Godox LEDP260C User manual

Instruction Manual

705-L260C0-07
Made in China

: 2
: 0755-29609320(8062) : 0755-25723423 : [e-mail]
godox.com
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen, China Tel: [phone](8062) Fax: [phone] E-mail: [email protected]
GODOX Photo Equipment Co., Ltd.
LED
LED VIDEO LIGHT

QCPASS




LEDP260C3300K~5600K







 


256DC
433MHz616






256
ON/OFF
+SET
STOP/RUN
CH/GR
DC






(16) 
(6)


LCD
-01- -02-
LCD



1.
LEDP260C2
 •:
2SONYNP-F970


LCD
LED
:
13~16.8V
DC
2
·
·

·
·

1

2


-03- -04-


1()
·DC
·ON/OFF
·STOP/RUN

·LCD
2/

·

3300K~5600K±300K

10%~100%

(LEDP260C)

·SET1;

3300K~5600K

(LEDP260C)
3
·433MHz

6LED16
LED
/
•CH/GR(A~F)
•CH/GR2(1~16)

LCD

-05- -06-

LED

DC




100%
(LUX)

TLCI





LEDP260C
7.4V(NP-F970)()
13-16.8V
30W
3300K~5600K±300K
16
6(ABCDEF)
2050(0.5/4500K)
2050(0.5/3300K)
2200(0.5/5600K)
95
94
3300K~5600K:10%~100%
5600K128
3300K128
-10~40
360mm*240mm*27mm
917g


LED*1*1*1

Foreword
For your safety
Thank you for purchasing this Godox Product!
This LEDP260C video light (color temperature 3300K~5600K) is excellent for
macrophotography, product shooting, photojournalistic and video recording, etc.
The LED Light provides high brightness, a wide spectrum, soft lightand accurate color
temperature.
Features:
● 256-LED-bulbs panel is lithium-ion or DC powered
● Wireless 433MHz grouping system (6 groups & 16 channels)
● Wirelessly adjust brightness or color temperature
● Include a remote control, a detachable handle and AC adapter
● Large-sized LCD panel. Settings auto saved
● Fits almost any occasions
Do not place in high temperature or high humidity conditions.
If this product overheats, it will cease operation and resume working after cooling
down. This is due to the built-in overtemperature protection.
Do not handle with wet hands, immerse in water, or expose to rain.
Observe precautions when handling batteries:
● Do not mix new and used batteries or batteries of different types.
● Do not put batteries into a fire or apply direct heat to it.
● Batteries are prone to leakage when fully discharged. To avoid damage to the
product, be sure to remove batteries out when the product will not be used for a
long time or when batteries run out of charge.
● Should liquid from batteries come into contact with skin or clothing, rinse
immediately with fresh water.
Body
Parts
256 LED Beads
Power Switch
Select Dial + SET Button
STOP/RUN Button
CH/GR Button
DC Power Jack
Lithium Battery Compartment
LCD Panel
Video Light Angle Knob
Light Stand
Locking Ring
Detachable
Handle Install Groove Detachable Handle
Battery Level Indicator
Channel (16) Controllable
Group (6)
Light
Brightness
Color
Temperature
LCD Panel
Detachable Handle Button
-07- -08-

Power Management
1. Power Supply
Two power supply modes are available:
• Using lithium battery: Put two SONY
NP-F970 model lithium batteries
(purchased separately) into the battery
compartment separately.
Note:
• When using lithium battery, the Battery Level Indicator is displayed on the LCD panel.
When the indicator blinks, the lithium battery power is low. Please recharge it
immediately before usage in order to avoid forceful auto off.
• Using DC power jack: This light can be
powered by DC power supply. Use a
13~16.8V adapter (included) to connect
the light with the DC power jack.
2、Installing Lithium Battery
• Turn the Power Switch off.
• Target the socket of the lithium battery
towards the “+” “-” contacts of the
Battery Compartment. Push the
battery in until it locks.
• Power the light on.
• After using the light, please power it
off.
Using the Video Light
1、By the Handle
• Install the Detachable Handle into the Handle Install Groove.
2、On the Light Stand
• Screw the Light Stand Locking Ring to the highest point and install the video light.
• Tighten the Light Stand Locking Ring.
What's in the Box of LEDP260C?
LED Video Light *1 AC Adapter *1Detachable Handle*1
- 09 - - 10 -

Operation
1、Before Usage
• Insert the lithium battery or connect the
light with the DC power supply.
• Switch the power on, the video light
giving out light.
• Press the STOP/RUN Button to light up
and shut down the LED lights.
• LCD panel shows the information.
2、Light Brightness/Color Temperature Adjustment
Adjusting Light Brightness
• Turn the select dial to adjust the light brightness.
Temperature
3300K~5600K ±300K
Light Brightness Range
10%~100%
Model
LEDP260C
Adjusting Color Temperature
• Press the SET button once and the color temperature icon blinks.
• Turn the select dial to adjust color temperature.
Color temperature range
3300K~5600K
Model
LEDP260C
3、Wireless Remote Control
• With 433 MHz wireless system, this product
has remote grouping and control function. Up
to 6 groups of LED light can be controlled. 16
channels are available with strong anti-
interference capability.
Please set the channels and groups of LED
video light to the same as those of remote
control before usage.
Adjusting Channel/Group of the LED Video Light
• Press the CH/GR button and the group icon blinks. Turn the select dial to choose
a group ID (A to F).
• Press the CH/GR button twice and the channel icon blinks. Turn the select dial to
choose a channel ID (1 to 16).
Note: The wireless signal can be received only when the LED light is power on.
LED Video Light
LED Video Light
Lithium Battery
DC Power Supply
Power
Color Temperature
Channel
Group
Brightness (LUX)
Color Rendering Index
TLCI
Light Brightness Range
LED Beads Quantity
Operation Temperature
Dimension
Net Weight
Technical Data:
* Product design and specifications are subject to change without notice.
Changeable Version LEDP260C
7.4V Lithium Battery (SONY NP-F970 model lithium battery)
13-16.8V
Max. 30W
3300K~5600K±300K
16
6 groups (A, B, C, D, E, F)
2050 (0.5 m/4500K)
2050 (0.5 m/3300K)
2200 (0.5 m/5600K)
>95
≥94
3300K~5600K: 10%~100%
5600K: 128
3300K: 128
-10~40°C
360mm*240mm*27mm
917g
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- 11 - - 12 -




  

  









()
()









 
 
 























() 




12
3
12

 0755-29609320-8062

Warranty
Dear customers, as this warranty card is an important certificate to apply for our
maintenance service, please fill in the following form in coordination with the seller
and safekeep it. Thank you!
Note: This form shall be sealed by the seller.
Applicable Products
The document applies to the products listed on the Product Maintenance lnformation
(see below for further information). Other products or accessories (e.g. promotional
items,giveaways and additional accessories attached,etc.) are notincluded in this
warranty scope.
Warranty Period
The warranty period of products and accessories isimplemented according to the
relevant Product Maintenancelnformation. The warranty period is calculated from the
day(purchase date) when the product is bought for the first time,And the purchase date
is considered as the date registered onthe warranty card when buying the product.
Product
Information
Model Product Code Number
Name Contact Number
Address
Customer
Information
Seller
Information
Note:
Name
Contact Number
Address
Date of Sale
If maintenance service is needed, you can directly contact the product distributor or
authorized service institutions. You can also contact the Godox after-sale service call
and we will offer you service. When applying for maintenance service, you should
provide valid wananty card. If you cannot provide valid warranty card, we may offer you
maintenance service once confirmed that the product or accessory is involved in the
maintenance scope, but that shall not be considered as our obligation.
The guarantee and service offered by this document are not applicable in the following
cases: . The product or accessory has expired its warranty period; . Breakage or
damage caused by inappropriate usage, maintenance or preservation, such as improper
packing, improper usage, improper plugging in/out external equipment, falling off or
squeezing by external force, contacting or exposing to the improper temperature,
solvent, acid, base, flooding and damp environments, etc; . Breakage or damage
caused by non-authorized institution or staff in the process of installation, maintenance,
alternation, addition and detachment; . The original identifying information of product
or accessory is modified, alternated, or removed; . No valid warranty card; .
Breakage or damage caused by using illegally authorized, nonstandard or non-public
released software; . Breakage or damage caused by force majeure or accident; .
Breakage or damage that could not be attributed to the product itself. Once met these
situations above, you should seek solutions from the related responsible parties and
Godox assumes no responsibility. The damage caused by parts, accessories and
software that beyond the warranty period or scope is not included in our maintenance
scope. The normal discoloration, abrasion and consumption are not the breakage within
the maintenance scope.
How to Get the Maintenance Service
Inapplicable Cases
Godox After-sale Service Call 0755-29609320-8062
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the
following Product Maintenance Information:
Product
Type
Parts
Other Items
Name
Circuit Board
Battery
Electrical parts e.g.battery
charger, power cord, sync cable,
etc.
Flash tube, modeling lamp, lamp
body, lamp cover, lockingdevice,
package, etc.
Maintenance
Period(month)
12
3
12
No
Warranty Service
Type
Customer sends
the product to
designated site
Without warranty
Customer sends
the product to
designated site
Customer sends
the product to
designated site