Global Fire Equipment Valkyrie CB User manual

Instruction Manual V2 - 02/2013
FEATURES
Low current consumption 3 mA
Synchronization for fast activation
Compatible with most
conventional panels
Valkyrie CB
Conventional Wall
Mounted Beacon
EN54 Type A
Made in Portugal-EU
The VALKYRIE CB is a Wall mounted
Conventional Beacon. These units are
produced using the latest high intensity
LED technology and use extremely low
levels of current consumption providing a
highly visible flash.

SOUNDER BASE - LOOP CONNECTIONS
Please note that this device is polarised.
BASE LOCK
To lock beacon remove pin
available at terminal 4 on the
underside of the beacon
using a small screwdriver.
To unlock beacon from its
base push provided unlock
key through hole available on
the base side wall as shown.
Terminals
1. Negative Supply
2. Positive Supply - OUT
4. Positive Supply - IN
NOTE:
Only last device in Sounder Circuit
should have e.o.l.(end of line)
fitted across + and - terminals.
PANEL
Sounder
Circuit
IN
OUT
To next device
in Sounder Circuit
TECHNICAL SPECIFICATIONS
SUPPLY VOLTAGE
CURRENT - ALARM BEACON
MAX. CABLE SIZE
MAX. HUMIDITY
OPERATING TEMPERATURE
ENCLOSURE - MATERIAL
PROTECTION CATEGORY
DIMENSIONS
WEIGHT
20 V to 30 V DC
3 mA Max.
2.5 mm²
95% RH Non-Condensing
o o
-10 C to 55 C
Red / ABS
IP44
110 (D) x 49,5 (H) mm
150 g inc. beacon base - 180 g inc. packaging
ORDER CODE
VALKYRIE CONVENTIONAL BEACON
VALKYRIE CB
DESCRIPTION
GLOBAL FIRE EQUIPMENT S.A.
Sítio dos Barrabés, Armazém Nave Y, Caixa Postal 908-Z, 8150-016 São Brás de Alportel - PORTUGAL
Tel: [phone] • Sales: [email protected] • Technical Support: [e-mail] • www.globalfire.pt