Graham Field intensa 460 Series User manual

IN_460-INS-LAB-RevC23
460 SERIES EXAMINATION TABLE
INSTALLATION AND OPERATION MANUAL
SAVE THIS MANUAL FOR FUTURE USE.

CONTENTS
1 INTRODUCTION ............................................................................................................................. 3
INTENDED USE......................................................................................................................... 3
2 SAFETY PRECAUTIONS ................................................................................................................ 4
WARNINGS................................................................................................................................ 4
3 FEATURES ...................................................................................................................................... 6
EXAM TABLE COMPONENT IDENTIFICATION ...................................................................... 6
4 UNPACKING ................................................................................................................................... 7
UNPACKING THE EXAM TABLE............................................................................ 7
5 INSTALLATION ............................................................................................................................... 8
INSTALLATION ELECTRICAL REQUIREMENTS .................................................................... 8
ELECTROMAGNETIC INTERFERENCE .................................................................................. 8
LEVELING THE EXAM TABLE .................................................................................................. 8
6 OPERATION .................................................................................................................................... 9
OPERATION SAFETY................................................................................................................ 9
460 EXAM TABLE HIGH-LOW OPERATION.......................................................................... 10
EXAM TABLE HEIGHT RANGE .............................................................................................. 11
EXAM TABLE BACK ANGLE RANGE..................................................................................... 11
PHYSICIAN’S ASSIST STORAGE CABINET.......................................................................... 12
PATIENT LEGREST AND PROCEDURE TRAY ...................................................................... 12
PATIENT ASSIST ARM............................................................................................................ 13
STIRRUP OPERATION............................................................................................................ 13
PELVIC TILT OPERATION ....................................................................................................... 14
7 TROUBLESHOOTING................................................................................................................... 15
8 MAINTENANCE ............................................................................................................................ 16
CLEANING ............................................................................................................................... 16
MAINTENANCE ....................................................................................................................... 17
STORAGE ................................................................................................................................ 17
DISPOSAL................................................................................................................................ 17
9 CERTIFICATION............................................................................................................................ 18
10 SPECIFICATIONS ......................................................................................................................... 18
11 LIMITED WARRANTY................................................................................................................... 19
12 KEY TO SYMBOLS ....................................................................................................................... 20
13 APPENDIX..................................................................................................................................... 21
12 INDEX ............................................................................................................................................ 27
2
IN_460-INS-LAB-RevC23 www.intensa.net

1 INTRODUCTION
Congratulations on your purchase of the Intensa 460 Series Examination Table. The following
pages will provide you with important safety and operating instructions on the installation and
operation of the Examination Table, as well as maintenance and warranty information. Read this
manual carefully before operating your Examination Table and refer to it as often as needed.
Consult your authorized distributor and / or healthcare professional with any questions or
concerns regarding safe and eective techniques for operating your Examination Table.
This guide covers the use of the Intensa 460 Series Examination Table. Keep in mind that the
basic safety procedures included in this manual are to be used as a guide only. You may nd it
necessary to develop your own unique methods for safely utilizing the Examination Table. Again,
consult your healthcare professionals for their recommendations and never hesitate to ask for
their assistance.
Upon receipt of the Examination Table, inspect it closely to ensure that nothing is damaged,
there are no loose or broken parts, that all Examination Table parts are in the proper place, etc.
Immediately replace any worn or broken components. Your Examination Table should receive
maintenance on a regular schedule and should be inspected frequently for proper operation.
Contact Intensa Tech Support at 1.336.884.4096 with any maintenance concerns.
Info: Before attempting to install the Examination Table, refer to the section titled
“INSTALLATION” contained elsewhere in this manual. Contact Intensa Tech Support at
1.336.884.4096 or your Intensa authorized distributor if additional assistance is needed.
INTENDED USE
The Intensa 460 Series Examination Table is intended to support patients during medical
examinations. During these exams, medical professionals use adjusting mechanisms to
manipulate and position the table to provide patient support and closer examination of a portion
of or the entire patient.
Contraindications
Warning: This equipment is not suitable for use in the presence of high ammable
anesthetics or mixtures thereof and may result in serious injury or death.
Warning: This equipment is not suitable for use in the presence of a highly oxygenated
atmosphere and may result in serious injury or death.
Warning: When a cauterization or high frequency surgical device is being used, the patient
must be insulated from the metal table using a non-conductive material. Failure to do so
could result in electrical shocks or burns to the patient.
3
IN_460-INS-LAB-RevC23 www.intensa.net

2 SAFETY PRECAUTIONS
IMPORTANT: Before installing or using Examination Table, read and then follow the
following safety precautions and warnings. Failure to do so could result in serious personal
injury or damage to your Examination Table.
Always consult your healthcare professional to determine safe methods most suitable for
your individual abilities. Protect yourself, your attendant and Examination Table by having
it serviced regularly. If you experience any malfunction, contact Intensa Tech Support at
1.336.884.4096 or your Intensa authorized distributor immediately, as a hazardous condition could
result, causing personal injury or damage to your Examination Table.
Periodic inspection, adjustment and replacement of worn parts are necessary to provide years of
excellent service. Refer to CARE AND MAINTENANCE section of this manual.
Maintenance MUST be performed by qualied personnel ONLY.
Signicance of safety statements
Note the following special statements, used throughout this manual, and their signicance:
DANGER: Indicates a potential hazard situation or unsafe practice that, if not avoided, will
result in death or serious personal injury.
WARNING: Indicates a potential hazard situation or unsafe practice that, if not avoided,
could result in death or serious personal injury.
CAUTION: Indicates a potential hazard situation or unsafe practice that, if not avoided,
could result in minor or moderate personal injury.
sNOTICE: Indicates a potential hazard situation or unsafe practice that, if not avoided, could
result in product or property damage.
Info: Provides application recommendations or other useful information to ensure that you get
the most from your product.
WARNINGS
WARNING: Important! Read and understand these instructions before assembling or
using the Intensa 460 Series Examination Table. If you do not understand any part of these
warnings, cautions or instructions, contact a healthcare professional for direction in the
use of this product. If the Intensa 460 Series Examination Table is not properly assembled,
personal injury and damage to the 460 could result.
WARNING: If components are damaged or missing, contact your Intensa authorized
distributor immediately. DO NOT use substitute parts. Use only Intensa replacement parts.
The use of non-Intensa replacement parts could cause personal injury, property damage,
and void the warranty.
WARNING: Unauthorized modication of your Examination Table could cause personal
injury, property damage, and void the warranty.
WARNING: The Intensa 460 Series Examination Table maximum weight capacity is 600 lb
(272 kg), EVENLY DISTRIBUTED. DO NOT exceed the maximum weight capacity.
WARNING: GF Health Products, Inc. (“GF”) assumes no responsibility for any damage or
injury caused by improper assembly or use of this product.
4
IN_460-INS-LAB-RevC23 www.intensa.net

WARNING: Check all parts for shipping damage before using. In case of damage, DO NOT
USE the equipment. Contact the carrier or your Intensa authorized distributor for further
instructions.
WARNING: Unauthorized modication of the Examination Table or the use of non-Intensa
replacement parts may change the structure of the table and could create a hazardous
condition, which may result in serious injury and void the warranty.
WARNING: GF Health Products, Inc. specically disclaims responsibility for any bodily
injury or property damage which may occur during any use which does not comply with
federal, state or local laws or ordinances.
ELECTROMAGNETIC COMPATIBILITY (EMC) INFORMATION
WARNING: Medical Electrical Equipment needs special precautions regarding EMC and
needs to be installed and put into service according to the EMC information provided in
this manual.
WARNING: Electronic equipment may be inuenced by Radio Frequency (RFI). Caution
should be exercised with regard to the use of portable communications in the area around
such equipment. Portable RF communications equipment (including peripherals such as
antenna cables and external antennas) should be used no closer than 30 cm (12 inches)
to any part of the Intensa equipment including specied Intensa equipment cables.
Degradation of the performance of the Intensa equipment could result.
WARNING: If RFI causes erratic behavior, unplug the electric Intensa equipment
immediately. Leave unplugged while transmission is in progress.
WARNING: The use of accessories, transducers, and cables other than those specied by
the manufacturer may result in increased emissions or decreased immunity of the Intensa
equipment. GF cables and accessories include motor cables, mains cable, pendant cables,
and back up battery and cable.
WARNING: This equipment should not be used adjacent to or stacked with other
equipment. If adjacent or stacked use with other equipment is necessary, this Intensa
equipment and the other equipment should be observed to verify that they are operating
normally.
WARNING: The EMISSIONS characteristics of this equipment make it suitable for use in
industrial areas and hospitals (CISPR 11 class A). If it is used in a residential environment
(for which CISPR 11 class B is usually required) this equipment might not offer adequate
protection to radio frequency communication services. The user might need to take
mitigation measures, such as relocating or reorienting the equipment.
5
IN_460-INS-LAB-RevC23 www.intensa.net

3 FEATURES
EXAM TABLE COMPONENT IDENTIFICATION
Paper Roll Holder
Paper Cutter
Patient Assist Arms
Pelvic Tilt Bar
Patient Assist Arms
Storage
Rear Leveling Feet
Front Leveling Feet
Hand Control
H-Base
Legrest Pull-Out
Independent Procedure
Tray (foot pad does not
need to be removed to
access tray)
Physician Assist Drawer
with Magnetic Lock
Optional Foot Control
Serial Number
Product Identification
UL Label
Power Switch
Drawer Warmer Switch
Fuse Drawer with Spare Fuse
IEC Power Cord Inlet
6
IN_460-INS-LAB-RevC23 www.intensa.net

4 UNPACKING
UNPACKING THE EXAM TABLE
WARNING: Because of weight, we recommend placing the exam table on a hand truck for
transport to its installation location.
sNOTICE: DO NOT use a knife or other sharp object to open packaging — damage could
occur to the exam table upholstery or surface.
1. Check for any obvious damage to the carton or its contents. If damage is evident, notify the
carrier or your Intensa authorized distributor.
2. Carefully remove external strapping and boxing.
3. Carefully remove blocking from shipping pallet that secures exam table to pallet.
sNOTICE: DO NOT remove internal transport strapping from exam table until table is placed
in nal location; strapping will have labels denoting which straps should not be removed.
WARNING: Do Not Use Stirrups, Legrest Pull-Out, or Upholstery to lift, move or slide the
table. Personal injury and damage to exam table could occur.
4. Once exam table is located in nal position, remove internal transport strapping.
WARNING: This exam table, as shipped, could weight up to ~400 lb — use sufcient
personnel to lift and remove the exam table from the shipping pallet for placement into
nal location. DO NOT attempt to remove the exam table from the shipping pallet or move
it without assistance. Use proper lifting technique; neglect of these procedures could result
in serious injury.
5. Carefully remove the exam table from the shipping pallet.
7
IN_460-INS-LAB-RevC23 www.intensa.net

5 INSTALLATION
WARNING: Do Not Use Stirrups, Legrest Pull-Out, or Upholstery to lift, move or slide the
table. Personal injury and damage to exam table could occur. Lift only as described on
previous page.
INSTALLATION ELECTRICAL REQUIREMENTS
WARNING: Use 115 VAC, 60 Hz. Failure to do so may result in electrical shock and may
cause damage to the exam table.
WARNING: The power cord and table must be set up for easy access and use, with nothing
obstructing the table from being unplugged.
WARNING: This table must only be connected to a mains supply with protective earth.
WARNING: When connecting equipment to a courtesy outlet, this creates a “Medical
Electrical System” and which can result in a lowering of safety levels.
WARNING: No modications, any changes to this equipment could result in serious injury
or death.
ELECTROMAGNETIC INTERFERENCE
This product is designed and built to minimize electromagnetic interference with other devices. If
interference is noticed:
• Remove interfering device from the room.
• Plug exam table into an isolated circuit.
LEVELING THE EXAM TABLE
Tools required: 3/8" hex key
Leveling Screw Cap Leveling Screw
Exposed
Leveling Screw
Adjustment
1. Locate Leveling Screw Caps on H-Base Leveling Feet (4 Total) as shown at above left.
2. Remove all four Leveling Screw Caps by turning them counterclockwise. Leveling Screws will
now be exposed, as shown at above center.
3. Adjust all four Leveling Screws, as shown at right above, by using a 3/8” hex key to turn them
clockwise. STOP when each screw touches the oor.
4. Replace Leveling Screw Caps as shown at left above.
8
IN_460-INS-LAB-RevC23 www.intensa.net

6 OPERATION
OPERATION SAFETY
Exam Table Weight Capacity and Duty Cycle
WARNING: The Intensa 460 Series Examination Table maximum weight capacity is 600 lb
(272 kg), EVENLY DISTRIBUTED. DO NOT exceed the maximum weight capacity.
WARNING: The Intensa 460 Series Examination Table Duty Cycle is 10%, or two minutes of
use followed by eighteen minutes of non-use.
Personnel Clearance Safety
WARNING: Before each use of exam table, ensure personnel are clear of table. If personnel
are not clear before any exam table functions are set in motion, personal injury could
result.
WARNING: At lowest height, the top of the exam table is approximately 18 in. above the
oor, and the bottom of the Physician’s Assist Storage Cabinet is only 6 in. above the oor.
Feet and legs must be clear from this area before lowering exam table.
Equipment Clearance Safety
Ensure All Equipment is Clear of Table
WARNING: Before each use of exam table, ensure all equipment is clear of table. If
equipment is not clear before any exam table functions are set in motion, as shown above,
personal injury and damage to equipment could result.
WARNING: If a malfunction occurs, immediately
1. Remove hand from hand control or remove foot from foot control,
2. Unplug the exam table power cord, and
3. Assist patient in getting off the table.
WARNING: Neglect to adhere to these instructions could result in patient injury or damage
to the equipment
9
IN_460-INS-LAB-RevC23 www.intensa.net

460 EXAM TABLE HIGH-LOW OPERATION
The exam table will stop once it reaches maximum or minimum height, whether operated with
Hand Control Switch or Foot Control Switch.
Exam Table and Back Up and Down Using Hand Control
Return to Chair Positio
n
Lower the Back
Hand Control Functions
Lower the Table
Raise the Table Flat and
to the Highest Position
(for Emergency Flat Positions)
Raise the Back
Raise the Table
Exam Table and Back Up and Down Using Foot Control
Foot Control Functions
Lower
the Table
Raise
the Back Lower
the Back
Raise
the Table
Info: The Foot Control will Not Control “Table Flat” or “Chair Position” Functions
10
IN_460-INS-LAB-RevC23 www.intensa.net

EXAM TABLE HEIGHT RANGE
sNOTICE: This exam table is programmed with a limit switch. Once the table reaches its
maximum height or minimum height, vertical movements of the table will stop. The bed
height limit switch will activate if table requires more than 4 amps to raise.
Minimum Height
18.5 in. ± 0.5 in.
(47 cm ± 1.3 cm)
Height Range
Maximum Height
35.5 in. ± 0.5 in.
(90 cm ± 1.3 cm)
EXAM TABLE BACK ANGLE RANGE
WARNING: This exam table is maually operated. Once the back reaches its maximum
angle or a horizontal position, the back will stop moving. When the back is lowered, ensure
hands or other objects are clear from the downward motion area.
~ 75°
Back Angle Range
The exam table features a limited back angle of ~75° to accommodate heavier occupants
comfortably, as shown above.
11
IN_460-INS-LAB-RevC23 www.intensa.net

PHYSICIAN’S ASSIST STORAGE CABINET
sNOTICE: The drawer front can be used as a shelf. The maximum weight that can be
supported is 12 lb (5.4kg). The drawer front should not be lower than horizontal position; if
drawer front is lower than horizontal postion, do not use drawer front as a shelf.
The Physician’s Assist Storage Cabinet has the following features.
• Dimensions, W x D x H: 20 in. x 12 in. x 6 in. (50.8 cm x 30.5 cm x 15.2 cm)
• Opening, W x H: 18 in. x 5 in. (45.7 cm x 12.7 cm)
• Usable Shelf Space, W x D: 18 1/2 in. x 5 in. (47 cm x 12.7 cm)
• Magnetic Lock with 18 in. (45.7 cm) continuous hinge for extra shelf support
Physician’s Assist Shelf
(Drawer Front) Maximum
Weight Capacity 12 l
b (5.4 kg) —
Do Not Exceed
Physician’s Assist
Storage Cabinet
Physician’s Assist Storage Cabinet
PATIENT LEGREST AND PROCEDURE TRAY
Procedure Tray or
Treatment Pan Pull-Out
(Can be used without legrest
Pull-Out being extended)
Legrest Pull-Out Cushion
Legrest Pull-Out
Patient Legrest and Procedure Tray
The Legrest Pull-Out, shown above, is located under the seat portion of the table cushion and
can be extended 16 in. (41 cm). The Procedure Tray or Treatment Pan can be extended up to 13 in.
(33 cm) and can be used independently of the Legrest Pull-Out — the Legrest Pull-Out cushion
need not be removed to access the Procedure Tray.
12
IN_460-INS-LAB-RevC23 www.intensa.net

PATIENT ASSIST ARM
Forward Assist Arm Position
Outward Assist Arm Position Rear Assist Arm Position
Assist Arm
Refer to pictures above.
• Forward position is the normal Patient Assist Arm use position.
• Outward Position: Rotate Assist Arms 90 degrees outward by raising arms and turning them to
outward position. To return to forward position, rotate arms forward into brackets.
• Assist Arm Storage: Rotate Assist Arms to rear position or totally remove and store them in side
holes.
STIRRUP OPERATION
1
2
3
4
5
1
23
4
5
Stirrup Positions Stirrup Positions
Stirrup Operation
Stirrup Return is Position 1
WARNING: Ensure stirrups are locked in place before use. Stirrups will not support entire
patient weight.
1. Pull Stirrup straight out and unfold heel portion.
2. To move stirrups left and right, lift slightly and move to desired location as shown above.
3. Press down to lock stirrup into one of the available ve positions as shown above.
13
IN_460-INS-LAB-RevC23 www.intensa.net

PELVIC TILT OPERATION
Pelvic Tilt Down Position
Pelvic Tilt Up Position
1. Lift seat portion of upholstery to raise and lower pelvic tilt.
2. Once pelvic tilt is in desired position, lower the seat.
14
IN_460-INS-LAB-RevC23 www.intensa.net

7 TROUBLESHOOTING
If you have a problem with your Intensa exam table, contact Intensa Tech Support at
1.336.884.4096 for further information. Do not attempt to repair components or parts on your exam
table, as this may invalidate your warranty or cause further problems that may result in patient
injury. Stop using your exam table immediately if it is not functioning correctly.
WARNING: If you experience a problem with your exam table and are unable to service it
yourself, contact Intensa Tech Support at 1.336.884.4096.
15
IN_460-INS-LAB-RevC23 www.intensa.net

8 MAINTENANCE
sNOTICE — POSSIBLE EQUIPMENT DAMAGE HAZARD: Steam cleaning and pressure
washing of exam table is not recommended and may void warranty.
WARNING: Service and repair of the Intensa 460 Series Examination Table MUST be
performed by qualied personnel ONLY.
WARNING: Unauthorized modication of the Examination Table or the use of non-Intensa
replacement parts may change the structure of the table and could create a hazardous
condition, which may result in serious injury and void the warranty.
Info: For more detailed information, please contact GF Health Products, Inc. at 1.336.884.4096.
CLEANING
sNOTICE: DO NOT wash Examination Table under water pressure or steam clean.
sNOTICE: Cleaning solvents, dyes or sharp objects can damage upholstery. Promptly
remove any excess uids and rinse surface with clean water and wipe surface dry. Clean
your upholstered top weekly. For basic cleaning use mild soap and water, rinse thoroughly
and wipe surface dry.
Perform the following cleaning procedures as scheduled:
Component Cleaning Procedure Schedule Cleaning Agent * Special Notes
Pads Wipe with damp cloth
to remove any foreign
material
After each
use Routine hospital grade disinfectants,
soap and water
Use only
medium strength
cleaners
Do not steam
clean or
pressure wash
Exam table Wipe with damp cloth
to remove any foreign
material
After each
use Routine hospital grade disinfectants,
soap and water
Lubricate pivot
points after
cleaning
Electrical
components Wipe external surfaces ONLY with damp cloth
to remove any foreign
material
After each
use Routine hospital grade disinfectants,
soap and water
Use only
medium strength
cleaners
* Disinfecting and Cleaning Upholstery - ALWAYS follow manufacturer’s recommended dilution
Disinfectants
for vinyl
products
Phenolic disinfectants are the best choice for vinyl
Properly diluted quaternaries are also acceptable for vinyl
Quaternary / Isopropyl disinfectants ARE NOT recommended for vinyl
Disinfectants
for urethane
products
Quaternary disinfectants are recommended for urethane
Quaternary / Isopropyl disinfectants are recommended for urethane
Phenolics SHOULD BE AVOIDED on urethane
Disinfectants
for all
products
All fabrics may be cleaned with a 1:10 dilution of household bleaches containing
5.25% sodium hypochlorite as recommended by the Centers for Disease Control in
Atlanta, Georgia; there is no harmful effect on the fabric
Disinfectants applied at full concentration or in highly concentrated solutions will
decrease the useful life of fabric
Iodophor-type disinfectants used on fabric may result in staining
* Disinfecting and Cleaning Upholstery continued
16
IN_460-INS-LAB-RevC23 www.intensa.net

Soils or
Stains
Use neutral soapsuds and lukewarm water; DO NOT use harsh cleansers, solvents or
detergents
Hard-To-
Clean Spots
Use standard household / vinyl cleansers and a soft bristle brush on troublesome
spots or stains; presoak heavy, dried-on soil
Laundering Laundering Vinyl-laminated, Polyurethane-coated, or Rubber-coated fabric IS
NOT recommended; laundering may substantially decrease the useful life of the
fabric
MAINTENANCE
WARNING: The manufacturer will provide the appropriate circuit diagrams, component
parts lists, descriptions, and calibration instructions to assist qualied service personnel in
parts repair.
Have a qualied service technician perform the following maintenance as scheduled:
Maintenance Procedure Materials / Action Required Schedule
Inspect all mechanical functions for good
operation If replacement is needed, contact GF Health Products, Inc. at 1.336.884.4096
Every 3
months
Examine power cord for wear and function Examine for external wear, cuts, or wear.
If replacement is needed, contact GF
Health Products, Inc. at 1.336.884.4096
Inspect all fasteners to ensure proper t,
position and tightness (including nuts,
bolts, etc.)
Proper size wrench and screwdriver
Lubricate all moving and sliding parts and
hinge points Lubricating oil, light-duty grease, wax stick lubricant or Never-Seez lubricant
Inspect all surfaces and remove any sharp
or burred areas; apply touch-up paint
where required
Metal le, proper color paint (specify
color when ordering)
WARNING: After performing maintenance, if you believe a component or part is not
functioning properly, immediately contact Intensa Tech Support at 1.336.884.4096, as a
potentially hazardous condition could exist.
STORAGE
Store the repackaged Examination Table in a dry area.
DISPOSAL
WARNING: During normal use of this product, it could become contaminated and may
present a biohazard to waste sites.
This product may contain substances that could be harmful to the environment if disposed
of in places (landlls) that are not appropriate according to local legislation.
At the end of this product’s useful life, dispose of it in accordance with local requirements,
or contact the manufacturer for advice. Recycle this product through your recycling facility
or dispose of it in accordance with local regulations.
We recommend disassembling and dividing the equipment and components into different
waste groups such as: metal, cable, electronic, recoverable resource and plastic for
recycling or combustion. Most plastic components are provided with a plastic types code
and ber content to aid sorting of plastic parts.
17
IN_460-INS-LAB-RevC23 www.intensa.net

9 CERTIFICATION
Certication UL 60601.1
10 SPECIFICATIONS
Exam Table Load Rating (Evenly Distributed) 600 lb (272 kg)
Legrest Support Maximum Weight Capacity 50 lb (23 kg)
Patient Assist Arm Maximum Weight Capacity 100 lb (46 kg)
Table Height Range 18.5" to 35.5" ± .5" (47 cm to 90 cm ± 1.3 cm)
Back Angle Range 0° to ~75°
Upholstered Top Size (W x L) 27 in. x 60 in. (69 cm x 152 cm)
Upholstered Leg Support Pad Size (W x L) 18 in. x 19.5 in. (46 cm x 49.5 cm)
COM (Customer’s Own Material) Requirements 3 yd. (2.74 m)
Overall Exam Table Length 60 in. (152 cm)
Overall Exam Table Length with Leg Extension 73 in. (185 cm)
Drawer Size 3 Pass Through Drawers
(W x L x D) 18 in. x 20.5 in. x 4 in. (46 cm x 52 cm x 10 cm)
2 Storage Drawers
(W x L x D) 17 in. x 17.5 in. x 4 in. (43 cm x 44 cm x 10 cm)
Electrical
Requirements
Models 460, 460-AA,
460-DW, 460-DW-AA,
460-DW-PS-AA, 460-FL,
460-FS, 460-PS,
460-PS-AA, and
460-PS-DW
115-250 VAC
Drawer warmer (two ea) 120-240 VAC
Power Cord Length (from table) 90 in. (229 cm)
Specications 300V / 18AWG/ 3 Conductor / SJT Jacket
with Hospital Grade Plug or Detachable Power
Cord
Control Box Fuse Rating 4 Amp / 250 VAC Fast Blow
Foot Switch Ingress Against Liquid IPX-6
Drawer Warmer (optional) temperature Will heat area approximately 97°-99°
Paper Roll Sizes (W x Roll Diameter) 18 in. x 3 in. (46 cm x 8 cm)
19 in. x 3 in. (48 cm x 8 cm)
21 in. x 3 in. (53 cm x 8 cm)
Transport and
Storage Conditions
Temperature Range -20°F to 150°F (-29°C to 66°C)
Relative Humidity 10% to 90%
Operating
Conditions
Temperature Range 65°F to 85°F (18°C to 29°C)
Relative Humidity 10% to 90%
Fuses 10 Amp / 250 VAC Fast Blow
18
IN_460-INS-LAB-RevC23 www.intensa.net

11 LIMITED WARRANTY
SCOPE OF WARRANTY
Intensa, Inc. (“Intensa”) warrants to the original purchaser only that it will replace or repair components, at Intensa’s sole discretion,
that are defective in material or workmanship under normal use and service. All warranties are conditioned upon the proper use
of the products strictly in accordance with good commercial practice and applicable Intensa instructions and manuals, including
proper use and maintenance. To the extent that a third party warrants a component, Intensa conveys all of its rights under that
warranty to the original purchaser, to the extent permitted.
This limited warranty shall only apply to defects that are reported in accordance with the provisions set forth in this warranty
document, within the applicable warranty period and which, upon examination by Intensa or its authorized representative, prove to
be a warranty item. (See Obtaining Warranty Service below) This limited warranty is not transferable.
Within the guidelines set forth in this document, the warranted components and time periods are set forth below:
EXAMINATION TABLE COMPONENTS *
Base:.........................................................................................................5 years
Mechanical Components: ........................................................3 years
Electronic Components:............................................................2 years
Original and Replacement Upholstered Tops †:......1 year
Replacement Parts ‡:....................................................................90 days
* Labor is not included in the warranty.
† Upholstery is only warranted on material supplied by Intensa.
‡ The warranty period is as designated above. If a part is replaced under warranty, the original warranty period will not be
aected. All other replacement parts will be subject to the warranty period specied.
The applicable warranty period shall commence from date of shipment to the original customer, unless there is an expiration date
on the component in which case the warranty shall expire on the earlier of warranty period or the expiration date.
OBTAINING WARRANTY SERVICE
This limited warranty shall only apply to defects that are reported to the Distributor from whom the Customer purchased
the product within the applicable warranty period. If there is not a Distributor, you must contact Intensa directly by calling
1.336.884.4096, or by e-mailing a request to intensa@grahameld.com. Specic directions will be provided by the Customer
Service Representative. Failure to abide by the specic directions will result in denial of the warranty claim.
EXCLUSIONS
The warranty does not cover and Intensa shall not be liable for the following:
1) Defects, damage, or other conditions caused, in whole or in part, by misuse, abuse, negligence, alteration, accident, freight
damage, tampering or failure to seek and obtain repair or replacement in a timely manner;
2) Products which are not installed, used, or properly cleaned and maintained as required in the ocial manual for the applicable
product;
3) Products considered to be of a non-durable nature including, but not limited to: lters, fuses, gaskets, lubricants, and charts;
4) Accessories or parts not provided by Intensa;
5) Matching of color, grain or texture except to commercially acceptable standards;
6) Changes in color caused by natural or articial light:
7) Charges by anyone for adjustments, repairs, replacement parts, installation or other work performed upon or in connection with
such products which are not expressly authorized in writing, in advance, by Intensa;
8) Any labor or shipping charges incurred in the replacement part installation or repair;
9) Costs and expenses of regular maintenance and cleaning; and
10) Representations and warranties made by any person or entity other than Intensa.
ENTIRE WARRANTY, EXCLUSIVE REMEDY AND CONSEQUENTIAL DAMAGES DISCLAIMER
THIS WARRANTY IS INTENSA’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. INTENSA
MAKES NO IMPLIED WARRANTIES OF ANY KIND INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. IF ANY MODEL OR SAMPLE WAS SHOWN TO THE CUSTOMER, SUCH MODEL OR SAMPLE WAS
USED MERELY TO ILLUSTRATE THE GENERAL TYPE AND QUALITY OF THE PRODUCT AND NOT TO REPRESENT THAT THE
PRODUCT WOULD NECESSARILY CONFORM TO THE MODEL OR SAMPLE IN ALL RESPECTS. THIS WARRANTY IS LIMITED TO
THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PARTS. INTENSA SHALL NOT BE LIABLE FOR AND HEREBY DISCLAIMS
ANY DIRECT, SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED
TO: DAMAGES FOR LOSS OF PROFITS OR INCOME, LOSS OF USE, DOWNTIME, COVER, OR EMPLOYEE OR INDEPENDENT
CONTRACTOR WAGES, PAYMENTS AND BENEFITS. CERTAIN STATES MAY CONFER ADDITIONAL RIGHTS REGARDING
WARRANTIES AND IN THOSE STATES INTENSA’S LIABILITY AND THE LIABILITY OF INTENSA’S SUPPLIERS, SHALL BE LIMITED
TO THE FULLEST EXTENT PERMITTED BY LAW.
The warranties contained herein, together with Intensa’s current Terms and Conditions, contain all the representations
and warranties with respect to the subject matter of this document, and supersede all prior negotiations, agreements and
understandings with respect thereto. The recipient of this document hereby acknowledges and represents that it has not relied on
any representation, assertion, guarantee, warranty, collateral contract or other assurance, except those set out in this document.
For additional information on this product or this warranty, please contact an Intensa Customer Service Representative.
NOTES:
1) Additional terms and conditions may apply. See Intensa’s General Terms and Conditions on its website and the specic
warranties, which may accompany the specic product.
2) Freight claims must be notated on the appropriate shipping documents and must be made with immediacy. International,
federal and state regulations govern specic requirements for freight claims. Failure to abide by those regulations may result in
a denial of the freight claim. Intensa will assist you in ling the freight claim.
3) Claims for any short shipment must be made within three (3) days of the invoice date.
19
IN_460-INS-LAB-RevC23 www.intensa.net

12 KEY TO SYMBOLS
The following symbols are used on Intensa product labels.
Symbol Meaning
Protective Earth
Earth Ground
General Warning Sign
Shock Hazard
ETL
EC REP European Authorized
Representative
Disconnect before Service
MD Medical Device
Manufacturer
Keep Dry
Symbol Meaning
Fragile, Handle with Care
Electrical and Electronic
Equipment
Consult Instructions for Use
Caution
Pinch Point
UDI Unique Device Identier
Shipping Orientation
Maximum Weight Capacity 600 lb
(272 kg) Evenly Distributed
Duty Cycle -10% - 2 minutes of
use / 18 Minutes of non-use or
downtime
20
IN_460-INS-LAB-RevC23 www.intensa.net