Grandstream Networks GXV-3140 User manual

http://www.elastix.org
Grandstream GXV3140
and Elastix Server
Setup Guide
http://www.elastix.org
Grandstream GXV3140
and Elastix Server
Setup Guide
http://www.elastix.org
Grandstream GXV3140
and Elastix Server
Setup Guide

PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
2
1.0 Setup Diagram
Figure 1-1 is a setup diagram for a single IP Video Phone Grandstream GXV3140
configuration. The phone is setup as a SIP telephony device.
Figure 1-1. Setup Diagram
2.0 Host PC Environment
Table 2-1. Host Server Environment Details
Description
Hardware Type
Elastix Appliance ELX-Series
Hardware Version
ELX-3000
Software Type
Elastix
Software Version
2.3
3.0 Test Setup Equipment
Table 3-1. Test Setup Equipment
Equipment
Model
Version
Video Call IP (SIP) Phone
N/A
N/A
Grandstream
GXV3140
FW: 1.0.7.3 (HW: V0.4A)
Switch
N/A
N/A

PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
3
4.0 Setup Procedure
To set up the Elastix Server for the Grandstream GXV3140
1. Go to the web address of the Elastix Server Login page. The web address is
determined by the customer, for this guide we have used the IP address 192.168.1.75
2. On the Login page, type the username and password for an administrative user into
the Username and Password fields, see Figure 4-1. The username and password are
determined by the customer.
Figure 4-1. Login
3. Press Enter or click on the Submit button to go to Elastix’s Dashboard
4. Once inside, click on the PBX tab on the menu at the top of the screen
Figure 4-2. Dashboard
5. Click on the Submit button to add an extension, see Figure 4-3. This will take you to
the Add SIP Extension page, see Figure 4-4.

PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
4
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
•User Extension (301 in this example)
•Display Name (‘GrandstreamGXV3140’in this example)
•secret (‘h7Dka3Rf9si0t’in this example)
Figure 4-4. Add SIP Extension
8. Click on “Submit” button at the end of the page, and you will see a similar page on
Figure 4-5 displaying the “Apply Configuration Changes Here” pink ribbon on top of
the screen. Click on there to apply changes.
PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
4
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
•User Extension (301 in this example)
•Display Name (‘GrandstreamGXV3140’in this example)
•secret (‘h7Dka3Rf9si0t’in this example)
Figure 4-4. Add SIP Extension
8. Click on “Submit” button at the end of the page, and you will see a similar page on
Figure 4-5 displaying the “Apply Configuration Changes Here” pink ribbon on top of
the screen. Click on there to apply changes.
PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
4
Figure 4-3. Add an Extension
6. On the Add SIP Extension page (Figure 4-4), fill in the following information:
•User Extension (301 in this example)
•Display Name (‘GrandstreamGXV3140’in this example)
•secret (‘h7Dka3Rf9si0t’in this example)
Figure 4-4. Add SIP Extension
8. Click on “Submit” button at the end of the page, and you will see a similar page on
Figure 4-5 displaying the “Apply Configuration Changes Here” pink ribbon on top of
the screen. Click on there to apply changes.

PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
5
Figure 4-5
9. Now modify the extension by clicking on the name located at the right side, and set
the following parameters (Figure 4-7):
Device options
disallow: all
allow: ulaw&h264
Figure 4-7
ulaw is the audio codec, and h264 is the video codec.
10. Click on “Submit” and apply changes. With this you have just finished creating a
SIP extension that will be used by the Grandstream GXV3140 to register with the
Elastix Server. Repeat Steps 5 through 9 to similarly create another extension (different
values on Step 6) to be used by the Video IP (SIP) Phone to register as well (extension
302 in this example). Once you finished you will see something similar to Figure 4-8.
Figure 4-8
11. Now go to “PBX => Tools => Asterisk File Editor”, search for a file called
“sip_general_custom.conf” by clicking on “Show filter” button (Figure 4-9):
PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
5
Figure 4-5
9. Now modify the extension by clicking on the name located at the right side, and set
the following parameters (Figure 4-7):
Device options
disallow: all
allow: ulaw&h264
Figure 4-7
ulaw is the audio codec, and h264 is the video codec.
10. Click on “Submit” and apply changes. With this you have just finished creating a
SIP extension that will be used by the Grandstream GXV3140 to register with the
Elastix Server. Repeat Steps 5 through 9 to similarly create another extension (different
values on Step 6) to be used by the Video IP (SIP) Phone to register as well (extension
302 in this example). Once you finished you will see something similar to Figure 4-8.
Figure 4-8
11. Now go to “PBX => Tools => Asterisk File Editor”, search for a file called
“sip_general_custom.conf” by clicking on “Show filter” button (Figure 4-9):
PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
5
Figure 4-5
9. Now modify the extension by clicking on the name located at the right side, and set
the following parameters (Figure 4-7):
Device options
disallow: all
allow: ulaw&h264
Figure 4-7
ulaw is the audio codec, and h264 is the video codec.
10. Click on “Submit” and apply changes. With this you have just finished creating a
SIP extension that will be used by the Grandstream GXV3140 to register with the
Elastix Server. Repeat Steps 5 through 9 to similarly create another extension (different
values on Step 6) to be used by the Video IP (SIP) Phone to register as well (extension
302 in this example). Once you finished you will see something similar to Figure 4-8.
Figure 4-8
11. Now go to “PBX => Tools => Asterisk File Editor”, search for a file called
“sip_general_custom.conf” by clicking on “Show filter” button (Figure 4-9):

PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
6
Figure 4-9. Asterisk File Editor
12. Edit the file by adding the following information (Figure 4-10):
videosupport=yes
maxcallbitrate=384
allow=h261
allow=h263
allow=h263p
allow=h264
Figure 4-10. Editing “sip_general_custom.conf” file
13. When finish, click on “Save” and “Reload Asterisk” button.
14. With this you have finished configuring Elastix Server. Now we will set the
Grandstream GXV3140 phone.
15. You will need to enter the information from the extension created on the Elastix
Server into the Grandstream Phone.
For the initial configuration, refer to the Grandstream GXV3140 User Manual found at:
http://www.grandstream.com/products/ip-video-telephony/gxv3140/
Factory default settings
IP Addressing
DHCP
Web Access Username
admin
Web Access Password
admin
16.Log in to the Grandstream GXV3140 WebUI by pointing your browser to the
Grandstream Phone’s IP address.

PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
7
17. When prompted, enter the Web Access Username and Web Access Password to
access to the WebUI (Figure 4-11).
Figure 4-11 Grandstream WebUI
To register the Grandstream GXV3140 Phone we have two methods: Manual
Configuration and Autoprovisioning using Elastix’s Endpoint Configurator.

PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
8
MANUAL CONFIGURATION
1. Use the information from the Add SIP Extension page (Figure 4-4) to enter the
following necessary information on “Account 1“ section of the Grandstream Phone
WebUI (Figure 4-12):
Account Active: Checked
Account Name: TestPhone
SIP Server: Elastix Server’s IP Address (192.168.1.75 in this example)
SIP User ID: 301
Authenticate ID: 301
Authenticate Password: (‘h7Dka3Rf9si0t’ in this example)
Figure 4-12. Account 1
2. Once you have entered the required information, click on ‘Save’. Now go to “Call
Settings” and edit the Dialplan as follows (Figure 4-13):
Figure 4-13. Call settings
3. Click on “Save” button located at the end of the page. Now, reboot the device (Figure
4.14).

PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
9
Figure 4-14. Reboot
4. When the phone initialize, login to the WebUI again and go to “Status” section. You
should see your phone registered (Figure 4-15). If the phone is not registered, make sure
you’ve entered the correct information.
Figure 4-15. Status
3. Configure the other IP (SIP) Video Phone with the correct parameters.
4. To test the Grandstream GXV3140, pick up the previously configured IP (SIP) Video
Phone and call the GXV3140’s extension number (301 in this example). When the call
is established, speak into the phone and verify that the other IP (SIP) Video Phone can
hear your voice and see you through the video camera. Check this by calling from both
ends. This step completes the manual procedure.

PaloSanto Solutions
Grandstream GXV3140 and Elastix Server Setup Guide
10
AUTOPROVISIONING USING ELASTIX’S ENDPOINT
CONFIGURATOR
1. In the Grandstream GXV3140 WebUI, go to “Maintenance”section and clink on
“Upgrade”. Set the following parameters (Figure 4.16):
Upgrade Via: TFTP
Config Server Path: Elastix’s IP Address (192.168.1.75 in this example)
Figure 4.16 Advanced Settings
2. Click on “Save” button located at the end of the page. Now, in the Elastix WebUI
go to “PBX => Endpoint Configurator” (Figure 4-17).
Figure 4.17 Endpoint Configurator
3. Next to the “Discover Endpoints in this Network” button, type the address where
the phone is located and hit Enter (or click the button). This will generate a list with
all the phones available in that network (Figure 4-18).