Genesis GDP500 User manual

8” 5-Speed Drill Press
Perceuse à colonne 5 vitesses de 8 po
Taladro de pie de 8” y 5 velocidades
Operator's Manual
Manuel d’utilisation
Manual del Operario
GDP500

English
8” 5-Speed Drill Press
Operator’s Manual GDP500
8" 5-Speed Drill Press 2.5 AMP
Operator’s Manual
Specifications:
   
   
  
  
  
   
   
   
  
  
  

WARNING:To reduce the risk of injury, user must read and understand
this operator’s manual before operating this tool. Save this Manual for future
reference.
Toll-Free Help Line: 1-888-552-8665
WARNING:






Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
GENERAL SAFETY RULES
 WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects
or other reproductive harm. Some examples of these chemicals are:
 
 
 
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.





3
English
 WARNING:READ AND UNDERSTAND ALL WARNINGS, CAUTIONS
AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure
to follow all instructions listed below may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY:
 Keep your work area clean and well lit

 Do not operate power tools in explosive atmospheres


 Keep bystanders, children, and visitors away while operating a power
tool.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. 






•Donotexposepowertoolstorainorwetconditions.

•Avoidbodycontactwithearthedorgroundedsurfacessuchaspipes,
radiators, ranges and refrigerators. 

•Donotabusethecord.


•Whenoperatingapowertooloutside,useanextensioncordsuitable
for outdoor use. 
•DonotuseAConlyratedtoolswithaDCpowersupply.


PERSONAL SAFETY
• Stay alert, 


•Usesafetyequipment.


•Dressproperly.



English
8” 5-Speed Drill Press
Operator’s Manual GDP500
•Avoidaccidentalstarting.


•Removeanyadjustingkeysorwrenchesbeforeturningthepower
tool on. 

•Donotoverreach.
.
•Ifdevicesareprovidedforconnectionofdustextractionand
collection facilities, ensure these are connected and properly used.

•Donotusealadderorunstablesupport.

•Keeptoolhandlesdry,cleanandfreefromoilandgrease.

TOOL USE AND CARE
• Secure the work piece. 


•Donotforcethepowertool.


•Usethecorrectpowertoolforthejob.

•Donotuseatooliftheswitchdoesnotturnitonoroff.

.
•Turnthepowertooloff,anddisconnecttheplug

. 
.
•Storeidletooloutofreachofchildrenandotherinexperienced
persons. 
•Maintainpowertoolswithcare.



•Userecommendedaccessories.



•Keepcuttingtoolssharpandclean.
.

5
English
•Feedtheworkpieceinthecorrectdirectionandspeed.



•Neverleavethetoolrunningunattended,turnthepoweroff.

•Neverstartthepowertoolwhenanyrotatingcomponentisin
contact with the work piece.
SERVICE
 Have Your Power Tool Serviced by a qualified repair person using
only identical replacement parts. 

•ServiceYourPowerToolperiodically.

WARNING:
READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING
INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
personal injury.
EXTENSION CORDS
Grounded tools require a three wire extension cord.









Guidelines for Using Extension Cords
 

 

 
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Amperes
(At Full Load)
Extension Cord Length
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet
0–2.0      
2.1–3.4      
3.5–5.0      
5.1–7.0      
7.1–12.0      
12.1–16.0      
16.1–20.0      

English
8” 5-Speed Drill Press
Operator’s Manual GDP500
SPECIFIC SAFETY RULES FOR DRILL PRESSES
 WARNING:DO NOT LET COMFORT OR FAMILIARITY WITH PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT
SAFETY RULES. If you use this tool unsafe or incorrectly, you can suffer serious
personal injury!
•Makesurethedrillpressisonarm,levelsurfaceandproperly
secured 

 Unplug the drill press before making adjustments, repairs,
maintenance or storing.
•Alwaysswitchoffthedrillpressbeforeunpluggingit

•Userecommendedspeedsfordrillaccessoriesandworkpiece
material.
•Allowthemotortocomeuptofullspeed

•Weareyeprotection.Donotweargloves,necktie,orlooseclothing.
•Beforestartingtheoperation
.
•Keephandsawayfromworkarea.Keephandsawayfromthebit.
•Besuredrillbitorcuttingtoolissecurelylockedinthechuck.
•Alwaysclampworkpieceorbraceagainstcolumntoprevent
rotation. 
•Makesurethepulleyhousingcoverisdownandthechuckis
installed properly before engaging the power switch.
•Keepbitscleanandsharp.
•Locktheswitchoffwhenleavingthedrillpress.
•Beforestarting,besurechuckkeyisremovedfromthechuckand
the motor head and table are locked.
•Neverstartthedrillpress

•Adjustthetableordepthstoptoavoiddrillingintothetable.
•Whenusingadrillpressvise,alwaysfastenthevisetothetable.
•Donotoperateinrainorindamplocations.
•Groundingrequired.
SAVE THESE INSTRUCTIONS



















7
English
YOUR 8" DRILL PRESS

FIG 1
16
15
17
13
1
1214
6
8
10
11
7
4
3
1
9
18
5
2

English
8” 5-Speed Drill Press
Operator’s Manual GDP500
UNPACKING AND CONTENT
IMPORTANT:Due to modern mass production techniques, it is
unlikely the tool is faulty or that a part is missing. If you find anything
wrong, do not operate the tool until the parts have been replaced or the
fault has been rectified. Failure to do so could result in serious personal
injury.
Contents in Package: (FIG 2)
Item Description QTY
    
  
   
   
    
   
    
   
   

WARNING: If any parts are missing or damaged, do not attempt to
assemble the saw, plug in power cord or turn the switch on until the missing or
damaged parts are replaced.
FIG 2
A
B
C
DE
F
GHI

9
English
ASSEMBLY
WARNING: Always be sure that the tool is switched off and unplugged
from the power source before adjusting, adding accessories, or checking a
function on the tool .
Attaching Column To Base (FIG 3)







Installing the Table Assembly (FIG 4)





Installing Chuck, Head Assembly and
Feed Handles (FIG 5)
















Mounting the Drill Press







FIG 3
3
FIG 4
FIG 5
1
2
5
4
2
7
6
2
8
9
5
10

English
8” 5-Speed Drill Press
Operator’s Manual GDP500
ADJUSTMENTS
WARNING: Always be sure that the tool
is switched off and unplugged from the power
source before adjusting, adding accessories, or
checking a function on the tool
.
Adjusting Speeds and Belt Tension (FIG 6, 7)













Adjusting Table Height (FIG 8)



Adjusting Table Bevel (FIG 8)








Setting Drill Depth (FIG 9)












SPINDLE SPEED(R.P.M)
1 760
2
3
4
5
1150
1630
2180
3070
FIG 7
FIG 9
1
2
3
4
5
6
FIG 8
1
4
5
2
3
FIG 6
1
4 6 5
32
1

11
English
Squaring the Table to the Head (FIG 10)










Adjusting the play of Spindle (FIG 11)
NOTE: 










OPERATION
ON/OFF Switch (FIG 12)






Rotating the table (FIG 8- Page 10)




FIG 10
1
4
3
2
FIG 12
2
1
FIG 11
2
1

English
8” 5-Speed Drill Press
Operator’s Manual GDP500
Installing or Removing Bits (FIG 13)
WARNING: To reduce the risk of injury, only use the chuck key provided
with this drill press or a duplicate of it. This chuck key is self-ejecting and will
“pop” out of the chuck when you let go. This action is designed to help prevent
throwing of the chuck key from the chuck when power is turned “ON”. Do not
use any other key as a substitute; order a new one if damaged or lost.
To install a drill bit (FIG 13)











To remove the bit
WARNING: Make sure the chuck key is removed from the chuck before
starting any drilling operation.
Application
You may use this drill press for the following applications:



WARNING: Read and understand the following items about your drill
press before attempting to use it.
Position the Table and Work Piece






WARNING: Always make sure the work piece is not in contact with the
bit before operating the switch to start the tool. Failure to reed this warning
may cause the work piece to be kicked back toward the operator and result in
serious personal injury.
WARNING: Make sure the chuck key is removed from the chuck before
starting any drilling operation.
WARNING: Always make sure the work piece is secured to the table by
clamps or other clamping devices.
FIG 13
2
431

13
English
General Drilling Instructions






Refer to FIG 14.







WARNING: Make sure the chuck key is removed from the chuck before
starting any drilling operation.
Drilling Tips








RECOMMENDEDSPEEDFORDRILLSIZE&MATERIAL
VITESSERECOMMANDEÉPOURLATAILLEDEFORETETLEMATÉRIAU
VELOCIDADRECOMENDADAPARAELTAMAÑODELABROCAYELMATERIAL
SPEED(RPM) WOOD ALU/ZINC/BRASS IRON/STEEL
VITESSE(TR/MM) BORIS ALU/ZINC/LAITON FER/ACIER
VELOCIDAD(RPM) MADERA ALU/ZINC/BRONCE HIERRO/ACERO
3070 3/8"(10mm) 7/32"(5.6mm) 3/32"(2.4mm)
2180 5/8"(16mm) 11/32"(8.7mm) 5/32"(4.0mm)
1630 7/8"(22mm) 15/32"(12mm) 1/4"(6.4mm)
1150 1‐1/4"(32.75mm) 11/16"(17.5mm) 3/8"(10mm)
760 1‐5/8"(41mm) 3/4"(19mm) 1/2"(12.5mm)
FIG 14

English
8” 5-Speed Drill Press
Operator’s Manual GDP500
MAINTENANCE
CLEANING



WARNING: Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc, come in contact with plastic parts.
Chemicals can damage, weaken or destroy plastic which may result in serious
personal injury.





LUBRICATION



15
English
TWO-YEAR WARRANTY




THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL
PURPOSES. ACCESSORIES INCLUDED ARE NOT COVERED BY THE 2 YEAR WARRANTY.
TOLL-FREE HELP LINE

888-552-8665
www.richpowerinc.com

Français
Perceuse à colonne 5 vitesses de 8 po
Manuel d’utilisation GDP500
PERCEUSE À COLONNE 5 VITESSES DE 8 PO 2,5A
Manuel d’utilisation
Spécifications:












AVERTISSEMENT: Pour réduire le risque de blessure, l’utilisateur
doit lire et assimiler ce manuel d’utilisation avant de se servir de l’outil.
Conservez ce manuel comme référence ultérieure.
Numéro d’aide sans frais: 1-888-552-8665.
AVERTISSEMENT: 






Repérez ce symbole qui signale d’importantes
précautions de sécurité. Cela veut dire faites
attention ! Votre sécurité est en jeu.
RÈGLES GÉNÉRALES DE SÉCURITÉ
AVERTISSEMENT: Certaines poussières produites par des appareils
électriques de ponçage, sciage, meulage, perçage et autres travaux de
construction contiennent des produits chimiques connus pour causer cancer,
anomalies congénitales et autres atteintes à la reproduction. Voici quelques
exemples de ces produits nocifs :
 
 
 
Votre risque en cas d’exposition varie, selon la fréquence d’exécution de ce type
de tâches. Pour réduire votre exposition à ces produits : travaillez dans une zone
bien ventilée en portant un équipement de sécurité approuvé, tel que masque à
poussières spécialement conçu pour filtrer les particules microscopiques.

É



17
Français
AVERTISSEMENT:LISEZ ET ASSIMILEZ TOUS LES AVERTISSEMENTS,
MISES EN GARDE ET INSTRUCTIONS D’UTILISATION AVANT DE VOUS SERVIR
DE CET ÉQUIPEMENT. Sinon vous risquez commotion électrique, début
d’incendie et/ou blessures corporelles.
CONSERVEZ CES INSTRUCTIONS
LIEU DE TRAVAIL:
• Gardez propre la zone de travail. 

•Nepasutiliserd’outilsélectriquesdansdesatmosphères
explosives, 

•Garderlesbadauds,enfantsetvisiteursàl’écartpendant
l’utilisation d’un outil électrique. 

SÉCURITÉ ÉLECTRIQUE
• La puissance des bouchons outil doit correspondre à la prise
électrique. 







•NEPASexposerlesoutilsélectriquesàlapluieoul’humidité.

•Évitertoutcontactducorpsavecdessurfacesmisesàlaterre,


•NEPASmaltraiterlecordond’alimentation.




•Lorsquel'exploitationd'unpouvoirendehorsdesoutils,


•NEPASutiliserl'ACnotéeslesoutilsd'unealimentationencourant
continu. 

SÉCURITÉ PERSONNELLE
• Rester attentif, prêter attention au travail et faire prévue de bon sens
lors de l’utilisation de tout outil électrique. 



Français
Perceuse à colonne 5 vitesses de 8 po
Manuel d’utilisation GDP500
•Utiliserl’équipementdesécurité.Toujoursporteruneprotection
oculaire. 

•Portezunetenueappropriée.



•Évitezd'undémarrageaccidentel.S


•Enlevezlesclésetoutilsderéglageavantdemettreenmarche.


•NEtravaillezpasàboutdebras.


•SIdispositifssontprévuspourlaconnexiond'extractiondes
poussières et des installations de collecte, 


.
•Maintenezl’outilsec,propreetsanshuileougraisse.


UTILISATION ET ENTRETIEN DE L’OUTIL
• Sécurisation de la pièce à travailler. 



• NE forcez pas sur l’outil. 


•Utilisezlebonoutilpourlatâche.


•N’utilisezpasl’outilsisoninterrupteurdemarche/arrêtfonctionne
mal. 

•Débrancherl’outilavantd’effectuerdesréglages,

•Rangerlesoutilsnonutiliséshorsdeportéedesenfantsetdes
personnes n’ayant pas reçu de formation adéquate. 


19
Français
•Entretenirsoigneusementlesoutils.



•N’utilisezquedesaccessoiresrecommandés.



•Maintenirdesoutilsdecoupenetteetpropre.

•Poussezlapièceàtravaillerdanslabonnedirectionàlabonne
vitesse. 


•NEjamaislaisserl'outilenmarchesanssurveillance.

•NEdémarrezjamaisunoutilquanduncomposantrotatifestdéjàen
contact avec la pièce travail lée.
SERVICE
•Demandezàvotreoutilélectriqueàêtredesservieparunepersonne
qualifiée en utilisant 
.
•L'entretiendevotreoutilélectriquepériodiquement


CONSERVEZ CES INSTRUCTIONS
AVERTISSEMENT: LISEZ ET ASSIMILEZ TOUS LES AVERTISSEMENTS,
MISES EN GARDE ET INSTRUCTIONS D’UTILISATION AVANT DE VOUS SERVIR
DE CET ÉQUIPEMENT. Sinon vous risquez commotion électrique, début
d’incendie et/ou blessures corporelles.
CORDONS RALLONGES
Les outils mis à la terre nécessitent un cordon rallonge à trois fils.












Français
Perceuse à colonne 5 vitesses de 8 po
Manuel d’utilisation GDP500
Conseils d’utilisation de cordons rallonges
 

 


 

RÈGLES DE SÉCURITÉ SPÉCIFIQUES POUR PERCEUSES À
COLONNE
AVERTISSEMENT: 
NE laissez PAS une fausse sécurité s’installer provoquée per confort et
familiarité avec le produit (suite à des utilisations répétées) remplacer la stricte
application des règles de sécurité pour la scie à onglets. Si vous utilisez cet outil
dangereusement et incorrectement, vous pouvez subir de sérieuses blessures.
•Assurez-vousquelaperceuseàcolonneestsurunesurfaceferme
et de niveau, 



 Débranchez la perceuse à colonne 

•Arrêteztoujourslaperceuseàcolonne

•Utiliserlavitesserecommandéepourl’accessoiredeperceuseetle
matériau.
•Attendezquelemoteuratteignesavitessemaximaleavantdepercer

•Portezuneprotectionoculaire.Nepasporterdesgants,cravate,ou
des vêtements amples.
Calibre de fil minimum recommandé pour cordons de rallonge (en 120 Volts)
Ampérage
nominal
(à pleine
charge)
Longueur du cordon de rallonge
7.6 m
25 Feet
15.2 m
50 Feet
22.9 m
75 Feet
30.5 m
100 Feet
45.7 m
150 Feet
61.0 m
200 Feet
0–2.0      
2.1–3.4      
3.5–5.0      
5.1–7.0      
7.1–12.0      
12.1–16.0      
16.1–20.0      