2 Sengs of Extended Display on Mac (OS X) —13
Chapter 5 Product Specicaon —13
Secon 1 General Specicaon —13
Secon 2 Supported Operang Modes —14
Secon 3 Supported Video Modes —15
Chapter 6 Troubleshoong —15
Table of Contents
English

—IV
—V
WEEE —V
—16
1. —16
2—17
—18
1. M505 —18
2. USB Type-C MacBook Pro/Air®
PC —19
3. M505H —20
1. PC —20
2. USB-A —21
3. USB Type-C Nintendo® Switch —21
4. HDMI IN PC —21
5. HDMI IN
—22
6. HDMI OUT —23
7 —24
8 VESA 100 —25
LED OSD —25
1 LED OSD —25
2 OSD —26
—28
1. - Windows 10 —28
2. - Mac (OS X) —28
—29
1. —29
2. —30
3. —30
—31
日
本
語

Noces, Cauons & Warranty Exclusions
Warning: The sign alerts you to potenal hazards that can hurt
you or damage the product.
1. When carrying On-Lap Monitor, please put it into the protecve sleeve.
Avoid hing the monitor violently and pung heavy objects on the
sleeve bag, these may cause the panel cracked.
2. When plugging in/out the cables, do make sure the force exerts in hori-
zontal direcon - do not shake the port or plug it in vercal direcon. Any
damage caused by wrong plug urging is not included in the warranty
coverage.
3. The power input specicaon for On-Lap monitor is 5V 2A DC current. If
the input voltage is more than 5V, the monitor will become damaged
seriously. and this will void the GeChic manufacturer's Warranty. We
suggest you to connect both connectors of the USB power cable to your
desktop΄s USB ports or use GeChic 5V-2A charger.
4. It is recommended to use the monitor in a well-venlated environment
at room temperature around 5℃ to 35℃ and humidity around 45% to
85%. The monitor should display connuously changing images rather
than displaying the same and a sll image for a long me. If you need to
use this monitor in an abnormal environment such as high temperature,
high humidity, conned space, low atmospheric pressure, etc., please
contact Gechic customer service center for further advice on usage envi-
ronment.
5. Cleaning On-Lap Monitor
Unplug the power input before cleaning. Please use so cloth to clean
touch screen. For stubborn stains, please use lightly-dampened cloth to
wipe again. Do not use benzene, alcohol, thinner, ammonia, abrasive
cleaners, compressed air or other corrosive solvents. These solvents may
cause permanent damage on the screen or leave non-removable stain.
6. Do not expose the LCD panel to sunlight.
7. Please do not use the monitor on a lasng shaky or unstable surface. Do
not use the On-Lap Monitor on a moving vehicle.
8. The product is not waterproof. Do not use this product in or near water.
9. Do not insert any object into the Product΄s slots or gaps. Do not disas-
semble the monitor in any way.
10.High Volume Warning: High volume can lead to lasng damage to your
hearing. Please check the volume sengs before reproducing any sound.
11.Overuse of the monitor may result in vision damage. For every 30
minutes with the monitor, give your eyes 10 minutes break. Avoid chil-
dren under age 2 to watch with the monitor; prevent children over age 2
from watching with the monitor over 1 hour per day.
12.Exclusions from Warranty Service
Please read the warranty terms below carefully, and follow the usage
guide and precauonary notes. Please keep this manual for future refer-
ence. GeChic does not warrant uninterrupted or error-free operaon of
this Product. The warranty only covers failure /malfuncon under normal
use condions during warranty period. The warranty does not apply to
the following condions:
I

LCD Pixel Statement
(1)The bar code has been removed or worn down, and cannot be idened.
(2)This product has been modied, disassembled, or reed.
(3)Display and touch funcon working normally; only variaon in appearance
(i.e., ageing, arion, scratch, color changing and etc.).
(4)Any breakdown caused by power supply. (i.e., inpung power over 5V or
unsteady current)
(5)Any damage caused by disoperaon or failure to follow this manual. (i.e., Plug
or unplug the cable in wrong direcon and causing damage on cable or moni-
tor.)
(6)Any damage caused by hing or cracking monitor accidentally or
purposely, or collapsing or overturning monitor.
II
There is slightly uneven brightness on the screen when displaying dierent
screen paern. The LCD screen has 99.99% or more eecve pixels. 0.01% of
pixels or less may not light or may light incorrectly. The On-Lap monitor uses
a high quality LCD panel. Nevertheless, pixels on the LCD screen may not light
or appear as red or black dots. All the above are normal with the LCD monitor
and will not aect the normal usage of the product.
Avoid placing the monitor against sun-light, or it may damage the monitor.
An aerimage of the previous screen may remain, when the same image is
displayed for hours. In this case, the screen is recovered slowly by turning o
the power for a few hours.
Noce: This equipment has been tested and found to comply with the limits
for a class B digital device, pursuant to part 15B of the FCC Rules. These limits
are designed to provide reasonable protecon against harmful interference
in a residenal installaon.
If this equipment does cause harmful interference to radio or television re-
cepon, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
■Reorient or relocate the receiving antenna.
■Increase the separaon between the equipment and receiver.
■Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
■Consult the dealer or an experienced radio/TV technician for help.
Cauon:
1. Changes or modicaons not expressly approved by GeChic Corp. could
void the user's authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order
to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modicaon to this equipment. It is the responsi-
bilies of the user to correct such interference.
Federal Communicaons Commission (FCC)
Class B Statement

CE Declaraon of Conformity
This product complies with the following standards:
■EN 55032:2015/AC:2016 Class B(Radio Disturbance requirement of Infor-
maon Technology Equipment).
■EN55024:2010+A1:2015(Immunity requirement of Informaon Technolo-
gy Equipment).
■EN 61000-3-2:2014 (Harmonic current emissions).
■EN 61000-3-3:2013 (Voltage uctuaons & icker) following provisions of
direcves applicable.
■AS/NZS CISPR 32: 2015
■2014/30/EU (EMC Direcve).
III
WEEE Symbol Informaon
This symbol on the product, accessories or literature indicates
that this product and its electronic accessories (e.g., adapter,
cables, and Rear Dock) must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of
these items by handing it over to a designated collecon point for
the recycling of waste electrical and electronic equipment.
For more informaon about where you can drop o your waste equipment
for recycling, please contact your local city oce, your household waste
disposal service or the shop where you purchased the product.
For Disposal in Countries Outside of the European Union
If you wish to discard this product and its accessories in other area and coun-
tries, please contact your local government for applicable laws and regula-
ons governing the disposal of this product.

1
Chapter 1 Parts of On-Lap Product & Accessories
Secon 1 Parts Descripon

2
Secon 2 Accessories Descripon
Standard Accessories M505E M505H
HDMI-A Video Cable(1.2m) ○○
USB Type-C Video Cable(1m) ○○
USB-C(female) to USB-A(male) Adapter ○○
65W PD Power Adapter & Power Cord
- ○
5V 2A Power Adapter ○-
15-inch Sleeve Bag
○○
Oponal Accessories Descripon
M505 VESA 100 Aluminum Alloy
Bracket Screw M505 monitor to VESA 100 arm or wall
mount by the 4 VESA 100 screw holes on the brack-
et. Refer to Chapter 2> Secon 8
USB-A to USB-C Power and
Touch Signal Cable (1.2m/ 2.1m) One plug is USB-A(male) for USB port of a PC,
power adapter, or power bank; the other plug is
USB-C(male) for connecng to M505 monitor.
HDMI-A to Micro-HDMI Video
Cable (2.1m) One plug is micro HDMI(male) for connecng to
camera/ computer; the other plug is HDMI-A(male)
for connecng to M505 monitor.
HDMI-A to mini-HDMI Video
Cable (2.1m) One plug is mini-HDMI (male) for connecng to
camera; the other plug is HDMI-A(male) for con-
necng to M505 monitor.

3
Chapter 2 Installaon Instrucons
Secon 1 Setup of M505 Monitor & Use of Sleeve Bag
1. Set up M505 Monitor and Adjust the Angle
In the Fig. shown, erect the monitor on the desk. Hold the display by one hand and
hold the pull of the I/O base to pull down the I/O base by the other hand. When the
base is placed on the desk flat, adjust the screen angle between 40° and 85°.
Do not setup the monitor more than 90°. When angle is more than 90°, the monitor
will overturn forward, causing the panel crack. When the display angle is less than 40°
degrees, the monitor may fall slowly to 0°.
Warning: The rotation range of the hinge is between 0° to 170°. Please do not
rotate it more than 170°, otherwise the monitor may be damaged or cracked.
2. Noces of Vercal Display
(1) In the Fig. shown, place the monitor with buon side
upward and pull the I/O base out to a 90° angle with the
display. Please place the monitor on a at desk. Do not touch
or shake the monitor, or the screen may be cracked from
overturning.
When using vercal display for long me, please adopt M505
VESA 100 Aluminum Alloy Bracket (oponal) and VESA arm
for safety. Please refer to Secon 8.
(2) The monitor doesn't support automac rotaon. Please
refer to Chapter 4 and select " Portrait (ipped) " of
"Orientaon".

4
Secon 2 Connect to MacBook Pro/Air, Laptop or Smartphone by USB
Type-C Port
The computer, smartphone, etc. for USB Type-C connecon must meet the following
condions:
■Supports DisplayPort Alternate Mode (USB Type-C (DP Alt Mode))
■Supplies at least 5V 2A power current. If Smartphone or the devices can't supply 5V
2A current to the monitor, please power the monitor by the adapter.
1. Power the Monitor by a Computer
In the Fig. shown, insert USB Type C Video Cable (1.0m)
into the USB Type-C ports on M505 and the computer.
The computer will output current and video
signals via its USB Type-C port, therefore,
there is no more adapter or HDMI cable
required.
2. Power M505E Monitor by the 5V 2A Adapter
Please follow the steps below for connecon.
○
1 Use 5V 2A Power Adapter and USB-A to USB-C Power Cable (1.2m)(Oponal) to con-
nect to DC IN port on M505E. (For M505H, please refer to Secon 3 to connect the 65W PD
Power Adapter. )
○
2 Aer turning on the smartphone or computer, connect M505 to computer/smartphone by
USB Type-C Video Cable(1.0m).
Cauon: Do NOT connect to DC IN port.
Warning: When the monitor is in the sleeve bag,
please do not put any heavy objects upon the sleeve
bag and avoid any collisions, or the monitor may be
cracked.
3. Instructions of Sleeve Bag
In the Fig. shown, open the sleeve bag by one hand,
hold the screen bezel (don't touch the panel part) by
the other hand and put the monitor into the sleeve
bag.

5
Secon 3 Descripon of M505H Proprietary Funcons
1. Charge the Smartphone or Computer
○
1 Connect the 65W PD Power Adapter to the DC IN port on M505H.
○
2 Aer turning on the smartphone or computer, connect M505H to the smartphone/
computer by USB Type-C Video Cable (1.0m). Upon a successful connecon, the moni-
tor displays the image from
smartphone/computer and charge
smartphone/computer simultaneously.
Noce
1. The monitor can't charge the smartphone.
2. When the smartphone displays content in portrait, the mirrored image displays in
the center part of the monitor. The full-screen display only shows when rotang the
smartphone screen to landscape.
○
3 In OSD menu, select “No” for “Charge from NB/PC" in
“Input Source”. Then the smartphone or computer won't
power to M505. (Aer reboong the monitor, the seng
will be reset to “Yes”. You need to enter the OSD
page to set again.)
Noce: The maximum power output of the monitor is 20V 2.25A. If the USB PD
power requirement of the computer is greater than 45W, a fail connecon between
the monitor and the computer may be caused by the insucient power. If so, please
turn o the monitor, unplug the 65W PD power adapter and USB-C Video Cable.
Refer to Chapter 2 > Secon 2 > Item 1, power the monitor by the computer.
③

6
3. Connect to Nintendo Switch® by USB Type-C
In the Fig. shown, ○
1insert the 65W PD Power Adapter into the DC IN port on M505H.
○
2Turn on the Switch® console rst, and then use USB Type-C Video Cable(1.0m)
to connect the monitor to Switch® console. Upon a successful connecon, the moni-
tor displays image from Switch® and charge the Switch console simultaneously.
Noce 1: To use Joy-Con while Switch console outputs video signals to the monitor,
please detach Joy-Con controllers from Nintendo Switch® console.
Noce2: Aer nishing the games, please unplug the USB Type-C video cable and turn
o Switch® console. Otherwise, the baery power of Switch will run out gradually. Since
the power supply is interrupted, the Switch® console will boot automacally and run out
all the baery power by me.
Noce 3: When Switch runs out of power, it cannot be connected to the monitor.
Please insert the 65W PD Power Adapter into Switch® console to charge it for 10 mins and
then connect to monitor following the steps above.
Secon 4 Connect to Computer by the HDMI IN Port
○
1 Connect to USB port on a PC to power the monitor.
(A)Use the USB-C Port of PC
In the Fig. shown, insert USB Type-C Video Cable (1.0m) into the USB-C port on
the computer and the USB-C port on M505E.
(B)Use the USB-A Port of PC
In the Fig. shown, convert one end of USB Type-C Video Cable(1m) to USB-C
(Female) to USB-A(Male) adapter and then connect to the USB-A port on the PC.
○
2 Use HDMI-A Video Cable(1.2m) to connect the computer to the HDMI IN port on
the monitor.
2. USB-A Port Descripon
Connect 65W PD Power Adapter to the DC IN port on the monitor. Insert USB Type-C
Video Cable(1.0m) into the USB Type-C ports (DP Alt) on the monitor and computer.
And then, connect a mouse or keyboard to the USB-A port on M505H monitor, the
signal will be transmied to the computer or smartphone through the monitor.
The maximum power output of the USB-A port of the monitor is 5V 500mA. Please do
not charge the devices with power requirement more than 500mA via the USB-A port.

Cauon: Please DO NOT connect to HDMI OUT port.
7
Secon 5 Connect to Game Console & Set Up for 2-Player Games
You may duplicate the game image on two monitors for two players by the HDMI OUT
port on M505. Two players don’t need to sit side by side, you can sit face to face and
watch own screens to enjoy an exclusive gaming space.
In the Fig. shown, rstly, connect 5V 2A Power Adapter to the monitors individually.
Use one HDMI-A Video Cable (1.2m) to connect the game console and the HDMI IN
port on Monitor○
1.
And then use the other HDMI-A Video Cable (1.2m) to connect the HDMI OUT port on
Monitor○
1 and HDMI IN port on Monitor○ 2.
○
3 If the USB port of the computer cannot output sucient power, please refer to
Secon 2 to connect 5V 2A power Adapter to the DC IN port on the M505E. (For
M505H, please refer to Secon 3 to connect the 65W PD Power Adapter. )
Noce: It is unable
to extend the
screens or split
the gaming image
to two monitors,
each displaying
half. The two
monitors can only
display the same
image.
Powered by USB-C port
of the PC
Powered by USB-A port
of the PC

2. Connecon of Mulple Monitors or Video Conference Room
Please follow the steps below for connecon.
○
1 Use HDMI-A Video Cable to connect computer to the HDMI IN port on Monitor○ 1.
○
2 Use HDMI-A Video Cable to the HDMI OUT port on Monitor○ 1 and HDMI IN port on
Monitor○
2. By analogy, up to 14 monitors can be daisy-chained.
○
3 Connect USB power cables to adapters and plug the adapter into the power exten-
sion socket. As soon as power is on, the monitors turn on automacally.
Press OSD buons to enter OSD menu and select “O” for “Auto Power O". Hereby,
the monitor won’t turn o automacally when no video signal input.
8
Secon 6 Use the HDMI OUT Port
1. Connect to Projector or Digital Whiteboard
It is able to synchronize the display of M505 with the projector by the HDMI OUT port
on M505 monitor. The speaker watches M505 monitor and the audience watches the
projector screen.
Please follow the steps below for connecon.
○
1 Connect the power cable to 5V 2A Adapter and the DC IN port of M505.
○
2 Use HDMI-A Video Cable(1.2m) to connect a computer and the HDMI IN port on the
monitor.
○
3 Use the second HDMI-A Video Cable(Oponal) to connect the HDMI OUT port on
the monitor and HDMI IN port on a projector/ digital whiteboard.
Noce 1: As the image is input by HDMI IN port, the HDMI OUT port can output the
same image. The HDMI OUT port can't output the image from USB Type-C port.
Noce 2: While using HDMI OUT ports to connect mulple monitors, all the moni-
tors are able to display the same image only, not dierent images.

3. Connect to Live Broadcaster
Please follow the steps below for connecon.
○
1 Use HDMI-A to mini-HDMI Video Cable(Oponal) to connect a camera or video
recorder to the HDMI IN port on M505 monitor.
○
2 Use HDMI-A Video Cable(1.2m) to connect live broadcaster to the HDMI OUT port
on M505 monitor.
○
3 Connect the live broadcaster and smartphone.
○
4 Connnect one end of USB Type-C Video Cable(1m) to USB-C(Female) to USB-A
(Male) adapter and then connect to the 5V 2A Power Adapter to power the monitor.
Secon 7 Connect to Headphone or Speaker
In the Fig. shown below, connect a headphone or external speakers to the headphone
jack on the monitor.
Noce: Headphone out port supports 2-channel audio output. DO NOT plug in
microphone's audio input cable(audio in). If the sound format of PC or game console
is 5 or 7 channels, it may cause the headphones not be able to output all sounds (for
example, the vocals disappear in the game). Please select 2-channel audio output in
sound sengs of PC or game console.
9
4

10
Secon 8 Installaon of VESA 100 Arm or Wall Mount
Please follow the steps below for setup.
○
1 Screw the M505 VESA 100 bracket (Oponal) to the I/O base of
the monitor by 4 M4 screws.
○
2 Clip the monitor screen and VESA 100 aluminum alloy bracket
together by the two clips to prevent the screen from falling down.
○
3 Screw M505 VESA 100 bracket to a monitor arm or wall mount
by 4 M4 screws.
Chapter 3 Hot Keys, LED and OSD Menu Instrucons
Secon 1 Hot Keys & LED Indicaons
Do not press any two shortcut keys at the same me, otherwise the buons may not
respond or react incorrectly.
1. LED Light Descripon
LED Light: It shows green light when turning on On-Lap Monitor and shows red light
when stand by. There is no light when the monitor is o.
2. Hot Keys Descripon

Secon 2 OSD Menu Descripon
When turning on monitor at the rst me, the "Language
Select" menu appears on the right top. Please press "
Menu/Select " buon to choose a language, then the
"Language Select" menu won't appear next me.
1. Display Sengs
In the Fig. shown, enter "Display Sengs" to adjust
"Brightness", "Contrast", "Sharpness", etc.
1) ECO Mode: The maximum brightness is at 50 in ECO
Mode.
2) Auto Adjust: Launch "Auto Contrast Adjust" and
"Auto Brightness Adjust" to adjust brightness and
contrast automacally to ensure the highest quality
when displaying moving images.
2. Color Sengs
1) Color Eect: If the PC image output format is RGB
Limited, it is recommended to select "Standard 1"; if
it is RGB Full format, it is recommended to select
"Standard 2". Select "Phone" mode to make the
colors more vivid; select "Movie" mode to display
the dark scene more clearly.
2) Blue Light Reducon: Select "On" to reduces the
screen's blue light automacally.
3) Color Temperature: Select "Cool" to increase the
blue color of the image; Select "Warm" to increase
the red color of the image. Select "User" to adjust
the RGB color sengs manually.
3. Aspect Rao
1) Aspect rao: When select "16:9 Full Screen", the
monitor displays a 16:9 image in full screen. When select 4:3, the monitor displays
a 4:3 image with le-right side black borders to ll the 16:9 screen. When select
"Original", the monitor displays the image in its original size.
Power Press Power Buon to power on/o the Monitor.
Input Source/Exit Press this buon to show "Input Source" and then press to
switch the input sources. When using the OSD menu, press this
buon to return to previous page.
Menu/Select Press this buon to launch OSD panel. In OSD panel, press this
buon to select and enter the next page.
Increase Volume/
Next
Press this buon to show "Volume bar". Press and hold this buon
to increase the volume connuously. In the OSD menu, press this
buon to move down or to the right.
Decrease Volume/
Previous
Press this buon to show "Volume bar". Press and hold this
buon to decrease the volume connuously. In the OSD menu,
press this buon to move up or to the le.
+ Reset Press both "Exit" and "Decrease Volume/Down" at the same me
and OSD will be reset as the factory sengs.
+ Mute Press both " Increase Volume/Up" and "Decrease Volume/Down"
at the same me to enable "Mute" mode. Press these two buons
11

2) Overscan: only available when HDMI video signal input(ex:1080P/720P). Enabling
this funcon allows you to calibrate the display area.
4. OSD Menu
1) Language Select: Change to the other language.
2) H. Posion: Move the OSD menu le/right.
3) V. Posion: Move the OSD menu up/down
4) OSD Timer (sec): Adjust the idle me before OSD
menu disappears.
5) OSD Transparency: Make the OSD menu transpar-
ent to show the background.
6) Auto Power O: Select "On" to launch this funcon,
when no image displayed on the screen, the moni-
tor will enter Standby mode, and power o itself
aer 2 minutes.Select "O" to disable this funcon. The monitor will stay in
standby mode and will not power o.
7) Power On/O Indicator: Select "O" to turn o the Power On/O Indicator.
8) Power Buon Lock: Select "On" to lock the Power Buon.
5. Audio
Adjust the audio volume or select silent mode.
6. Input Source
1) Input Source: Select HDMI or USB type-C for the
video signal input.
2) Auto Search: When "On" is selected, the monitor
will detect two video input sources in sequence,
and the monitor will display the rst one read.
When "O" is selected, only the video source select-
ed in Input Source will be displayed. If no such
selected video signal inputs, the monitor will show
"No signal" warning message, and won’t detect
other video sources.
3) Charge from NB/PC: Select "Yes", the computer/
smartphone will charge the monitor. Select "No",
this power input will be closed. Aer reboong the
monitor, the seng will be reset to "Yes" automa-
cally. (This menu funcon is disable while M505H
monitor is connected with the 65W PD adapter.)
4) CEC Mode: When "On" is selected, users can turn
on/ turn o the monitor by connecng to a device
with HDMI CEC funcon such as DVD player, cam-
era, or PlayStaon game console.
7. Informaon
Show Frequency of the input image, On-Lap model name,
rmware version, etc.
1) Reset: Select "Yes" to reset to defaults.
Chapter 4 Sengs of Extended Display
Secon 1 Sengs of Extended Display on
Windows 10
Click , select [Sengs] →[System]→ [Display], and
choose "Extend these displays" at Mulple displays.
Select "1920x1080" at Resoluon and select
"Landscape" at Orientaon for horizontal display. Select
"Portrait (Flipped)" for vercal display.
12

Secon 2 Sengs of Extended Display on Mac (OS X)
Click , select [System Preference]→
[Arrangement] tab, and uncheck [Mirror
Displays]. Select one of the blue rectangles,
and drag to the desired posion. First, click
[Display] tab and select resoluon of the
laptop, and then click "Gather Windows",
and select resoluon to "1080p" for On-Lap
M505. For vercal display, select 270ﾟat
"Rotaon"
13
Item On-Lap M505E On-Lap M505H
Panel Wide screen 15.6-inch (16:9)
True Resoluon 1920x1080
Color Depth 16.7M Colors 16.7M Colors
Brightness 250 (cd/m²) (Typ.) 300 (cd/m²) (Typ.)
Contrast Rao 700:1(Typ.)
Viewing Angle 170°(H)/170°(V)(CR>10)
Response Time 15ms(Typ.)
Video Input HDMI-A*1, USB Type-C(DP 1.2)*1
Video Output
HDMI-A*1 (HDMI Loop: up to 14 monitors) The num-
ber of monitor loop depends on dierent HDMI cable,
HDMI video signal and other variable factors.
The actual units of the monitor loop may more or less
than 14 pcs.
USB Output No USB-A*1
Audio Output Earphone Jack (3.5mm mini jack)
(support analog 2.5mmAUX)
Chapter 5 Product Specicaon
Secon 1 General Specicaon

Resoluon Refresh Rate Horizontal Frequency (kHz) Vercal Frequency (Hz)
640x480 60Hz 31.469 59.940
720x480 60Hz 29.855 59.710
800x600 60Hz 37.879 60.317
848x480 60Hz 31.02 60.000
960x600 60Hz 37.212 59.635
1024x768 60Hz 48.363 60.004
1152x864 60Hz 53.783 59.959
1280x600 60Hz 37.377 59.900
1280x720 50Hz 37.500 50.000
1280x720 60Hz 45.000 60.000
60Hz 44.772 59.855
1280x768 60Hz 47.776 59.870
1280x800 60Hz 49.702 59.810
1280x960 60Hz 60.000 60.000
1280x1024 60Hz 63.981 60.020
1360x768 60Hz 47.712 60.015
1366x768 60Hz 47.712 59.790
1360x1024 60Hz 63.606 59.836
1400x1050 60Hz 65.317 59.978
1440x900 60Hz 55.935 59.887
1600x900 60Hz 55.990 59.946
1600x1024 60Hz 63.675 59.901
1680x1050 60Hz 65.290 59.954
1920x1080 50Hz 56.250 50.000
1920x1080 60Hz 67.500 60.000
60Hz 66.587 59.934
Secon 2 Supported Operang Modes
14
R53848
RoHS
Item On-Lap M505E On-Lap M505H
USB-C Power Delivery Support No
HDCP Support Yes
HDCP CEC Support Yes
Power Consumpon ≦10W
Power Consumpon- Standby Mode <0.5W
Power Consumpon- O Mode <0.5W
Rated Voltage 5V 2.0A(Typ.)
Environment Condions Operaon: 0~50℃; Storage :-20~60℃
Dimensions (W*H*D) Display top cover: 364mm*250mm*6.9mm
IO Base: 364mm*135mm*10.7mm
Weight (typical) 1168g 1148g
Cercaon