Gira System 3000 User manual

System 3000
Blind timer and timer Display
Blind timer and timer Display
Order no.: 5366 ..
User manual
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
These instructions are an integral part of the product, and must remain with the end customer.
2 Device components
Figure1: Display and operating area
(1) active functions
(2) Time of the next action or current time of day
(3) Type of the next action
(4) Operating area
Icons in the display
The icons in the display are adjusted depending on the type of insert.
ƘAutomatic operation is active, next switching time is displayed for 2 minutes
ƚAstro function is active
ƗDisabling function is active
ƞ / ƟDisplays the direction of the next travelling time. Flashes when controlling the
insert
OFF / ON Displays the type of the next switching operation
Ƥ / ƥDisplays the current switching state
Icons of the operating area (4)
ƧStep back
ƨConfirm inputs
1 / 10
32596512 10865949 10.07.2018

System 3000
Blind timer and timer Display
ƘSwitch between manual operation and automatic operation
ƞ / ƟOperation of the insert and navigation in the menu
ƣCall up and terminate the programming menu
3 Function
Intended use
– Manual and time-controlled operation of Venetian blinds, shutters, awnings or lighting
– Operation switching, dimming or Venetian blind insert or 3-wire extension of System 3000
Product characteristics
– Current time can be saved as switching time, quick programming
– Automatic summer/winter time changeover, can be switched off
– Switching at sunrise and/or before sunset (Astro function) adjustable for 18 countries
– Astro time shift for sunrise and sunset
– Disabling function
– Display switches off after 2 minutes,
Permanent indication of the current time possible
Depending on the insert used
– Activation of blind/shutters
– Programming of one up time and one down time each for the parts of the week Mo-Fr and
Sa+Su
– Ventilation position of the blind/shutter can be saved
– Switching and dimming of lighting
– Programming of two memory areas with one switch-on and one switch-off time each for
the parts of the week Mo-Fr and Sa+Su
– Switch-on brightness of lighting can be saved, with dimming insert
Behaviour after a mains voltage failure
Voltage failure less than 4 hours
– All data and settings are preserved
– Missed switching times are not performed later
Voltage failure greater than 4 hours
– Year flashes and no switching operations are executed
– Date and time must be set again
– All switching times are preserved
Default setting
– Switching times on a Venetian blind insert:
ƞ 07:00, Mo - Fr
Ɵ 21:00, Mo - Fr
ƞ 09:00, Sa - Su
Ɵ 21:00, Sa - Su
– Switching times on a switching or dimming insert, memory area ƙ:
on 16:00, Mo - Fr
off 09:00, Mo - Fr
on16:00, Sa - Su
off 09:00, Sa - Su
– No switching times are stored in the second memory area Ʀ
– Astro function is active with times for Germany (+49)
– Automatic mode is active
– Automatic summer/winter time changeover is active
2 / 10
32596512 10865949 10.07.2018

System 3000
Blind timer and timer Display
4 Commissioning
Set date and time
During the initial commissioning, a reset or a voltage failure of more than 4 hours, the year
flashes in the display and the following data must be set.
The times are changed in steps of 5 by pressing Ɵ or ƞ for a longer time.
￭ Change the year with Ɵ or ƞ and confirm with ƨ.
After that, month, day, hour and minute flash successively.
￭ Change the data with Ɵ or ƞ and confirm with ƨ.
+ 49 flashes in the display, the country code of Germany.
￭ Confirm with ƨ or select another country code with Ɵ or ƞ and confirm with ƨ.
The Astro times of 18 countries can be loaded via the country code.
YES flashes in the display for the automatic summer/winter time changeover (Ơ).
￭ Confirm with ƨ.
Changing to No deactivates the automatic summer/winter time changeover.
The setting is completed. The device is in automatic mode.
Country code
Astro calendars for 18 countries are stored in the cover. Each adjustable country has an under-
lying reference location that the Astro times refer to. If your own location is far away from the
reference location, it may be useful to enter an Astro shift or neighbouring country.
Country
code
Country (reference location) Country
code
Country (reference location)
+49 Germany (Kassel) +48 Poland (Lodz)
+31 Netherlands (Utrecht) +7 Russia (Moscow)
+43 Austria (Liezen) +380 Ukraine (Kiev)
+32 Belgium (Brussels) +420 Czech Republic (Brno)
+34 Spain (Madrid) +39 Italy (Rome)
+47 Norway (Oslo) +33 France (Bourges)
+46 Sweden (Stockholm) +352 Luxemburg (Luxemburg)
+358 Finland (Helsinki) +86 China (Shanghai)
+44 United Kingdom (Manchester) +65 Singapore
5 Operation of Venetian blind and shutters
Moving the blind/shutter
￭ Press ƞ or Ɵ for longer than one second.
The blind/shutter moves in the desired direction to the end position or stops when the but-
ton is pressed again.
An arrow flashes in the display in the direction of travel.
If a ventilation position has been saved, the blind stops in the ventilation position when moving
down from the top end position (see Saving the ventilation position). Press Ɵ again to move
the blind/shutter to the lower end position.
Adjusting the slats
￭ Press ƞ or Ɵ for less than one second.
3 / 10
32596512 10865949 10.07.2018

System 3000
Blind timer and timer Display
Saving the ventilation position
To save and execute the ventilation position, the Venetian blind/shutter must be moved to the
upper end position until the flashing arrow switches off automatically.
￭ From the top end position press and hold down Ɵ.
The blind/shutter moves in the lower end position direction.
￭ Additionally press ƞ and hold it down.
The blind/shutter remains stopped, but continues to move after 4 seconds.
￭ As soon as the desired ventilation position has been reached, release both sensor but-
tons and press the ƞ button within the next 4 seconds.
The ventilation position is saved. The blind/shutter moves back to the upper end position.
If the ventilation position is saved again, the old value is overwritten.
6 Operation of lighting
Switch light
￭ Press button ƞ or Ɵ for less than 0.4 seconds.
With a dimming insert, the light switches to the brightness that was last set or a saved
brightness.
Switch light on with minimum brightness
￭ Press Ɵ for longer than 0.4 seconds.
Adjust the brightness
￭ Press ƞ or Ɵ for longer than 0.4 seconds.
Save switch-on brightness
￭ Adjust the brightness
￭ Press ƞ and Ɵ for longer than 4 seconds.
Switch-on brightness is saved.
For confirmation, the light is switched off briefly and switched on again.
Delete switch-on brightness
￭ Press Ɵ or ƞ briefly: light switches on at the saved switch-on brightness.
￭ Press ƞ and Ɵ for longer than 4 seconds.
The switch-on brightness has been deleted.
Switching on takes place at the last brightness value set.
For confirmation, the light is switched off briefly and switched on again.
7 Activate functions
Automatic operation/manual operation
Pressing Ƙ toggles between automatic operation and manual operation.
If all switching times are deactivated, the cover switches automatically to manual opera-
tion. Automatic mode cannot be activated.
Figure2: Automatic mode with Venetian blind or switching/dimming insert
4 / 10
32596512 10865949 10.07.2018

System 3000
Blind timer and timer Display
In automatic operation, "next" appears in the display and the time and type of the next action is
displayed. If the Astro function activated, ƚ also appears in the display.
Figure3: Manual operation
In manual operation, the current time and the icon Ƙ is displayed.
For switching/dimming inserts, the current switching state is additionally indicated. No switching
state is indicated on a 3-wire extension.
Programming menu overview
Figure4: Programming menu
Press ƣ to call up or exit the programming menu.
Navigate through the menu with ƞ or Ɵ and confirm the selection with ƨ.
ƗActivating/deactivating the disabling function
ƙChanging switching times
(for switching and dimming inserts also Ʀ)
ƚActivating/deactivating the Astro function and setting the Astro time shift
ƛƜ Setting date, time, country code (Ɲ) and automatic summer/winter time
changeover (Ơ).
Activating / deactivating the disabling function
The disabling function disables extension operation (for Venetian blind inserts only in direction
"AB") and deactivates automatic operation. This can be used, for example, as lock-out protec-
tion of French windows. Manual operation Ɵ is still possible. The operation of ƞ deactivates
the disabling function.
￭ƣ press.
Ɨ flashes in the display.
￭ƨ press.
5 / 10
32596512 10865949 10.07.2018

System 3000
Blind timer and timer Display
Yes flashes in the display.
￭ Changing to No with ƞ or Ɵ deactivates the disabling function.
￭ Confirm with ƨ.
The disabling function is active and the icon Ɨ appears in the display.
Pressing ƞ for more than 4 seconds also activates the disabling function in case of oper-
ation on a Venetian blind insert.
Saving switching times
￭ƣ press.
￭ Select ƙ (an additional second memory area Ʀ is available for switching and dimming
inserts).
￭ Confirm with ƨ.
Yes or No flashes in the display.
With switching and dimming inserts, it is possible to deactivate one or both of the memory
areas.
￭ Change selection with ƞ or Ɵ and confirm with ƨ.
The first switching time appears in the display.
The flashing switching time can be changed with ƞ or Ɵ and saved with ƨ. The up and down
time (on and off times with switching and dimming inserts) for Mo-Fr and Sa-So can be changed
successively. The menu is exited upon saving the last switching time.
To deactivate a switching time, set the clock - -:- - (between 23:59 and 00:00).
After one minute without any operation the menu is exited automatically without saving.
Activating/deactivating Astro function, Astro time shift
Astro times represent the sunrise and sunset times in the course of a calendar year. If you want
the switching to be executed early at the start of twilight or when it is first dark/light, this can
take place with the Astro time shift. The Astro time shift can be entered separately for sunrise
and sunset ranging from - 2 hours to + 2 hours.
The active Astro function only affects memory area ƙ. The times in memory area Ʀ are al-
ways executed at the programmed time.
￭ƣ press.
￭ Setting the ƚ
￭ Confirm with ƨ.
Yes flashes in the display.
Changing to No with ƞ or Ɵ deactivates the Astro function. The menu is exited. All saved
times are executed at the programmed time.
￭ Confirm with ƨ.
The time shift for the sunrise ơ flashes in the display.
￭ Change the value with ƞ or Ɵ and confirm with ƨ.
The time shift for the sunset Ƣ flashes in the display.
￭ Change the value with ƞ or Ɵ and confirm with ƨ.
The menu is exited. The Astro function is active and the Astro time shift is taken into con-
sideration during the calculation of the next switching time.
Information onprogramming the Astro function for blinds/shutters
The Astro function enables automatic opening of a blind/shutter when it gets light and automatic
closing when it gets dark. The programmed travelling times limit the travelling time of the blind/
shutter (figure 5). The programmed switching time in the morning is the earliest up time of the
blind/shutter and the switching time in the evening is the latest down time of the blind/shutter.
The Astro time is calculated once a week.
6 / 10
32596512 10865949 10.07.2018

System 3000
Blind timer and timer Display
Figure5: Default setting: Astro function for Venetian blind inserts
The Astro times for Germany are shown in (Figure 5). The blind/shutter is raised at sunrise, but
not before 7:00. In the evening at sunset, the blind/shutter is lowered, but not after 21:00.
When using the Astro function, the blind/shutter can raised in the morning and lowered in
the evening. Lowering the blind/shutter in the morning and raising the blind/shutter in the
evening is not possible in conjunction with Astro.
If the blind/shutter is to be moved manually in the morning or evening, the time - -:- - must
be set.
Information onprogramming the Astro function for lighting
The Astro function enables automatic switch-on of lighting when it gets dark and automatic
switch-off when it gets light. During the course of a year, the switching times are adjusted to the
changing sunrise and sunset times.
The Astro time is calculated once a week.
Figure6: Default setting: Astro function for switching and dimming inserts
7 / 10
32596512 10865949 10.07.2018

System 3000
Blind timer and timer Display
The Astro times for Germany are shown in figure (Figure 6). As default setting for mid-week and
the weekend, the lighting switches off in the morning at sunrise and switches on in the evening
at sunset. The programmed switch-off time in the morning is the latest switch-off time of the
lighting and the programmed switching time in the evening is the earliest switch-on time of the
lighting.
When using the Astro function, the lighting can be switched off in the morning and switched on
in the evening. Switching on in the morning and switching off in the evening is not possible in
conjunction with Astro. Memory area Ʀ is suitable for this.
If the lighting is to be switched manually in the morning or evening, the time - -:- - must be set.
Example for using memory area Ʀ
If the Astro function is activated, the switch-on times from memory area ƙ are moved to sunset
and the switch-off times to sunrise. The switching times in memory area Ʀ are not linked to
the Astro function. Additional switching operations can thus be carried out using memory area
Ʀ.
In the following example, external lighting should be switched on in the evening at sunset and
switched off in the morning at sunrise. However, the lighting should not be switched on the en-
tire night but instead be switched off between 23:00 and 4:30. Memory area Ʀ is required for
the additional switching operations in the night.
Figure7: Application example for memory areas ƙ and Ʀ
Set date and time
￭ƣ press.
￭ Setting the ƛƜ
￭ Confirm with ƨ.
The year flashes in the display.
￭ The setting of date, time, country code and automatic summer/winter time changeover
can be changed (see chapter Commissioning).
Saving current time as switching time, quick programming
Switching times can also be saved without calling up the programming menu. The current time
is saved as the switching time for Mo-Fr and Sa-So.
8 / 10
32596512 10865949 10.07.2018

System 3000
Blind timer and timer Display
The quick programming overwrites the existing up or down times for Venetian blind inserts. For
switching and dimming inserts, the on and off times of the memory area ƙ are overwritten.
Memory area Ʀ is deactivated.
￭ Press the required direction arrow ƞ for the up time/switch-on time or Ɵ for the down
time/switch-off time simultaneously with ƨ for longer than 1 second.
SAVE flashes in the display. The current time is saved as a new switching time.
Displaying current time permanently
The display switches off after 2 minutes without any operation. Alternatively, the indication of
the current time can also be activated.
￭ Press ƨ and Ƨ buttons simultaneously for longer than 10 seconds until the current time
appears.
The device has switched over to permanent indication of the current time
The time indication is deactivated again with the same operating step.
The current time is displayed briefly by pressing ƨ or Ƨ for longer than 1 second.
Resetting the cover to the default setting
￭ Press Ƨ and Ƙ simultaneously for 10 seconds.
A countdown runs in the display. The reset is performed with "0".
The default setting is restored. The year flashes in the display and the date and time must
be re-entered.
8 Information for electrically skilled persons
DANGER!
Mortal danger of electric shock
Disconnect the device. Cover up live parts.
Fitting the device
Switching, dimming or Venetian blind insert or 3-wire extension are mounted and connected
properly (see instructions of the relevant inserts).
￭ Fit the cover with frame on the insert.
￭ Switch on mains voltage.
The year flashes in the display. Date and time must be set (commissioning).
If Err appears in the display, the cover was previously connected to an insert of another unit. To
enable operation again, either place the cover onto the correct insert or press Ɵ and ƞ for
longer than 4 seconds.
If the unit is changed, all switching times are set to the default setting.
This device includes an integrated battery. At the end of its useful life, dispose of the
device together with the battery in accordance with the environmental regulations. Do
not throw device into household waste. Consult your local authorities about
environmentally friendly disposal. According to statutory provisions, the end consumer is
obligated to return the device.
9 Technical data
Ambient temperature -5 ... +45 °C
Storage/transport temperature -20 ... +70 °C
Accuracy per month ± 10 s
Power reserve approx. 4 h
9 / 10
32596512 10865949 10.07.2018

System 3000
Blind timer and timer Display
Data according to EN 60730-1
Action 1.B.S.T
Degree of soiling 2
Measured surge voltage 4000 V
10 Warranty
The warranty follows about the specialty store in between the legal framework as provided for
by law
Please submit or send faulty devices postage paid together with an error description to your re-
sponsible salesperson (specialist trade/installation company/electrical specialist trade). They will
forward the devices to the Gira Service Center. They will forward the devices to the Gira Service
Center.
Gira
Giersiepen GmbH & Co. KG
Elektro-Installations-
Systeme
Industriegebiet Mermbach
Dahlienstraße
42477 Radevormwald
Postfach 12 20
42461 Radevormwald
Deutschland
Tel [phone] - 602-0
Fax [phone] - 602-191
www.gira.de
[email protected]
10 / 10
32596512 10865949 10.07.2018