Green Bike USA GB5 User manual

GREEN BIKE USA
Quick Start Guide Model GB5
Thank you for buying your new electric bike from us.
Please use this quick start guide to ensure that you will get the most from your new
purchase.
handle bar
handle bar folding
mechanism
frame folding
mechanism
seat quick fit
mechanism
key
LCD display
USB outlet
Green Bike USA
6601 Lyons RD • Suite G7
Coconut Creek, FL 33073
Phone [phone] • Email: [e-mail]

1. If your box came damaged please take pictures on your phone and let us know
right away. Please take the bike, the seat and the charger out of the box. Put
away the protective materials around the bike and keep the box for now.
2. Unfold the frame and the handle bar. Make sure that the quick folding
mechanisms of the handle bar and the frame are closed tightly.
3. The bikes come assembled, the only thing that you need to do is to insert the
seat into the seat bar, make sure it's inserted to at least the minimum
length, which is marked on the seat bar. Adjust the seat quick fit mechanism
by turning the bolt until it's tight.
4. Please check tires pressure. We recommend 50 psi.
5. Turn the battery ON by inserting the key to the battery and turning it all the
way clockwise to the
ON position (at this position you can't take out the key
from the battery). Press the
MODE button and start the display. Next hold
both
UP and DOWN buttons at the same time for 3 seconds, the LCD will
enter into setting state.
6. Time Setting
After entering into the setting state, first set the HOUR by using UP and
DOWN. Press MODE for confirmation and then set the MINUTE by using
UP and DOWN . Press MODE for confirmation and then set the top riding
speed.
7. Top Speed Setting
Make sure that it says 40, if it's not you can use the UP and DOWN buttons
to adjust. Press
MODE for confirmation and enter the display unit setting.
8. Display Units
Press UP and DOWN to choose the display unit. The unit could be MPH or
Km/h. The range units is changing accordingly with the speed unit MILE or
KM. Press
MODE for confirmation and enter the wheel size settings.
9. Wheel Size Settings
Make sure that it says 20, if it's not you can use the UP and DOWN buttons
to adjust. Press
MODE for confirmation and enter the backlight brightness
settings.
10.Backlight Brightness Settings
Press UP and DOWN to change the backlight brightness. You can choose
from level 1 to level 3. Level 1 is the minimum brightness and the preferable
choice.
Green Bike USA
6601 Lyons RD • Suite G7
Coconut Creek, FL 33073
Phone [phone] • Email: [e-mail]

11.Exit Settings
Short press MODE (within 2 seconds) will change to the next parameter that
you can change. Hold
MODE (more than 2 seconds) to save the current
settings and exit the settings interface.
12.Lights
To turn on the front and back light just press both the MODE and UP
buttons.
Green Bike USA
6601 Lyons RD • Suite G7
Coconut Creek, FL 33073
Phone [phone] • Email: [e-mail]