GREAT PLAINS YP1630F-1630 User manual

Manufacturing, Inc.
www.greatplainsmfg.com
© Copyright 2012 Printed 2018-07-31 401-832M
EN
Table of Contents Index
Table of Contents Index
ORIGINAL INSTRUCTIONS
Operator Manual
YP1630F-1630 and YP1630F-1670
12 m 2-Section Yield-Pro®Dry Fertilizer Planters
Read the operator manual entirely. When you see this symbol, the
subsequent instructions and warnings are serious - follow without
exception. Your life and the lives of others depend on it!
Illustrations may show optional equipment not supplied with standard unit or
may depict similar YP1625/A or PD8070 models where a topic is identical.
34460

Machine Identification
Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new
manual.
If you or the dealer have added options not originally ordered with the machine, or removed options that were originally
ordered, the weights and measurements are no longer accurate for your machine. Update the record by adding the
machine weight and measurements with the option(s) weight and measurements.
Dealer Contact Information
Model Number
Serial Number
Machine Height
Machine Length
Machine Width
Machine Weight
Year of Construction
Delivery Date
First Operation
Accessories
Name:
Street:
City/State:
Telephone:
Email:
Dealer’s Customer
No.:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

YP1630F-1630 and YP1630F-1670 Cover Index Table of Contents
Great Plains | 401-832M | 2018-07-31 Cover Index iii
© Copyright 2012 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: AccuShot, Max-Chisel, Row-Pro,
Singulator Plus, Short Disk, Swath Command, Terra-Tine, Ultra-Chisel, and X-Press.
Registered Trademarks of Great Plains Manufacturing, Inc. include: Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone,
Nutri-Pro, Seed-Lok, Solid Stand, Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo-Max, Turbo-Till, Ultra-Till, Whirlfilter, and Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information.................................................1
Safety Decals ....................................................................6
Introduction...........................................................................15
Description of Unit ...........................................................15
Document Family.............................................................15
Covered Models ..............................................................15
Intended Usage ........................................................15
Using This Manual...........................................................15
Definitions.................................................................15
Owner Assistance............................................................16
Preparation and Setup .........................................................17
Initial Setup......................................................................17
Pre-Planting Setup ..........................................................17
Hitching Tractor to Planter...............................................18
Hydraulic Hookup .....................................................18
3-Point Hitch.............................................................18
Hydraulic Hose Hookup............................................19
Electrical Hookup .....................................................20
Store Main Parking Stand ........................................20
Monitor Setup ..................................................................21
Marker Setup (Option) .....................................................21
Operating Instructions .........................................................22
Pre-Start Checklist...........................................................22
Wing Lock Overview........................................................22
Unfolding the Planter .......................................................23
Prepare Hitched Tractor and Planter........................23
Prepare Transport Hooks .........................................23
Release Wing Locks.................................................24
Re-Phase Fold Cylinders .........................................24
Partially Unfold .........................................................24
Lower Tongue ..........................................................24
Fully Unfold ..............................................................24
Remove and Store Transport Locks.........................25
Unfold Closeout........................................................26
Raising/Lowering Planter.................................................27
Raising Planter .........................................................27
Lowering Planter ......................................................27
Re-phasing Lift System ............................................27
Folding the Planter ..........................................................28
Shut off Fan..............................................................28
Set Tractor and Tongue ...........................................28
Raise Planter............................................................28
Install Lock Channels ...............................................29
Activate Fold Solenoid Valves..................................29
Begin Folding ...........................................................29
Raise Tongue ...........................................................30
Complete Fold..........................................................30
Lower Tongue ..........................................................30
Re-phasing Fold System..........................................30
Lock Up Dry Fertilizer Drive .....................................30
Transporting ....................................................................31
Transport Weights....................................................31
Loading Materials ............................................................32
For Loading All Materials .........................................32
Loading Seed ...........................................................33
Seed Drive Clutch ....................................................34
Loading Fertilizer......................................................35
Loading Treatments (Option) ...................................38
Treatment Drive Clutch ............................................39
Disabling Unused Drives .................................................39
Wing Drive Lockup...................................................40
Fertilizer Drive Lockup .............................................40
Field Setup Checklist.......................................................40
Monitor Operation............................................................41
Fan General Operating Information.................................42
Starting Fan..............................................................42
Stopping Fan............................................................42
Marker Operation ............................................................42
Field Operation................................................................44
Parking ............................................................................45
Storage............................................................................46
Adjustments..........................................................................47
Setting Material Rates .....................................................48
Planting (Seed) Rate................................................48
Dry Fertilizer Rate ....................................................48
Treatment Rate (Option) ..........................................48
Marker Adjustments ........................................................49
Dual Marker Speed Adjustment ...............................49
Marker Disk Adjustment ...........................................49
Row Implement Adjustments...........................................50
Frame-Mounted Row Accessories ...........................50
Dry Fertilizer Applicator Adjustments .......................50
30 Series Row-Unit Adjustments.....................................51
Row Unit Down Pressure .........................................52
Unit-Mounted Coulter Adjustments ..........................53
Row-Unit Opener Disc Adjustments.........................53
Side Gauge Wheel Adjustments ..............................54
Adjusting Gauge Wheel Scrapers ............................55
Seed Meter Setup and Adjustment ..........................56
Exchanging Meters ..................................................57
Seed Meter Adjustments..........................................58
Seed Firmer Adjustments.........................................61

YP1630F-1630 and YP1630F-1670 Cover Index Table of Contents
Great Plains | 401-832M | 2018-07-31 Cover Index iv
Press Wheel Adjustments ........................................62
Troubleshooting ...................................................................64
Planting Rate Problems...................................................64
Seed Population Troubleshooting Charts........................65
Maintenance and Lubrication ..............................................71
Maintenance ....................................................................71
Frame Lift Cylinder Locks.........................................72
Ground Drive Springs...............................................72
Material Unloading and Clean-Out ..................................73
Seed Unloading and Clean-Out ...............................73
Fertilizer Unloading and Clean-Out ..........................75
Fertilizer Clean-Out ..................................................76
Treatment Unloading and Clean-Out (Option) .........80
Treatment Meter Gate Calibration (Option) .....................81
Meter Maintenance..........................................................82
Finger Pickup Meter Maintenance............................82
Exchanging Finger Sets ...........................................85
Meter Drive Adjustments ..........................................89
Brush Meter Maintenance ........................................90
Seed Plate Maintenance ..........................................91
Air Box Residue Clean-Out .............................................91
Bleeding Hydraulics..................................................93
Marker Maintenance........................................................94
Chain Maintenance..........................................................95
30 Series Opener Disks and Scrapers .....................96
30 Series Row-Unit Side Wheels .............................97
Lubrication .......................................................................98
Seed Lubricants.............................................................104
Options and Accessories...................................................105
Appendix A - Reference Information ................................111
Specifications and Capacities........................................111
YP1630F-1630 30 inch Models ..............................111
YP1630F-1670 70 cm Models................................112
Tire Inflation Chart .........................................................112
Hydraulic Diagrams .......................................................113
Chain Routing................................................................116
Torque Values Chart .....................................................120
Appendix C - Initial Setup ..................................................121
Hydraulic Charge and Bleed..........................................121
Seed Monitor Console Installation.................................121
Seed Monitor Console Quick-Start ................................121
Power-Up The Console ..........................................122
Set Metric Mode .....................................................122
About Row Count and Spacing ..............................122
Set Planter Row Count...........................................123
Set Planter Row Spacing .......................................123
Row Setup..............................................................123
Level Planter..................................................................124
Wing Alignment .............................................................125
Speed Calibration ..........................................................126
Speed Sensor Operation........................................126
Marker Extension...........................................................126
Appendix D - Option Installation .......................................127
122-278S Scraper Installation .......................................128
Warranty ........................................................................129

YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Great Plains | 401-832M | 2018-07-31 Table of Contents Index 1
Important Safety Information
Look for Safety Symbol
The SAFETY ALERT SYMBOL indicates there is a
potential hazard to personal safety involved and extra
safety precaution must be taken. When you see this
symbol, be alert and carefully read the message that
follows it. In addition to design and configuration of
equipment, hazard control and accident prevention are
dependent upon the awareness, concern, prudence and
proper training of personnel involved in the operation,
transport, maintenance and storage of equipment.
Be Aware of Signal Words
Signal words designate a degree or level of hazard
seriousness.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
This signal word is limited to the most extreme situations,
typically for machine components that, for functional
purposes, cannot be guarded.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury, and includes hazards that are exposed when
guards are removed. It may also be used to alert against
unsafe practices.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe
practices.
Prepare for Emergencies
Be prepared if a fire starts.
Keep a first aid kit and fire extinguisher handy.
Keep emergency numbers for doctor, ambulance, hospital
and fire department near phone.
Be Familiar with Safety Decals
Read and understand “Safety Decals” on page 6,
thoroughly.
Read all instructions noted on the decals.
Keep decals clean. Replace damaged, faded and illegible
decals.

Great Plains | 401-832M | 2018-07-31 Table of Contents Index 2
YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Wear Protective Equipment
Great Plains advises all users of chemical pesticides or
herbicides to use the following personal safety
equipment.
Waterproof, wide-brimmed hat.
Waterproof apron.
Face shield, goggles or full face respirator.
Goggles with side shields or a full face respirator is
required if handling or applying dusts, wettable powders,
or granules or if being exposed to spray mist.
Cartridge-type respirator approved for pesticide vapors
unless label specifies another type of respirator.
Waterproof, unlined gloves. Neoprene gloves are
recommended.
Cloth coveralls/outer clothing changed daily; waterproof
items if there is a chance of becoming wet with spray.
Waterproof boots or foot coverings.
Do not wear contaminated clothing. Wash protective
clothing and equipment with soap and water after each
use. Personal clothing must be laundered separately from
household articles.
Clothing contaminated with certain pesticides must be
destroyed according to state and local regulations. Read
chemical label for specific instructions.
Wear clothing and equipment appropriate for the job.
Avoid loose-fitting clothing.
Prolonged exposure to loud noise can cause hearing
impairment or loss. Wear suitable hearing protection such
as earmuffs or earplugs.
Avoid wearing entertainment headphones while operating
machinery. Operating equipment safely requires the full
attention of the operator.
Avoid High Pressure Fluids
Escaping fluid under pressure can penetrate the skin,
causing serious injury.
Avoid the hazard by relieving pressure before
disconnecting hydraulic lines.
Use a piece of paper or cardboard, NOT BODY PARTS, to
check for suspected leaks.
Wear protective gloves and safety glasses or goggles when
working with hydraulic systems.
If an accident occurs, seek immediate medical assistance
from a physician familiar with this type of injury.

YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Great Plains | 401-832M | 2018-07-31 Table of Contents Index 3
Handle Chemicals Properly
Read and follow chemical manufacturer’s instructions.
Wear protective clothing.
Handle all chemicals with care.
Agricultural chemicals can be dangerous. Improper use
can seriously injure persons, animals, plants, soil and
property.
Inhaling smoke from any type of chemical fire is a serious
health hazard.
Store or dispose of unused chemicals as specified by the
chemical manufacturer.
Immediately and thoroughly flush any area of the body
that is contaminated by chemicals.
If chemical is swallowed, carefully follow the chemical
manufacturer’s recommendations and consult with a
doctor.
If persons are exposed to a chemical in a way that could
affect their health, consult a doctor immediately with the
chemical label or container in hand. Any delay could
cause serious illness or death.
Dispose of empty chemical containers properly. By law
rinsing of the used chemical container must be repeated
three times. Puncture the container to prevent future use.
An alternative is to jet-rinse or pressure rinse the
container.
After working with chemicals, wash hands and face before
eating. Shower when application is completed for the day.
Never wash out the tanks within 30m (100 feet) of any
freshwater source or in a car wash.
Rinse out the tank. Apply rinse water on last field treated.
Keep Riders Off Machinery
Riders obstruct the operator’s view. Riders could be
struck by foreign objects or thrown from the machine.
Never allow children to operate equipment.
Keep all bystanders away from machine during operation.
Use Safety Lights and Devices
Slow-moving tractors and towed implements can create
a hazard when driven on public roads. They are difficult
to see, especially at night.
Use flashing warning lights and turn signals whenever
driving on public roads.
Use lights and devices provided with implement.

Great Plains | 401-832M | 2018-07-31 Table of Contents Index 4
YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Transport Machinery Safely
Maximum transport speed for implement is 32 km/h
(20 mph). Some rough terrains require a slower speed.
Sudden braking can cause a towed load to swerve and
upset.
Do not exceed 32 km/h (20 mph). Never travel speeds
which do not allow adequate control of steering and
stopping. Reduce speed if towed load is not equipped with
brakes.
Comply with state and local laws.
Do not tow an implement that, when fully loaded, weighs
more than 1.5 times the weight of towing vehicle.
Carry reflectors or flags to mark planter in case of
breakdown on the road.
Keep clear of overhead power lines and other
obstructions when transporting. Refer to transport
dimensions under “Specifications and Capacities” on
page 111.
Do not fold or unfold the planter while the tractor is
moving.
Shutdown and Storage
Lower planter, put tractor in park, turn off engine, and
remove the key.
Block tires with wheel chocks provided.
Secure planter using blocks and supports provided.
Detach and store planter in an area where children
normally do not play.
Tire Safety
Tire changing can be dangerous and should be
performed by trained personnel using correct tools and
equipment.
When inflating tires, use a clip-on chuck and extension
hose long enough for you to stand to one side–not in front
of or over tire assembly. Use a safety cage if available.
When removing and installing wheels, use wheel-handling
equipment adequate for weight involved.

YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Great Plains | 401-832M | 2018-07-31 Table of Contents Index 5
Practice Safe Maintenance
Understand procedure before doing work. Use proper
tools and equipment. Refer to this manual for additional
information.
Work in a clean, dry area.
Lower the planter, put tractor in park, turn off engine, and
remove key before performing maintenance.
Make sure all moving parts have stopped and all system
pressure is relieved.
Allow planter to cool completely.
Disconnect battery ground cable (-) before servicing or
adjusting electrical systems or before welding on planter.
Inspect all parts. Make sure parts are in good condition
and installed properly.
Remove buildup of grease, oil or debris.
Remove all tools and unused parts from planter before
operation.
Safety At All Times
Thoroughly read and understand the instructions in this
manual before operation. Read all instructions noted on
the safety decals.
Be familiar with all planter functions.
Operate machinery from the driver’s seat only.
Do not leave planter unattended with tractor engine
running.
Do not dismount a moving tractor. Dismounting a moving
tractor could cause serious injury or death.
Do not stand between the tractor and planter during
hitching.
Keep hands, feet and clothing away from power-driven
parts.
Wear snug-fitting clothing to avoid entanglement with
moving parts.
Watch out for wires, trees, etc., when folding and raising
planter. Make sure all persons are clear of working area.

Great Plains | 401-832M | 2018-07-31 Table of Contents Index 6
YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
Read and follow decal directions.
Keep lights in operating condition.
Keep all safety decals clean and legible.
Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
When ordering new parts or components, also request
corresponding safety decals.
818-055C
Slow Moving Vehicle Reflector
On the back of the planter, walkboard center;
1 total
See “Transporting” on page 31.
838-266C
Red Reflectors
On the back of fertilizer hopper frame each end,
and on the inside rear face of each light mounting bar;
4 total
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
34535
34535

YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Great Plains | 401-832M | 2018-07-31 Table of Contents Index 7
838-265C
Amber Reflectors
One each on rear face of wing tool bar at wing lock,
one each rear outside corner face of fertilizer frame;
4 total
838-267C
Daytime Reflectors
On the back of seed frame, outside red reflectors,
on the rear face of the light bar;
2 total
34536
34537
34535

Great Plains | 401-832M | 2018-07-31 Table of Contents Index 8
YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
818-323C (Option)
Danger: Chemical Hazard
On the rear walkboard face of the central dry fertilizer
hopper, and on the underside of treatment hopper
(option) lids;
1 or 17 total
818-590C
Danger: Crushing Hazard
On the left side of the 3-point hitch:
1 total.
See “Hitching Tractor to Planter” on page 18.
34539
34544
34541

YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Great Plains | 401-832M | 2018-07-31 Table of Contents Index 9
838-599C
Danger: Electrocution Hazard
On front face of marker mount, near gauge wheel pivot;
2 total
See “Marker Operation” on page 42.
848-583C
Danger: Do Not Ride
On the left and right ends of the walkboard frame;
2 total
818-045C
Warning: Pinch-Crush
On both sides of wing gauge wheel caster weldments;
4 total
34542
34536
34540

Great Plains | 401-832M | 2018-07-31 Table of Contents Index 10
YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
818-188C
Warning: Excessive Speed
On left side of tongue near hitch;
1 total
See “Transporting” on page 31.
818-339C
Warning: High Pressure Fluid Hazard
On left side of tongue near hitch;
1 total
See “Hydraulic Hose Hookup” on page 19.
818-579C
Warning: Pinch-Shear Hazard
On marker section each end, two total
See “Marker Operation” on page 42.
818-580C
Warning: Overhead Hazard
On marker section each end, two total
See “Marker Operation” on page 42.
34541
818-188C Rev. C
Do Not exceed 20 mph maximum transport
speed. Loss of vehicle control and/or machine
can result.
To Prevent SeriousInjury or Death:
EXCESSIVE SPEED HAZARD
WARNING
34541
34543
34543

YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Great Plains | 401-832M | 2018-07-31 Table of Contents Index 11
818-628C
Warning: Confined Space
On the rear walkboard face of the central dry fertilizer
hopper;
1 total
818-632C
Warning: Fan Hazard
On center rear face of walkboard frame;
1 total
818-860C
Warning: Moving Parts
On outer face of central hopper lower support tubes,
on variable rate gearbox input chain guards,
on all ground drive arm guards
on all removable ground drive guards;
14 total
34544
34535
34536
34545
34546

Great Plains | 401-832M | 2018-07-31 Table of Contents Index 12
YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
848-392C
Warning: Eye and Dust Hazards
On the rear walkboard face of the central dry fertilizer
hopper;
1 total
848-575C
Warning: Falling Hazard
On the left and right ends of the walkboard frame;
2 total
848-576C
Warning: Moving Parts
On inlet of fertilizer meter, above final range gears;
1 total
34544
34536
34410

YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
Great Plains | 401-832M | 2018-07-31 Table of Contents Index 13
818-398C
Caution: Tires Not A Step
On both sides of wing gauge wheel caster weldments,
and on rear outer corners of central hopper frame;
4 total
In transport configuration, wing gauge wheels are off the
ground and free to spin. In field configuration, at higher
row unit down-forces, wing gauge wheels may have little
or no ground traction.
818-578C
Caution: Tire Pressure
On hubcap side rim of each gauge wheel;
2 total
34536
34540
34547
818-578C
Maximum inflation pressure of tiresis65 psi.
To r que wheel boltsto 240 lb-ft.
To Avoid Injury or Machine Damage from improper Tire
Inflation or Torquing of Wheel Bolts:
CAUTION

Great Plains | 401-832M | 2018-07-31 Table of Contents Index 14
YP1630F-1630 and YP1630F-1670 Table of Contents Index Important Safety Information
838-995C
Caution: General
On right side of tongue near hitch;
1 total
858-011C
Warning: Tire Pressure
On outside rim of each main transport wheel;
2 total
34541
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Read Owner’s Manual before usingmachine.
Stand clear when foldingand unfoldingmarkers.
Stand clear when raisingand loweringmachine.
Keep all safety shieldsand devicesin place.
Keep hands, feet, and clothingaway from
Never ride on machine.
Alwayslower or properly support machine
Escapinghydraulic fluid can cause serious
Review safety instructionswith all operators
movingchainsand sprockets.
BEFORE servicing.
818-587C Rev. B
injury.
annually.
CAUTION
34548
To Avoid Injury or Machine Damage from Improper Tire
Inflation or Torquingof Wheel Bolts:
Maximum inflation pressure of tiresis49 psi (338 kPa).
Torque wheel boltsto 315 ft-lb (427 N-m).
858-011C
CAUTION

YP1630F-1630 and YP1630F-1670 Table of Contents Index Introduction
Great Plains | 401-832M | 2018-07-31 Table of Contents Index 15
Introduction
Great Plains welcomes you to its growing family of new
product owners. This planter has been designed with
care and built by skilled workers using quality materials.
Proper setup, maintenance, and safe operating practices
will help you get years of satisfactory use.
Description of Unit
The YP1630F 12 m 2-Section Yield-Pro®
Dry Fertilizer Planters are pull-type planting implements
for use in conventional till, minimum-till, or light no-till
conditions.
Yield-Pro®Planters have 30 Series, side-depth-control
row-units, finger pickup or brush seed meters and row
seed hoppers. Dry fertilizer is air-delivered from a central
bulk hopper. Optional treatment hoppers are available for
rows. Optional unit-mounted coulters are suitable for light
to moderate no-till conditions only. The planter folds for
4.0 m (Narrow) or 4.2 m (Wide) transport.
Document Family
Covered Models
Intended Usage
Use the planter to seed production-agriculture crops
only. Do not modify the planter for use with attachments
other than Great Plains options and accessories
specified for use with the planter.
Using This Manual
This manual familiarizes you with safety, assembly,
operation, adjustments, troubleshooting and
maintenance. Read it and follow the recommendations to
help ensure safe and efficient operation.
The information in this manual is current at printing.
Some parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
Economic and/or Liability Risks:
A crucial point of information related to the preceding topic.
Read and follow the directions provided before continuing, to
ensure safety, avoidance of machine damage, and to achieve
desired field results.
This format indicates a useful point of information
related to the preceding topic.
Figure 1
Left/Right Convention
34460
R
L
401-832M Operator Manual (this manual)
401-832B Seed Rate Manual
401-832P Parts Manual
11001-1372a
a. These are supplier part numbers.
DICKEY-john®PM400 Console Manual
Bulletin A-27aDwyer Magnehelic®instructions
All Models are 16 Row
YP1630F-1630ND 30 inch, Narrow, Dual row hoppers
YP1630F-1630NS 30 inch, Narrow, Single row hopper
YP1630F-1630WD 30 inch, Wide, Dual row hopper
YP1630F-1630WS 30 inch, Wide, Single row hopper
YP1630F-1670ND 70 cm, Narrow, Dual row hopper
YP1630F-1670NS 70 cm, Narrow, Single row hopper
YP1630F-1670WD 70 cm, Wide, Dual row hopper
YP1630F-1670WS 70 cm, Wide, Single row hopper
U
D
F
B
L
R

Great Plains | 401-832M | 2018-07-31 Table of Contents Index 16
YP1630F-1630 and YP1630F-1670 Table of Contents Index Introduction
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts, and equipment specially designed for Great Plains
products.
Refer to Figure 2
Your planter’s parts were specially designed and should
only be replaced with Great Plains parts. Always use the
serial and model number when ordering parts from your
Great Plains dealer. The serial-number plate is located
near the right main transport tire, on the rear face of the
right riser of the front frame weldment.
Record your Planter model and serial number here for
quick reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2. If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
Figure 2
Serial Number Plate
34535