Gigaset SL610H pro User manual

1
PRO DECT Phones QSG / engbt / A31008-M2350-L101-3-7643 / DECT_QSG_eng_7.fm / 26.03.2012
Version 2, 06.08.2010
The Gigaset SL610H PRO handset is used here to describe how to make calls from a DECT base station Gigaset
N510 IP PRO or a Gigaset N720 DECT IP Multicell System.
We also recommend the following handsets for professional use: SL400H, C610H, S810H, E49H.
Note: Not all handsets and base stations feature the same functions.
Control key
Gigaset PRO IP DECT Phones
1Control key
Direct access to menu and phone functions
2Handsfree key
Switch between handset and handsfree mode
Start dialling (press and hold)
3Talk key
Accept a call, open redial list (press briefly), start dialling
(press and hold),
Flashes: incoming call
4Key 1
Dial (network) mailbox (press and hold)
5Star key
Ringtone on/off (press and hold),
with an existing connection: switch between pulse dial-
ling/tone dialling (press briefly)
text input: open table of special characters
6Callback key
Callback (flash), insert a dialling pause (press and hold)
7Display keys
Access display functions
8Message key
Access to caller and message lists,
Flashes: new message or new call
9End call key, ON/OFF key
End call, cancel function,
activate/deactivate handset (press and hold in idle mode)
10 Hash key
keypad lock on/off (press and hold in idle mode)
Text input: toggles between upper/lower case and digits
11 Mute key
Mute the microphone
7
8
10
10
6
5
4
2
1
3
Messaging
Ç È É
ÊËÌ
á Â Ï
Back OK
9
In idle mode:
w or vopens the main menu.
sOpens the directory. Press and hold: Opens the
network directory.
tSets the volume.
uHandset on a DECT base station:
Opens the list of handsets logged onto the same
base station.
Handset on a Gigaset N720 DECT IP Multicell
System: Opens the company's directory.
In menus and lists:
wDepending on the operating mode: Selects
entry, saves setting, confirms action.
qNavigates one line up/down.
In input boxes:
qMoves cursor up/down.
rMoves cursor to the left/right.

PRO DECT Phones QSG / engbt / A31008-M2350-L101-3-7643 / DECT_QSG_eng_7.fm / 26.03.2012
Version 2, 06.08.2010
2
Information services: In the (v¢È) menu, you can access information services if they have been acti-
vated by the administrator.
Email notification: When a new e-mail lands in your inbox, you will receive a notification in the message centre
provided that the administrator activated this function when setting up the e-mail account (access via the mes-
sage key f).
cPress the talk key to make a call with the hand-
set.
dPress the handsfree key to make a call over the
handset speaker. Use this key to operate a
headset if a headset is connected to the hand-
set.
You can toggle between handset/headset mode at
any time during a call.
Making calls
~c Enter the call number, press the talk key.
Cancel dialling or end the call
aPress the end call key.
While entering the call numbers
ÛPress the display key to delete an incorrectly
entered number.
Dialling with the speed dial key
Q, 2... O
Press and hold a speed dial key. The call
number saved in this key for speed dial is then
dialled.
Withholding number when
calling
You can withhold your number for the next call.
v¢ÇSelect Services ¢Next Call anon.
~cEnter the call number or transfer number
from the directory, press the talk key.
Accepting calls
You will hear the ringtone and the ctalk key
flashes. The call appears in the display.
cPress the talk key or press the dhandsfree
key. You can now talk to the caller.
Display
Display icons
Signal strength Keypad lock switched
on
ECO mode activated Battery charging
Bluetooth activated Battery charge status
Headset connected Network mailbox
Data device con-
nected
Missed calls
Ringtone switched off Message list
Alert tone activated Missed appointments
New
messages
Calls Calendar
i»ó ˝V
¼08:00 07:15
Mobile 05 Apr
Ù¾
02 10 09
Display
icons
Alarm
Time
Date
Name of the
handset
Display
functions
i
˝
¼

»
V
ô
Ã
õ
™
ó
¾
ñ
á
Calling

3
PRO DECT Phones QSG / engbt / A31008-M2350-L101-3-7643 / DECT_QSG_eng_7.fm / 26.03.2012
Version 2, 06.08.2010
Muting
hPress the mute key during the call. Press the
key again to deactivate the mute function.
Activating/deactivating handsfree mode
Activate when dialling
~d Enter the number and press the hands-
free key.
Switching between handset and handsfree mode:
dPress the handsfree key.
If you want to return the handset to the charger
during a call:
dPress and hold the handsfree key when
returning the handset and hold for another
2 seconds.
Adjusting the volume of the handset,
speaker or headset
tPress the control key to open the Handset Vol-
ume menu.
rSet the headset/handsfree volume.
Deactivating the ringtone permanently
*Press and hold the star key. Press again to
reactivate the ringtone.
Accepted, missed and outgoing (redial list) calls are
stored.
Dialling call numbers from the call list
cPressthe talk key to openthe redial list or
v¢ÊOpen the call lists via the menu and
select the list you require.
The last call or the last call number dialled is dis-
played.
qSelect another entry, if required.
cPress the talk key. The number is dialled.
Copying entries from the call list into the
local directory
qScroll through the list until you find the name
you want.
§§ Press Options§§.
qSelect Copy to Directory and press §§OK§§ to
confirm.
The directory opens. You can add a new entry to the
directory or change an existing entry.
Switching to mute, handsfree, ringtone
Call lists

PRO DECT Phones QSG / engbt / A31008-M2350-L101-3-7643 / DECT_QSG_eng_7.fm / 26.03.2012
Version 2, 06.08.2010
4
Dialling numbers
ZPress the scontrol key to open the directory.
qScroll through the list until you find the name
you want.
cPress the talk key. If more than one number is
entered, press rto select the number you
require and press the ctalk key again. The
number is dialled.
Note: You can also search for call numbers in online
directories and/or a company directory if they are
available (see user guide).
Entering new contacts
t<New Entry>
¤Multi-line entry:
First Name, Surname etc.
Caller Melody (VIP): Mark a
directory entry as a VIP by
assigning a specific ringtone
to it.
qNavigate from one
field to the next.
§Save§ Save the direc-
tory entry.
See the user guide for details on how to enter text.
Inquiry call
You want to make an inquiry call to a second person
during a call. The first call is put on hold. The person
on hold hears a message or an on-hold tune.
§ Press the Ext. Call§display key during a call.
Note: This is not possible with an internal call
between two handsets on the same base station.
~Enter the call number of the second per-
son you want to call.
If the second person does not respond, press §End§ to
return to the first person you were talking to.
Ending the inquiry call
§Options§ ¢End Active Call
You will then be connected to the first
person you were talking to again.
Toggling
You are talking to one person; another is put on hold,
for example, because you have accepted a waiting
call or you have put a call on waiting. Both people are
displayed. You can toggle between both of them.
qSwitch between callers using the control key.
The person you are currently talking to is marked
with æ.
Ending the currently active call
§Options§ ¢End Active Call
You will then be connected to the caller who is wait-
ing.
Note: If you have two callers waiting on the line, you
cannot start an inquiry call.
Conference
Note: Only applies to Gigaset N510 IP PRO.
You are in the middle of one call and have called a
second person (inquiry call) or have accepted a wait-
ing call. You can talk to a maximum of two people at
once.
§Conf.§ You and both the other callers (both
marked with æ) can hear each other
and talk to each other.
Ending conference calls
§EndConf§ Return to the "toggle" mode. You will be
reconnected to the person with whom
you started the conference call.
aPress the end call key to end the call with
both people.
Directory
New Entry
ÛSave
First Name:
Surname:
Phone (Home):
Abc
Calls involving several participants

5
PRO DECT Phones QSG / engbt / A31008-M2350-L101-3-7643 / DECT_QSG_eng_7.fm / 26.03.2012
Version 2, 06.08.2010
Forwarding calls
You are talking to one person and want to forward
the call to a third party.
§§ Press the Ext. Call§display key.
~Enter the call number of the second per-
son you want to call. The call number is
dialled. You are connected to the second
person.
In the telephone configuration, you can determine
how a call is forwarded:
By activating the call forwarding function with the R
key:
SPress the R key. The call is then forwarded.
By activating the call forwarding function by ending
the call:
aPress the end call key (even before answering)
to forward the call.
Call waiting
You hear the call waiting tone during a call. You can
accept or reject the call.
§Accept§ Accepting a call.
§Reject§ Rejecting a call.
Note: You can also press the aend call key to end
the active call and then press the ctalk key to
accept the second call.
Redirecting calls
v¢ÇSelect Services ¢Call Divert
¤Multi-line entry:
Status Activating/deactivating call forwarding
Phone Number
Enter the number to where you want to for-
ward thecall.
When Select the time: All Calls, When Busy or No
Answer.
§OK§ Activate the call forwarding function and
§Send§.
Message key
Open the message centre using the fmessage
key.
ÃVoicemail (network mailbox)
™Missed calls
ËEmails
nMissed appointments
The fmessage key flashes if there is a new entry
for one of these types of messages.
Digit keys – speed dial function
You can save a call number on the digit keys Qand
2- Othat can then be dialled with just one
press of a button.
Q, 2to OPress and hold the digit key.
Display keys – direct access to
numbers and functions
A function is assigned to the left and right display
key. You can change the key shortcut function. Press
the key to dial the number or activate the function.
¤Press and hold the left or right-hand display key.
The key shortcut list opens.
¤Select the function and press §OK§.
Note: This function is not available for all mobile
phone models.
Special keys and key shortcuts

PRO DECT Phones QSG / engbt / A31008-M2350-L101-3-7643 / DECT_QSG_eng_7.fm / 26.03.2012
Version 2, 06.08.2010
6
For access to the phone system functions for Gigaset T300 PRO/Gigaset T500 PRO
During a call
Additional service features
Managing conference calls
Issued by Gigaset Communications GmbH; Frankenstr. 2a; D-46395 Bocholt. © Gigaset Communications GmbH 2012.
All rights reserved. Subject to availability. Rights of modification reserved. www.gigaset.com. A31008-M2350-L101-3-7643
Key shortcuts
*2 + Call number Marking calls as private.
*32 + Group ID Logging the user into the group.
*33 + Group ID Logging the user out of the group.
*L + Speed dial Calling a number using speed dial.
*MM + Login ID Logging on to the phone.
*MN + Login ID Logging out of the phone.
*MO Logging all users out of the phone.
*N + Internal call
number
Picking up a call for the user with this call number.
*N Randomly picking up a call.
*O + Voicemail box ID Checking for voicemail.
*** + Number Establishing a call via a line with corresponding line prefix.
** Call2Go: Forwarding a call to your other phones.
Note: Only available from Gigaset T300 PRO/Gigaset T500 PRO software version 5 upwards.
*Recording a call and sending as voicemail.
*2 + Call number Transferring a call with inquiry function.
*3 Initiating a conference call with an active and a waiting caller. Note: Only available from
Gigaset T300 PRO/Gigaset T500 PRO software version 5.1 upwards.
*Q + Target call
number
Activating the general redirect function for all calls (Always) to one
target call number.
*QQDeactivating the redirect function.
*Q2+ Target call
number
Activating the redirect function for all calls to the target call number
when busy.
*Q2Q Deactivating the redirect function for all calls when busy.
*Q3+ Target call
number
Activating the redirect function for all calls to the target call number
on timeout (no response).
*Q3Q Deactivating the redirect function for all calls on timeout.
*QMActivating the callback function when the line is busy.
*QMQ Deactivating the callback function when the line is busy.
*QN +00 to 99
(waiting ID)
Placing a held caller in a call queue or taking a caller from the queue.
*QOActivating the Do-Not-Disturb (DND) function for all phones.
*QOQ Deactivating the Do-Not-Disturb (DND) function for all phones.
*Accessing the control options language menu.
*Activating and deactivating mute (microphone).
*2 Requesting to speak if the moderator has activated the mute function.
*3 Moderator: Blocking and unblocking conference calls.
*4(...4)NGradually reducing the handset volume. N= save.
*L(...L)NGradually increasing the handset volume. N= save.
*M(...M)NGradually reducing the microphone volume. N= save.
*O(...O)NGradually increasing the microphone volume. N= save.