Genie GIPW4NPIR User manual

Quick Start Guide
Please read these instructions carefully before operating the unit
and keep for further reference. All the examples and pictures used
here are for reference only. The contents of this manual are subject
to change without notice.
4MP Dual Stream IP PIR
Camera
GIPW4NPIR

2
Introduction
The Genie GIPW4NPIR is an NDAA compliant, PIR with a 4MP IP camera pre in-
stalled. The camera is supplied with a 3.7mm pinhole lens and can be powered
with either a 12v psu or a PoE switch / injector.
Features
• 4MP resolution
• 1/ 3” 4MP CMOS sensor
• Smart H.265+/H.265/H.264+/H.264
• Dual streaming
• Support ROI
• Remote access from Mobile
• SD card up to 256g
• 5–10m invisible 36pcs IR
• Wi-Fi Device
• NDAA compliant
• POE/12V DC
Specifications
Quick Start Guide 4MP Dual Stream IP PIR Camera
Camera
Image Sensor 1/3” CMOS 4 Megapixel Image Sensor
Scan Method Progressive Scan
Elec. Shutter Auto, Manual
Colour Adjust Bright / Contrast / Saturation / Sharpness
Max. Resolution 2560(H) x 1440 (V)
ROM / RAM 16MB / 64MB
Min. Illumination Colour: 0.001 Lux @ (F1.2, AGC ON); B/W: 0.0001 Lux @ (F1.2,
AGC ON), 0 Lux with IR
S/N Ratio 38 dB
Illumination Distance 10m (IR) 36pcs SMD IR
Illumination On/Off Auto Manual
Lens 3.7mm Pinhole
Lens Field of View 95°
Network
Protocol IPv4;HTTP; TCP/UDP;RTSP;DHCP;CGI
ONVIF (Profile S/ Profile T); P2P;
Storage Micro SD card (support max. 256g)
Browser Microsoft Edge, Chrome, Firefox, Safari
Mobile iOS; Android
Others
Operating Temperature -10°C to +50°C /Less than 95% RH
Storage Temperature -20°C to +60°C /Less than 95% RH
Power Supply 12V DC/PoE (802.3af )
Power Consumptio Basic: 4.96W
Protection Grade IP64
Alarm Motion Detection

3
Quick Start Guide 4MP Dual Stream IP PIR Camera
Video
Compress Format H.265 / H.264
Resolution 4M (2560×1440);1080P (1920×1080); 720p (1280×720);D1
(720×576);CIF (352×288)
Video Frame Rate
Main Stream: 2560×1440@ (25fps)/1080p (1920 × 1080)@
(25fps)/720p (1280 × 720)@(25fps) Sub Stream: 720 × 5762@
(25fps)/ 352 × 288@(25 fps)
Bit Rate Control CBR / VBR
Video Bit Rate Main Stream: 512/1024/1536/2048/3072/4096 kbps
Sub Stream: 512/1024 kbps
Streaming 2 Streams
Day & Night Auto / Manual
BLC Yes
HLC Yes
WDR Yes (>100 dB)
White Balance Auto, Manual
Gain Control Auto, Manual
Noise Reduction 3D NR
Motion Detection Yes (396 areas)
Region of Interest (RoI) Yes (8 areas)
Smart Illumination Yes
Defog Yes
Image Mirror / Flip Yes / Yes
Privacy Masking Yes (5 areas)
POE Connect
Connect the camera to the power supply and NVR as shown below.

4
Quick Start Guide 4MP Dual Stream IP PIR Camera
Use of search tools
1. Connect the device to the power supply and network cable, then connect the
computer to the local area network and open the IP55 application in the search
tool.
2. After opening the application software, click “Network” in the upper left corner,
select the network segment where the computer is located, and after confirming,
you can search for devices in the local area network, and the device information is
arranged in the list on the right.
3. Click the IP on the right to view the device ID, and then modify the IP on the
device in the options below.
4. Enter the IP displayed by the device in the browser. Click the “Enter” button
to enter the web interface on the device. Enter the default account: admin and
password: 123456 to enter the preview interface of the device to view the real-time
image of the device.
5. In the left column menu, you can operate a series of device parameters as shown
in the figure.
Main/Substream:
Video playback:

5
Quick Start Guide 4MP Dual Stream IP PIR Camera
Parameter viewing and modification:
Device upgrade, reboot, reset, maintenance:

Sales [phone]
Enquiries [email protected]o.uk
Website www.genieproducts.co.uk