GLP impression FRIO BAR User manual

User Manual
Software version V. 20

GLP® impression FR10 Bar User Manual – Revision A
This document covers fixture software version V. 20
© 2019 German Light Products GmbH. All rights reserved.
The marks ‘GLP’ and ‘German Light Products’ are trademarks registered as the property of German
Light Products GmbH in Germany, in the United States of America and in other countries.
The information contained in this document is subject to change without notice. German Light
Products GmbH and all affiliated companies disclaim liability for any injury, damage, direct or
indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to
use or reliance on the information contained in this document.
Manufacturer’s head office:
German Light Products GmbH (GLP), Industriestrasse 2, 76307 Karlsbad, Germany
Tel (Germany): [phone] - 0
Service & Support EMEA:
GLP, Industriestrasse 2, 76307 Karlsbad, Germany
Tel. (Germany): [phone]
Email: [email protected]
www.glp.de
Service & Support USA:
GLP USA, 1145 Arroyo St., Ste. A, 91340 San Fernando, California
Tel (USA): [phone]
Support (US): [email protected]
www.germanlightproducts.com

Table of Contents
1. Safety........................................................................................................... 4
Key to symbols....................................................................................... 4
GLP Service and Support..................................................................... 5
2. FR 10 Bar overview ..................................................................................... 6
3. Features....................................................................................................... 7
Tilt ............................................................................................................ 7
Intensity/Dimmer ................................................................................... 7
Shutter .................................................................................................... 7
Control/Settings channel..................................................................... 8
CTC ......................................................................................................... 8
Virtual color wheel................................................................................ 8
Zoom....................................................................................................... 8
Individual cell control ........................................................................... 9
Individual pixel control ......................................................................... 9
Individual zoom control........................................................................ 9
FX engine ............................................................................................... 9
Multi-layer concept .............................................................................. 9
Pattern control .................................................................................... 10
Pattern length and offset................................................................... 10
Crossfading.......................................................................................... 11
Transition .............................................................................................. 12
4. Control panel and display ...................................................................... 13
Control panel ...................................................................................... 13
Main screen......................................................................................... 14
Error code display ............................................................................... 15
Button Shortcuts .................................................................................. 15
Contents of the Quick Menu............................................................. 15
Main menus ......................................................................................... 16
5. Control menu layout ............................................................................... 24
Shortcut menu..................................................................................... 27
6. DMX control modes overview ................................................................ 28
7. DMX control channel layout................................................................... 33
DMX Mode 1: Normal (default DMX mode).................................... 34
DMX Mode 2: Multi-Layer................................................................... 41
DMX Mode 3: MultiPix Normal ........................................................... 52
DMX Mode 4: MultiPix Advanced..................................................... 56

www.glp.de
4 impression
FR10 Bar User Manual Rev. A
1. Safety
Key to symbols
The following symbols are used in this document:
Warning! Read the FR10 BAR Quick Start and Safety Manual supplied with
the fixture and available for download from www.glp.de before installing,
operating or servicing the fixture. The Quick Start and Safety Manual
contains important information for the safe use of FR10 BAR fixtures. If you fail
to read that information you may create a safety hazard with a risk of injury,
death or damage.
If you have any doubts or questions about how to use the GLP® impression FR10 BAR
lighting fixture safely, contact your GLP supplier for assistance. Your GLP supplier will be
happy to help.
The user documentation for impression FR10 BAR fixtures consists of three documents:
• The FR10 BAR Quick Start and Safety Manual, supplied with FR10 BAR fixtures and
available for download from www.glp.de. The Quick Start and Safety Manual
contains important safety information and installation instructions that the installer
and user must read. It also contains dimensions drawings and technical
specifications for the fixture.
• The FR10 BAR User Manual, available for download from www.glp.de. The User
Manual explains features and control of FR10 BAR fixtures.
• The FR10 BAR DMX Channel Index, available for download from www.glp.de. The
Channel Index is a separate document containing the DMX control channel layout
and DMX commands available in the fixture. This information is also included in the
User Manual.
The FR10 BAR is intended for use by experienced professionals with the knowledge and
skills to set up, operate, and maintain high-powered, remotely controlled lighting
equipment safely and efficiently. These operations require expertise that may not be
provided in this manual.
Warning! Safety hazard.
Risk of severe injury or
death.
Warning! Hazardous voltage.
Risk of lethal or severe
electric shock.
Warning! See user
manual for important
safety information.
Warning! Fire hazard.
Warning! Risk of eye
injury.

German Light Products®
impression FR10 Bar User Manual Rev. A 5
• Respect all warnings and directions given in the fixture’s user documentation and
on the fixture. Read the fixture’s Quick Start and Safety Manual and familiarize
yourself with the safety precautions it contains before installing, using or servicing
the fixture. GLP and affiliated companies will take no responsibility for damage or
injury resulting from disregard for the information in the user documentation.
• Check the GLP website at www.glp.de and make sure that you have the latest
versions of the fixture’s Quick Start and Safety Manual and this user manual.
• Check the fixture software version indicated on page 2 of this user manual and
then use the fixture’s control panel to check the version installed in the fixture. If the
versions are not the same, the user manual may still cover the fixture, because
software updates do not always affect the use of the fixture. However, it is possible
that this manual does not match the fixture perfectly. Software release notes can
help clarify this question. You can consult software release notes and download the
correct version of this user manual on the GLP website if necessary.
• Make both the Quick Start and Safety Manual and this user manual available to all
persons who will install, operate or service the fixture. Save both documents for
future reference.
• If you have any questions about the safe operation of the fixture, please contact
an authorized GLP distributor (see list of distributors at www.glp.de).
GLP Service and Support
Contact information for the nearest GLP Service and Support is available online at
www.glp.de/en/service, by email at [email protected], or by telephone at the following
numbers:
• GLP Germany: [phone]
• GLP N. America: [phone]
• GLP UK: [phone]
• GLP Asia: [phone]
• GLP Nordic: [phone]