Genesis GLSI08B User manual

Operator’s Manual
Manuel d’utilisation
Manual del operario
8V Lithium-ion Cordless Soldering Iron
Fer à souder sans fil lithium-ion 8 v
soldadora inalámbrica de iones de litio de 8 v
GLSI08B
888-552-8665
TOLL FREE
HELP LINE:
WEBSITE: www.genesispowertools.com

English
8V Lithium-ion Cordless Soldering Iron
Operator’s Manual GLSI08B
SPECIFICATIONS
WARNING:To reduce the risk of injury, user must read and understand this
operator’s manual before operating this tool. Save this Manual for future reference.
Toll-Free Help Line: 1-888-552-8665
WARNING:
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
GENERAL SAFETY RULES
WARNING:Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
.
WARNING:Read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA SAFETY
Keep your work area clean and well lit.
Do not operate power tools in explosive atmospheres
2

3
English
Keep bystanders, children, and visitors away while operating a power tool.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet.
• Do not expose power tools to rain or wet conditions.
• Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
• Do not abuse the cord.
• When operating a power tool outside, use an extension cord suitable for
outdoor use.
• Do not use AC only rated tools with a DC power supply.
PERSONAL SAFETY
• Stay alert,
• Use safety equipment.
• Dress properly.
• Avoid accidental starting.
• Remove any adjusting keys or wrenches before turning the power tool on.
• Do not overreach.
.
• Do not use a ladder or unstable support.
• Keep tool handles dry, clean and free from oil and grease.
TOOL USE AND CARE
• Secure the workpiece.
• Do not force the power tool.
• Use the correct power tool for the job.
• Do not use tool if switch does not turn it on or off.
.
• Turn the power tool off, and disconnect the plug
.
.

English
8V Lithium-ion Cordless Soldering Iron
Operator’s Manual GLSI08B
• Store idle tool out of reach of children and other inexperienced persons.
• Maintain power tools with care.
• Use recommended accessories.
• Never leave the tool running unattended, turn the power off.
BATTERY TOOL USE AND CARE
Ensure the switch trigger is in the off position before inserting battery pack.
Recharge only with the charger specified by the manufacturer.
Use battery tools only with specified battery packs
Avoid storing the battery pack in a container with other metal objects such
as nails, coins, clips, keys, screws, or other small metal objects that can
make a connection from one terminal to another
Under abusive conditions, liquid may be ejected from the batter
Battery tools do not need to be plugged into an electrical outlet
SERVICE
• Haveyourpowertoolservicedbyaqualiedrepairperson
• Serviceyourpowertoolperiodically.
WARNING:READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND
OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
EXTENSION CORDS
Grounded tools require a three wire extension cord.
4

5
English
Guidelines for Using Extension Cords
SPECIFIC SAFETY RULES FOR CORDLESS SOLDERING
IRONS
WARNING:DO NOT LET COMFORT OR FAMILIARITY WITH THE PRODUCT
(GAINED FROM REPEATED USE) REPLACE STRICT ADHERENCE TO PRODUCT SAFETY
RULES. If you use this tool unsafe or incorrectly, you can suffer serious personal injury!
•
Do not touch the heated tip of the soldering iron
•
Be aware that this tool is always in an operating condition
,
•
Do not lay a soldering iron on its side
•
Do not place your hands or fingers near the tip of the soldering iron.
•
Always assume that the soldering iron tip is hot
•
Wear eye protection.
•
Use the soldering iron in a well-ventilated area to avoid breathing fumes.
•
Do not solder live circuits
•
The soldering iron tip is sharp.
•
Hold the soldering iron by the insulated gripping surfaces when performing
an operation where the tip may contact hidden wiring.
•
Do not point the tip of the soldering iron at another person.
•
Never leave the soldering iron unattended while it is in the on position.
•
Do not use or store the soldering iron near flammable or combustible
materials or liquids
•
Do not place battery tools near fire or heat.
SAVE THESE INSTRUCTIONS
Recommended Minimum Wire Gauge for Extension Cords (120 Volt)
Nameplate
Amperes
(At Full Load)
Extension Cord Length
25 Feet 50 Feet 75 Feet 100 Feet 150 Feet 200 Feet
0–2.0
2.1–3.4
3.5–5.0
5.1–7.0
7.1–12.0
12.1–16.0
16.1–20.0

English
8V Lithium-ion Cordless Soldering Iron
Operator’s Manual GLSI08B
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER &
BATTERY
• Save these Instructions.
• Before using the battery charger,
• Use only the charger
• Do not recharge the battery in damp or wet environments.
• Do not operate the charger with damaged cord or plug.
• Do not operate a charger if it has received a sharp blow,
• Do not disassemble a charger or a battery pack.
.
• Do not charge the battery pack
• Place the charger on flat non-flammable surface
.
• To reduce risk of electric shock,
• If operating time has become excessively shorter,
• Battery leakage may occur
• Do not attempt to use a step-up transformer,
• Do not short the battery pack.
• Do not charge a battery pack inside a box or container of any kind.
• Do not allow anything to cover or clog the charger vents.
• Do not incinerate the battery pack
• Disconnect the charger from the power source when not in use.
WARNING: A battery short can cause a large current flow, overheating,
possible burns and even a breakdown.
IMPORTANT BATTERY INFORMATION: DISPOSING OF THE BATTERY
SAVE THESE INSTRUCTIONS
6

7
English
KNOWING YOUR SOLDERING IRON
UNPACKING AND CONTENT
IMPORTANT:Due to modern mass production techniques, it is unlikely the product
is faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE:
Description QTY Description QTY
OPERATION
WARNING:
To reduce the risk of serious personal injuries, read and follow all
important safety warning and instructions before using this tool.
WARNING: Always be sure that the tool is switched off before insertion or
removal of the battery pack.
INSTALLING OR REMOVING THE BATTERY PACK
(FIG 2)
1
2
4
5
3
6
7
10
12
11
89
FIG 1
FIG 2
4
5

English
8V Lithium-ion Cordless Soldering Iron
Operator’s Manual GLSI08B
CHARGING THE BATTERY (FIG 3)
NOTE:
NOTE:
IRON HOLDER ASSEMBLY (FIG 4)
SWITCH ACTION (FIG 5)
NOTE:
WARNING: Always remove battery pack from the tool when you are assembling
parts, making adjustments, cleaning, or when not in use. Removing the battery pack will
prevent accidental starting that could cause serious personal injury.
USING SOLDERING IRON
WARNING: Do not hold the soldering iron with your fingers near any metal
part of the tool. The tip of the tool reaches working temperature within seconds. Always
assume that the soldering tip is hot. Touching a hot soldering tip can result in serious
personal injury.
MAINTENANCE
CLEANING
8
FIG 3
58
9LOCKING TAB
FIG 5
2
1
FIG 4
11
10

9
English
WARNING: Do not at any time let brake fluids, gasoline, petroleum-based
products, penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which may result in serious personal injury.
REPLACING SOLDERING TIP
WARNING: Always allow the soldering tip to cool for a minimum of 30 minutes
before removing the tip. Touching a hot soldering tip can result in serious personal
injury.
NOTEZGLSI08B-PTZGLSI08B-CT
TWO-YEAR WARRANTY
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
BATTERY INCLUDED IS WARRANTED FOR ONE (1) YEAR AFTER DATE OF PURCHASE.
TOLL-FREE HELP LINE
888-552-8665
www.genesispowertools.com
©Richpower Industries, Inc. All Rights reserved

Français
Fer à souder sans fil lithium-ion 8 v
Manuel d’utilisation GLSI08B
10
SPÉCIFICATIONS
AVERTISSEMENT: Pour réduire le risque de blessure, l’utilisateur doit lire
et assimiler ce manuel d’utilisation avant de se servir de l’outil. Conservez ce manuel
comme référence ultérieure.
Numéro d’aide sans frais: 1-888-552-8665.
AVERTISSEMENT:
Repérez ce symbole qui signale d’importantes
précautions de sécurité. Cela veut dire faites
attention ! Votre sécurité est en jeu.
RÈGLES GÉNÉRALES DE SÉCURITÉ
AVERTISSEMENT: Certaines poussières produites par des appareils
électriques de ponçage, sciage, meulage, perçage et autres travaux de construction
contiennent des produits chimiques connus pour causer cancer, anomalies congénitales
et autres atteintes à la reproduction. Voici quelques exemples de ces produits nocifs :
AVERTISSEMENT:LISEZ ET ASSIMILEZ TOUS LES AVERTISSEMENTS,
MISES EN GARDE ET INSTRUCTIONS D’UTILISATION AVANT DE VOUS SERVIR DE
CET ÉQUIPEMENT. Sinon vous risquez commotion électrique, début d’incendie et/ou
blessures corporelles.
CONSERVEZ CES INSTRUCTIONS

11
Français
LIEU DE TRAVAIL:
• Gardez propre la zone de travail.
• Ne pas utiliser d’outils électriques dans des atmosphères explosives,
• Garder les badauds, enfants et visiteurs à l’écart pendant l’utilisation d’un
outil électrique.
SÉCURITÉ ÉLECTRIQUE
• La puissance des bouchons outil doit correspondre à la prise électrique.
• NE PAS exposer les outils électriques à la pluie ou l’humidité.
• Éviter tout contact du corps avec des surfaces mises à la terre,
• NE PAS maltraiter le cordon d’alimentation.
• Lorsque l'exploitation d'un pouvoir en dehors des outils,
• NE PAS utiliser l'AC notées les outils d'une alimentation en courant
continu.
SÉCURITÉ PERSONNELLE
• Rester attentif, prêter attention au travail et faire prévue de bon sens lors
de l’utilisation de tout outil électrique.
• Utiliser l’équipement de sécurité. Toujours porter une protection oculaire.
• Portez une tenue appropriée.
• Évitez d'un démarrage accidentel. S
• Enlevez les clés et outils de réglage avant de mettre en marche.
• NE travaillez pas à bout de bras.

Français
Fer à souder sans fil lithium-ion 8 v
Manuel d’utilisation GLSI08B
12
• SI dispositifs sont prévus pour la connexion d'extraction des poussières
et des installations de collecte,
.
• Maintenez l’outil sec, propre et sans huile ou graisse.
UTILISATION ET ENTRETIEN DE L’OUTIL
• Sécurisation de la pièce à travailler.
• NE forcez pas sur l’outil.
• Utilisez le bon outil pour la tâche.
• N’utilisez pas l’outil si son interrupteur de marche/arrêt fonctionne mal.
• Débrancher l’outil avant d’effectuer des réglages,
• Ranger les outils non utilisés hors de portée des enfant set des personnes
n’ayant pas reçu de formation adéquate.
• Entretenir soigneusement les outils.
• N’utilisez que des accessoires recommandés.
• NE jamais laisser l'outil en marche sans surveillance.
UTILISATION ET ENTRETIEN DES OUTILS À BATTERIE
Veillez à ce que l’interrupteur soit dans la postion de fermeture
Rechargez avec le chargeur spécifié par le fabricant
Utilisez uniquement des outils électriques conçus spécifié batterie
Évitez de stocker la batterie dans un conteneur
Dans des conditions abusives,

13
Français
Les outils fonctionnant sur batteries n’ayant pas besoin d’être branchés sur
une prise secteur
SERVICE
• Demandez à votre outil électrique à être desservie par une personne
qualifiée en utilisant
.
• L'entretien de votre outil électrique périodiquement.
AVERTISSEMENT: LISEZ ET ASSIMILEZ TOUS LES AVERTISSEMENTS,
MISES EN GARDE ET INSTRUCTIONS D’UTILISATION AVANT DE VOUS SERVIR DE
CET ÉQUIPEMENT. Sinon vous risquez commotion électrique, début d’incendie et/ou
blessures corporelles.
CONSERVEZ CES INSTRUCTIONS
CORDONS RALLONGES
Les outils mis à la terre nécessitent un cordon rallonge à trois fils.
Conseils d’utilisation de cordons rallonges
Calibre de fil minimum recommandé pour cordons de rallonge (en 120 Volts)
Ampérage
nominal
(à pleine
charge)
Longueur du cordon de rallonge
7.6 m
25 Feet
15.2 m
50 Feet
22.9 m
75 Feet
30.5 m
100 Feet
45.7 m
150 Feet
61.0 m
200 Feet
0–2.0
2.1–3.4
3.5–5.0
5.1–7.0
7.1–12.0
12.1–16.0
16.1–20.0

Français
Fer à souder sans fil lithium-ion 8 v
Manuel d’utilisation GLSI08B
14
RÈGLES DE SÉCURITÉ SPÉCIFIQUES POUR PISTOLET À
COLLE SANS FIL
AVERTISSEMENT: NE laissez PAS une fausse sécurité s’installer
provoquée per confort et familiarité avec le produit (suite à des utilisations répétées)
remplacer la stricte application des règles de sécurité pour la scie à onglets. Si vous
utilisez cet outil dangereusement et incorrectement, vous pouvez subir de sérieuses
blessures.
•Netouchezjamaislapannechaudeduferàsouder.
• Sachezquecetoutilesttoujoursenétatdefonctionnement,
•Neposezjamaisunpistoletàsoudersurlecôté.
• Neplacezjamaisvosmainsouvosdoigtsprèsdelapannedufer.
• Parteztoujoursduprincipequelapanneestchaude.
• Porteztoujoursuneprotectionoculaire
• Utilisezlepistoletàcolledansunendroitbienventilépouréviterde
respirer des vapeurs de colle chaude.
• Nesoudezjamaisdescircuitsélectriquessoustension.
• Lapanneduferàsouderesttranchante.
• Tenezleferàsouderpardessurfacesdepréhensionisolées,lorsque
vous effectuez une opération où la panne peut entrer en contact avec un
câblage caché.
• Nepointezpaslapanneduferàsouderversuneautrepersonne.
• Nelaissezjamaisleferàsoudersanssurveillancelorsqu'ilestenposition
de marche.
• N’utilisezounerangezjamaisleferàsouderàproximitédematériaux
ou de liquides inflammables ou combustibles.
• Ne pas placer les outils électriques sans fil ou leurs batteries
CONSERVEZ CES INSTRUCTIONS
INSTRUCTIONS DE SÉCURITÉ IMPORTANTES RELATIVES
AU CHARGEUR ET AU FONCTIONNEMENT DE LA BATTERIE
Conserver ces instructions !
Avant d'utiliser le chargeur de batteries
Utilisez uniquement le chargeur qui accompagne votre produit
Ne pas recharger la batterie en environnement humide ou mouillé
Ne pas utiliser le chargeur avec cordon endommagé ou la fiche
Ne pas utiliser le chargeur s’il a reçu un choc violent

15
Français
Ne pas désassemblez le chargeur ou la bloc de batterie
Ne pas chargez le bloc de batterie
Placez le chargeur sur une surface plate ininflammable
Afin de réduire le risque de choc électrique,
Si l’autonomie de l’outil avant recharge est presque nulle,
Il peut y avoir une fuite de batterie dans des conditions extrêmes d’utilisation
ou de température.
Ne pas essayer d'utiliser un transformateur élévateur,
Ne pas court-circuiter les bornes de le batterie
Ne pas chargez la bloc de batterie dans une boîte ou un contenant de tout
genre
Ne pas couvrir ou obstruer les évents du chargeur
Ne pas incinérer la bloc de batterie,
Lorsqu’il n’est pas en usage
AVERTISSEMENT: Un court-circuit de batterie peut provoquer une intensité
de courant importante, une surchauffe, des brûlures éventuelles et même une panne.
INFORMATIONS IMPORTANTES AU SUJET DE LA BATTERIES
LITHIUM-ION
CONSERVEZ CES INSTRUCTIONS

Français
Fer à souder sans fil lithium-ion 8 v
Manuel d’utilisation GLSI08B
16
VOTRE FER À SOUDER SANS FIL
OUVERTURE DE L`EMBALLAGE ET CONTENU
IMPORTATNT:Grâce à des techniques modernes de production de masse, il est
peu probable que l'outil est défectueux ou qu'une pièce est manquante. Si vous trouvez
quelque chose de mal, ne pas faire fonctionner l'outil jusqu'à ce que les parties ont été
remplacés ou la faute a été corrigée. Le fait de ne pas le faire pourrait entraîner des
blessures graves.
CONTENU DE CARTON DE PIÈCES EN VRAC:
Description QUAN Description QUAN
FONCTIONNEMENT
AVERTISSEMENT:
Pour réduire le risque de graves blessures
corporelles, lisez et suivez toutes les instructions et avertissements de sécurité avant
d'utiliser cet outil.
AVERTISSEMENT: Assurez-vous toujours que
l'outil est à l'arrêt avant d'insérer ou de retirer le bloc de
batteries.
INSTALLATION OU RETRAIT DE LA BATTERIE
(FIG 2)
1
2
4
5
3
6
7
10
12
11
89
FIG 1
FIG 2
4
5

17
Français
CHARGEMENT DES BATTERIES (FIG 3)
REMARQUE:
REMARQUE :
ASSEMBLAGE DU SUPPORT DU FER (FIG 4)
INTERRUPTEUR D’ACTION (FIG 5)
REMARQUE :
AVERTISSEMENT: Retirez toujours le bloc-batterie de l'outil lorsque vous
assemblez des pièces, effectuez des réglages ou nettoyez le fer, et lorsque vous ne
l'utilisez pas. Le retrait du bloc-batterie permet d'éviter tout démarrage accidentel
susceptible de causer des blessures graves.
UTILISATION DU FER À SOUDER
AVERTISSEMENT: Ne tenez pas le fer à souder avec vos doigts près
d'une partie métallique de l'outil. La panne du fer atteint la température de travail en
quelques secondes. Partez toujours du principe que la panne est chaude. Le non-
respect de ces instructions peut entraîner des blessures graves.
FIG 3
58
9
LANGueTTe de
verrOuILLAGe
FIG 5
2
1
FIG 4
11
10

Français
Fer à souder sans fil lithium-ion 8 v
Manuel d’utilisation GLSI08B
18
ENTRETIEN
NETTOYAGE
AVERTISSEMENT: Ne jamais laisse de liquides tels que le fluide de freins,
l’essence, les produits à base de pétrole, les huiles pénétrantes, etc., entrer en contact
avec les pièces en plastique. Les produits chimiques peuvent endommager, affaiblir ou
détruire le plastique, ce qui peut entraîner des blessures graves.
REMPLACEMENT DE LA PANNE
AVERTISSEMENT: Laissez toujours refroidir la panne pendant au moins
30 minutes avant de la retirer. Le non-respect de ces instructions peut entraîner des
blessures graves.
REMARQUE :ZGLSI08B-PTZGLSI08B-
CT
GARANTIE DE DEUX ANS
CE PRODUIT N’EST PAS GARANTI S’IL EST UTILISÉ POUR DES FINS INDUSTRIELLES OU COMMERCIALES.
LES ACCESSOIRES COMPRIS DANS CE KIT NE SONT PAS COUVERTS PAR LA GARANTIE DE 2 ANS.
LA BATTERIE EST GARANTIE POUR UNE (1) AN APRÈS LA DATE DE L'ACHAT.
LIGNE D’ASSISTANCE SANS FRAIS
888-552-8665
www.genesispowertools.com

19
Español
ESPECIFICACIONES
ADVERTENCIA: Para reducir el riesgo de lesiones, el usuario debe leer
y entender este manual del operario antes de operar esta herramienta. Guarde este
manual para consultas futuras.
Línea de ayuda gratuita: 1-888-552-8665.
ADVERTENCIA:
Busque este símbolo que indica precauciones de
seguridad importantes. Éste significa ¡¡¡atención!!!
Su seguridad está involucrada.
REGLAS GENERALES DE SEGURIDAD
ADVERTENCIA: Algunos polvos producidos por actividades como
lijar, aserrar, pulir, taladrar y otras actividades relacionadas con la construcción
contienen productos químicos que se sabe causan cáncer, defectos de nacimiento u
otros daños en el sistema reproductivo. Algunos ejemplos de estos productos químicos
son:
ADVERTENCIA: ANTES DE UTILIZAR ESTE EQUIPO, LEA Y ENTIENDA
TODAS LAS ADVERTENCIAS, PRECAUCIONES E INSTRUCCIONES DE OPERACIÓN.
No seguir todas las instrucciones enumeradas a continuación, podría resultar en una
descarga eléctrica, un incendio y/o lesiones personales graves.
GUARDE ESTAS INSTRUCCIONES
Ò
Ò

Español
Soldadora de iones de litio de 8 v
Manual del Operario GLSI08B
20
ÁREA DE TRABAJO
• Mantenga limpia y bien iluminada el área de trabajo.
No utilice herramientas motorizadas en atmósferas explosivas,
Mantenga alejados a los circunstantes,
SEGURIDAD EN EL MANEJO DE EQUIPOELÉCTRICO
• La herramienta eléctrica enchufes debe coincidir con la toma de corriente
No exponga las herramientas eléctricas a la lluvia ni a condiciones de
humedad.
Evite el contacto del cuerpo con las superficies de objetos conectados a
tierra
No maltrate el cordón eléctrico.
Al utilizar una herramienta eléctrica en el exterior,
No utilice el adaptador de CA evaluado las herramientas con un suministro
de corriente.
.
SEGURIDAD PERSONAL
• Permanezca alerta,
Use equipo de seguridad
Vístase adecuadamente
Evite un arranque accidental de la unidad.
Retire toda llave o herramienta de ajuste antes de encender la herramienta
eléctrica
No estire el cuerpo para alcanzar un distancia mayor a la natural
Table of contents
Languages:
Other Genesis Power Tools manuals

Genesis
Genesis GHD1260 User manual

Genesis
Genesis GDP1005A User manual

Genesis
Genesis GHG350 User manual

Genesis
Genesis GLRT08B-65 User manual

Genesis
Genesis VS GMT16V User manual

Genesis
Genesis GRT2103-40 User manual

Genesis
Genesis GJS450 User manual

Genesis
Genesis GLIW20AK User manual

Genesis
Genesis GDP1012A User manual

Genesis
Genesis GLMT08B User manual

Genesis
Genesis GLMT12 User manual

Genesis
Genesis GLSS08B User manual

Genesis
Genesis GLVC08B User manual

Genesis
Genesis GLRT04V50 User manual

Genesis
Genesis GDP500 User manual

Genesis
Genesis GJS500 User manual

Genesis
Genesis GMT25T User manual

Genesis
Genesis GMT15A User manual

Genesis
Genesis GDP805P User manual

Genesis
Genesis GES40 User manual