Global Fire Equipment Valkyrie AS Series User manual

Please note that this device is polarised.
MANUAL - 02/2018
MADE IN PORTUGAL - EU
TECHNICAL SPECIFICATIONS
GLOBAL FIRE EQUIPMENT S.A.
Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGAL
Tel: [phone] • Sales: [email protected] • Technical Support: t[email protected] • www.globalfire.pt
Valkyrie AS
Addressable Wall Sounder/Beacon
3
To next device
in loop or return
to panel
- Loop IN/ OUT
+ Loop IN/ OUT
1
4
NOTE: Address programmed on switches 1-5 has an OFFSET of 94. For example if
D.I.L. switches 1-5 are all set to OFF the actual sounder address, as read by the panel, will be 94.
SUPPLY VOLTAGE
LOOP CURRENT - QUIESCENT
LOOP CURRENT - SOUNDER/BEACON ACTIVE
MAXIMUM SOUNDER OUTPUT
CABLE SIZE
RESET/START-UP TIMES
PROTECTION CATEGORY
COLOUR / CASE MATERIAL
OPER. TEMPERATURE
MAX. HUMIDITY / PROTECTION
DIMENSIONS / WEIGHT
Loop Powered - 20 V to 30 V DC
550 uA max. with isolator
10 mA - 280 mW @ 28 V DC inc. isolator
100 dB (@ 1 meter - 30 V DC)
0.5-2.5 mm²
20 seconds max.
Type A - Indoor Use / Rating IP21C
White or Red / ABS and PC
o o
-10 C to 55 C
95% RH Non-Condensing / Type A - Indoor Use IP21C
110 (D) x 85 (H) mm inc. base / 254 g inc. base & 304 g inc. packaging
ORDER CODE DESCRIPTION| CERTIFICATE |
SOUNDER BASE - LOOP CONNECTIONS
1328-CPR-0286
1328-CPR-0286
1328-CPR-0286
1328-CPR-0286
1328-CPR-0286
1328-CPR-0286
1328-CPR-0286
1328-CPR-0286
ADDRESSABLE WALL SOUNDER-WHITE
ADDRESSABLE WALL SOUNDER-RED
ADDRESSABLE WALL SOUNDER-WHITE W/ LOOP ISOLATOR
ADDRESSABLE WALL SOUNDER-RED W/ LOOP ISOLATOR
ADDRESSABLE WALL SOUNDER/BEACON-WHITE
ADDRESSABLE WALL SOUNDER/BEACON-RED
ADDRESSABLE WALL SOUNDER/BEACON-WHITE W/ ISOLATOR
ADDRESSABLE WALL SOUNDER/BEACON-RED W/ ISOLATOR
VALKYRIE AS-WHITE
VALKYRIE AS-RED
VALKYRIE-ASI-WHITE
VALKYRIE-ASI-RED
VALKYRIE ASB-WHITE
VALKYRIE ASB-RED
VALKYRIE-ASBI-WHITE
VALKYRIE-ASBI-RED
- Loop IN/ OUT
- Loop IN/ OUT
Connection applicable only to:
VALKYRIE AS / VALKYRIE ASB
Connection applicable only to:
VALKYRIE ASI / VALKYRIE ASBI

ALTERNATING
HIGH-FREQUENCY TONE
2.7 Khz - 3.2 Khz
CONTINUOUS TONE
800 Hz
SWEEPING TONE
800-1000 Hz
ALTERNATING
LOW-FREQUENCY TONE
800-1000 Hz
OFF (0)
ON (1)
ON (1)
ON (1)
ON (1)
OFF (0)
OFF (0)
OFF (0)
SOUNDER/BEACON ADDRESS SETTINGS
BASE LOCK
MORE INFO >> WWW.GLOBALFIRE.PT
To lock sounder remove pin
available at terminal 4 on the
underside of the sounder using
a small screwdriver.
To unlock sounder from its base
push provided unlock key
through hole available on the
base side wall as shown.
1 2 3456 7 8
Address
Address Switches
2 ON = 2
3 ON = 4
4 ON = 8
5 ON = 16
1 ON = 1
Switches 1-5
used to configure address
in the range 94-125
Switch 6 and 7
Tone Selection
Switch8
Shadow Sounder
1 2 345678
ON (1)
OFF (0)
ON
OFF
D.I.L. SWITCHES CONFIGURATION
TONE SELECTION
Sounder Type
Switch No. 8
OFF = Shadow
ON = Normal
MECHANICAL SPECIFICATION
110 mm
85 mm
100 mm