Image Device 1/2.9“ 2.3 Mega Pixel SONY CMOS
Scanning system Progressive
Resolution AHD : 1080P 30FPS, 720P 60FPS / CVBS : 1280H
Total Pixels 2000 (H) ×1121 (V) approx. 2.24 M pixels
Effective Pixels 1984 (H) ×1105 (V) approx. 2.19 M pixels
Shutter Speed Auto / Manual ( 1/30(1/25) ~ 1/60000 ) / Flicker
Min. illumination Color DSS: 0.002 Lux / BW DSS : 0.001 Lux
S/N Ratio ≥80dB
SENS Up x2 / x4 / x8 / x16 / x32
Day & Night Auto / COLOR / B&W / EXT
Smart IR Off / On
White Ballance Auto / Auto Ext / Preset / Manual
Mirror Off / H / V / H&V
D-Zoom x1 ~ x8
DNR ( 3D + 2D ) Off / Low / Middle / High
Privacy Off / On (16 points)
Motion Off / On (16 points)
Shading 0 ~ 100%
DEFOG Off / On
D-WDR / BLC / HLC Off / WDR(Low / Middle / High) / BLC / HLC
Coaxial
Communication Pelco-C Protocol or OSD Control
Language ENG, GER, FRA, ITA, SPA, POL, RUS, POR, NED, TUR
Video Output AHD. CVBS
Power Supply DC12V
Power Consumption Max 1.8W
Operating Temp. -10℃~ 50℃
PRECAUTIONS
• Do not install the camera in extreme temperature conditions.
- Only use the camera under conditions where temperatures are
between -10℃and +50℃. Be especially careful to provide
ventilation when operating under high temperatures.
• Do not install or use the camera in an environment where the humidity is
high.
- It can cause the image quality to be poor
• Do not install the camera under unstable lighting conditions.
- Severe lighting change or flicker can cause the camera to work
improperly.
• Never use the camera close to a gas or oil leak.
- It can cause malfunctions to occur.
• Do not disassemble the camera.
- There are no user-serviceable parts inside it.
• Do not touch the front lens of the camera.
- It is one of the most important parts of the camera. Be careful
not to be stained by fingerprint.
• Do not drop the camera or subject them to physical shocks.
- It can cause malfunctions to occur
• Do not expose the camera to rain or spill beverage on it.
- If it gets wet, wipe it dry immediately. Liquids can contain
minerals that corrode the electronic components.
• Do not expose the camera to radioactivity.
- If it is exposed to radioactivity, the image sensor will fail.
* NOTE *
• If the camera is exposed to spotlight or object reflecting strong
light, smear or blooming may occur.
• Please check that the power satisfies the normal specification before
connecting the camera
COMPOSITION
NAME OF EACH PART
Camera Screw
DIMENSION
SPECIFICATIONS
* In accordance with customers’ request and OSD controller’s option, the specifications can be fixed or changed without notice.
CABLE CONNECTION
1. VIDEO
2. POWER(DC12V)
Manual
