Charging -----------------------------------------------------------------
The device is powered by 1 battery of CR2032 type (tablet) (NOT
INCLUDED)
•Remove the battery cover at the back of the device, insert a 3V
battery into the battery compartment.
•Then close the battery cover.
______________________________________________________________
How to operate
Howto operate
1. Connect the device to the electrode gel pad
with the snap button.
2. Remove the PE protecting film of the
electrode gel pad, then place the pad around
your chin (keep the PE protecting film for storage)
3. Press once the On/Hi button to turn on the
device. The power light will turn on.
k. There are 10 levels of stimulation intensity.
Press the On/Hi button again to select the
massage intensity.
Recommend!
Recommendto increase the intensity gradually, in order to feel which
intensity level is most suitable for your need. For better result, we
recommend you to lie down during the massage, then the gel pad will
stick firmly to the skin.
5. The device is equipped with 10 minutes auto timer, counting down
10 minutes after selecting the intensity level. After 10 minutes of
massage, the device will turn off automatically.
6. You can turn the device off any time by pressing the Off/Lo key till
the indicating light is off.