GPO PR100 User manual

PR100
V2 | JUNE 2018
USER MANUAL

2

3
CONTENT
English 5
German 19
French 33
Dutch 47
Spanish 61

4

55
ENGLISH

6
Important safety instructions
• Follow all instructions.
• Referallservicingtoqualiedservicepersonnel.
• Donotexposetheunittodrippingorsplashingandmakesure
thatnoobjectslledwithliquids,suchasvases,areplacedonit.
• Heat–Theapplianceshouldbeputawayfromheatsources
suchasradiators,heat,registers,stovesorotherappliances
(includingampliers)thatproduceheat.
• ClassIappliancesmustbeconnectedtothemainssocketoutlet
with a protective-earth connection.
• Themainsplugconnectsthedeviceandshouldremain
operableduringuse.
• Todisconnecttheunitfromthemains,theplugshouldbefully
disconnectedfromthemainssocketoutlet.Themainsplug
shouldnotbeobstructedandshouldbeeasilyaccessible
duringuse.
• Whenapowerindicatorlightison,itindicatestheunitis
connectedtothemainssupply.Whenthelightisoff,itindicates
theunitisfullydisconnectedfromthemainssupply.
• Contactmanufactureriftheunitissubjecttodamageorexhibits
adeclineinperformance.

7
What’s in the box
Checkandidentifythecontentsofyourpackage:
• Turntable PR100.
• 45RMPAdaptor(packedinplasticbag)1pc.
• Instruction Manual.
• RCAcable(toconnectwithmainunit)1pc.
• ACadaptor(100V~240V,50/60HZ)
forturntableonlytoconnectwithmainunit1pc.

8
Turntable Function keys
1. Hinge&TransparentCover 10.Start/Stop
2. Turntable 11.Pitchadjustment
3. Counterweight 12.Powerindicator
4. Counterweightindicator 13.BluetoothOn/Standby
5. Anti-skatingControl 14.StylusCartridge
6. Cuelever(Tonearmliftlever) 15.LineOutjacks
7. Tonearmholder 16.PhonoEQ/Thruon
8. SpeedSelector(33/45rpm) 17.ACadaptorjack(DC12V)
9. Tone Arm 18. Power on
45 RPM adaptor is packed with manual in separate plastic bag.
Placethe45RPMadapteroverthecentralspindlewhenplaying
45-RPMrecord.

9
1 2
3
5
4
6
7
8
9
10
11
12
13
14
15 16 17 18

10
Connection
• UsetheprovidedRCAcabletoconnectthephonolineoutjack(15)
&matchRed(R)&White(L)withmainunit(amplier)lineinjack.
• ConnectthesuppliedACadaptortotheDC12Vjack(17)
&pluginthepowersupply.
Precautions
- Ensure all connections are correct before plugging the unit into
powersupply.
- Pleaseread&followtheinstructioncarefullybeforeconnecting.
- BesuretoconnecttheACadaptoratthecorrectvoltage(AC100V~
240Hz,50/60Hz),Onlyusetheownpackageprovided.
- Wrongvoltagecouldcausere,shortcircuitorelectricshock.

11
SPEAKER
ConnectapairofspeakerswiththeunitviatheSPEAKERoutputR,L
jack(24)inrearpanelofMAINUNIT(Amplier).

12
TURNTABLE
INSTALL THE TURNTABLE
1.UnpackyourGPOPR100andremovetheplatterfromits
cardboardbox.
2.Ensurethattheelasticbandaroundtheinteriorrimoftheplatteris
nottwistedandthatitisushwiththeplatter’sbase.
3.Unpackthebaseunitandplaceitonaat,stablesurface.
4.Holdingtheplatterwiththeatsidedown,placeangerthroughone
ofthelargerholesandstretchtheelasticbandaroundthisnger
(seeimagebelowleft).
5.Holdingtheplatterwiththeatsideup,placeangerthroughthe
sameholeandstretchtheelasticbandaroundthisnger.Thiswill
helpyouattachittothedriveshaft.Holdthebandsecurelywithyour
ngerandthumb(seeimagebelowright).
6.Gentlylowertheplatterontothecentralspindleofthebaseunit,
ensuringthattheelasticbandisstretchedoverthedriveshaft.

13
7.Gentlyreleasetheelasticbandandremoveyourngerfromthe
hole.Thebandshouldnowbesecurelyattachedtothedriveshaft.
8. Remove the ties securing the tone arm.
9. Attach the counterweight to the tone arm. This counterweight can
betightenedorloosenedtoadjustthepressureonthestylus.
10.PlugthesuppliedACadaptorintothebaseunitandintoa
wallsocket.
11.UsetheprovidedRCAcabletoconnectthebaseunittothe
ampliers.
12.Placeavinylrecordontotheturntableandadjustthecounterweight
sothatthestylusappliesthecorrectamountofpressure.
13.TurntheunitonusingthePowerOn/Standbybutton.
14.SelectPHONOandthecorrectrecordspeed.
15.TurntheStart/StopselectortoStart.
16.Releasethetonearmholder,liftusingtheleverandmoveitto
yourpreferredlocationonthevinyl.
17.Gentlylowerthetonearmtobeginplayback.
17.Iftheturntabledoesnotspin,ensurethattheelasticbandis
correctlyattachedtothedriveshaftasshownintheimageabove.

14
PREPARING THE TURNTABLE PLAYER
1.Adjustanti-skatingdialtozero.
2.Rotatetonearmcounterweightfullyinananti-clockwisedirectionto
preventskating.
POWER SOURCE
ThisunitisdesignedtooperateonanormalAC100V~240V,50/60
Hzhouseholdpowersupply.Donotattempttooperatethesystem
usingotherpowersources.Thismayresultindamagetotheunitand
voidyourwarranty.

15
LISTENING TO RECORDS
1.Ensuretheunitisplacedonaatsurface.
2.Carefullyopentheturntablelid.
3.PressOn/Standbybuttononrearpanelofturntabletooperate.
TheBluetoothlightashesonbottomrightcornerofturntable.
4.SelectPHONO/EQTHRU‘On’(16)onrearofunit.
5.Placearecordonturntableoverthecentralspindle(Placethe45
RPMadapteroverthecentralspindlewhenplaying45-RPMvinyl).
6.SettheSpeedSelectorto33or45RPMaccordingtotherecord.
7.TurnSTART/STOPswitchtoSTART(10).
8.Releasethetonearmholder&removetheprotectivecapfrom
thestylus.
9.Liftthetonearmfromitsrestwiththetonearmliftlever(6).
10.Gentlylowerthetonearmtothebeginningoftherecord,ortothe
startofaparticulartrack.
Note–Whenthevinylnishesthetonearmwillautomaticallyliftfrom
thevinylandreturntothetonearmrest.Locktheholder.
TO FINISH
11.TurnSTART/STOPswitchtoSTOP(10).
12.Replacetheprotectivecaponthestylus.
13.Carefullyclosetheturntablelid.

16
BLUETOOTH PAIRING : TRANSMITTER
ThePR100includesaBluetoothTransmitterenablingtransmissionof
soundfromthePR100tootherBluetoothspeakers.
1.BeforePairing,switchontheBluetoothreceiverontheexternal
speakerandensureitsopenforpairing.
2.PressBluetoothbuttononPR100unit(13)andholdfortwo
seconds.
3.BluetoothPowerIndicatorLight(12)willashrapidlywhen
attempting to Pair.
4.Thislight(12)willlightconstantwhenthePR100unitispaired
successfullywiththeexternalspeaker.
5.PressBluetoothbutton(13)toexit.
PHONO
SelectPHONO/EQTHRUON(16)onrearofunitwhenamplierhas
no Phono inputs.
PITCH ADJUSTMENT
ThePITCHADJUSTfunction(11)enablesneadjustmentofthevinyl
playingspeedoncethecorrectRPM(33/45)ischosen.
TurnthePitchAdjustControltocarefullyincreaseordecreasethe
speedoftheturntableasrequired.

17
CARE FOR STYLUS
Pleasehandlethestyluswithcaretoavoiddamagetothevinylandto
maintainthesoundquality.
SPECIFICATIONS
Powersupply:AC100~240V50/60Hz.

1919
GERMAN

20
Wichtige Sicherheitshinweise
• Halten Sie alle Anweisungen ein.
• EinGeräteservicedarfnurvonbefugtenPersonen
vorgenommenwerden.
• SchützenSiedasGerätvorTropf-undSpritzwasser.MitWasser
gefüllteGegenstände,etwaVasen,dürfennichtaufdasGerät
gestelltwerden.
• Wärme–StellenSiedasGerätnichtinderNähevon
WärmequellenwieHeizkörpern,Heizregistern,Öfenoder
anderenwärmeerzeugendenGeräten(einschließlich
Verstärkern)auf.
• GerätederSchutzklasseImüssenübereinen
SchutzleiteranschlussandieNetzsteckdoseangeschlossen
werden.
• DerAnschlusserfolgtübereinenNetzstecker,denmanwährend
desBetriebsjederzeitziehenkönnenmuss.
• UmdasGerätvomStromnetzzutrennen,mussderStecker
ganzausderNetzsteckdosegezogenwerden.DerNetzstecker
darfnichtverdecktwerden;ermusswährenddesBetriebsleicht
erreichbar sein.
• WenndasGerätmitdemStromnetzverbundenist,leuchtetdie
Netzanzeigeauf.LeuchtetdieNetzanzeigenicht,bedeutetdies,
dassdasGerätvollständigvomNetzgetrenntwurde.
• WendenSiesichandenHersteller,wenndasGerätbeschädigt
odernichtvollleistungsfähigist.