Greenbroz M Dry Trimmer User manual

MODEL M DRY TRIMMER
TRUE TO THE CROP
User Manual
GreenBroz.com

844.DRY.TRIM | [e-mail] | greenbroz.com
FAILURE TO COMPLY WITH THE ABOVE MAY RESULT IN
SERIOUS INJURY.
The Industrial Control Panel is
Dimensions
Without Tray - 29 5/8” L x 27” W x 51” H
With Tray and Control Box - 41 1/4” L x 36 1/4 “ W x 51” H
Weight
190 Lbs (86.18 Kg)
Speed
Variable Speed 0-20 RPM
Power
Amperage: 1.3 Amps
Voltage: 110 V
Hertz: 60Hz
DIMENSIONS | WEIGHT | SPEED
WARNING
This machine contains moving parts.
Do not attempt to touch the top or bottom blades while the machine is in operation.
Long hair or loose clothing can get caught in the moving parts.
Ensure that any loose hanging jewelry, long hair or clothing is away
from the machine.
Do not operate the machine while impaired.
Ensu
Ensure the machine is unplugged prior to any disassembly.

844.DRY.TRIM | [e-mail] | greenbroz.com
UNPACKING & OPERATION
The day has come and you have an incredible new machine in your hands! Congratulations!
There are a few things to do prior to using your machine for the rst time. All parts noted in this manual will
be included with your machine, unless otherwise noted.
Prior to your rst use, you’ll need to gather the following materials:
- Oil. A sample of our resin clear oil can be found in the user manual pack
- Isopropyl alcohol
- B
- Box cutter or razor blade
- Microber cloth
We recommend reviewing all of the disclosures and following all of the instructions
to ensure safety and optimal processing.
Prior to use, ensure that the machine placement is sound.
1. Open the lid and place the material to be processed into the cutting chamber.
2. Close lid. The trimmer will not operate when the lid is open.
3. Plug machine into electric outlet, release E stop, tap screen, tap ‘start trimming’, use slider
to select desired speed, select forward, press start. You may use the count up method by simply
pressing start, or you can input a desired time and press start.
4. You may view the amount of trimmed material being removed by inspecting the trim bin
belbelow the trimmer.
5. As material is processesing, you will see a decrease in volume in the cutting chamber,
and material will be visibly more trim.
6. Occasionally check for any stems caught between the blades. If stems are caught,
tap REVERSE and wait for 2/3 of a rotation in order to release material, then tap FORWARD.
7. When processing is complete, place the container below the ower door, and simply
raise the door while the machine is still running to release your trimmed material.
TToggle between forward and reverse to get the last bit out.
8. Repeat until your harvest is complete.
OPERATION
1. Remove the machine from the shipping container by unscrewing the cart brackets
and remove all the plastic and tape.
2. Open the lid and remove the blade clips holding the blade in place for shipping.
3. Remove the shelf, control box, ns, and starter pack from the trim bin under the machine.
4. Install upper and lower guide ns in the slots on the top and right hand side of the barrel.**
5. Slide the control box onto the wedge bracket.
6. Un6. Unscrew the connector caps from the side of the machine.
7. Plug in the control cables into appropriate ports.
8. Plug machine into power outlet.
9. Using a microber cloth, wipe down the trimming area with isopropyl alcohol.
Congratulations!
Your GreenBroz Model M
is now ready to use.
UNPACKING & ASSEMBLY

MACHINE PARTS
16
15
14
13
12
11
10
9
8
7
6
54
3
2
1
844.DRY.TRIM | [e-mail] | greenbroz.com
15. Emergency Stop
16. Touch Screen
1. Flower Ramp
2. Top Blade
3. Bottom Blade
4. Proximity Safety Switch
5. Removable Barrel
6. Removable Control Box
7.
7. Trim Collection Bin Location
8. Reversible Tray / Flower Collector
9. Flower Door
10. Stainless Steel Stand
11. Lower Flower Fin
12. Upper Flower Fin
13. Hub Key + Hub Screw
14. 14. Wedge Bracket

844.DRY.TRIM | [e-mail] | greenbroz.com
CLOSE-UPS | SHUT DOWN | CLEANING
Upper and Lower
Fin Assembly
Convenient hooks
on both sides for blade
and barrel storage
Cap connectors when you
pressure wash.
1. Unplug the machine.
2. Open lid.
3. Remove upper and lower n.
4. Remove hub screw and key (thumb tightened).
5. Remove top blade.
6. Remove bottom blade.
7.
7. Remove barrel.
8. Wipe down all surfaces with alcohol and lint free cloth.
*** If you’re going to pressure wash your machine, remove HMI control panel and cap power
connections using connector caps that were removed during unpacking.
CLEANING PROCEDURE
SHUT DOWN PROCEDURE
1. Unplug machine from electrical outlet.
CLOSE-UPS

844.DRY.TRIM | [e-mail] | greenbroz.com
PRODUCT PREP & TROUBLESHOOTING
Moisture meter info: We found a regular wood meter to be quite reliable.
Moisture meter made by “General” - MMD4E, about $30.
1. Remove water / fan leaves.
2. Remove owers from the stems, just as you would for hand-trimming.
Tip: Cut stem close to ower.
3. Hang drying your owers keeps them in the best shape for trimming.
Laying buds out to dry tends to press the leaves against the bud,
making them harder to remove.
ISSUE: Dry Trimmer not powering on:
* Make sure your lid is closed.
* Make sure E stop is released.
ISSUE: Hard to insert or remove top blade:
* If there is tension between the motor shaft &
“hub key”, rotate the blade in the opposite
direction, about half in, to release the pressure.
* Make sure the hub & blade are aligned as loose hardware can prevent the hub and top
blade from aligning with the motor shaft.
ISSUE: Top blade vibrates or chatters when rotating:
* Loose mounting screws holding the blade to the hub can cause the blade to chatter.
Make sure hardware is secure on the hub before processing.
* Resin build up can cause vibrating/chattering of the blade as well. If it seems to be the case, clean
blades per the protocol provided.
* When stems get caught inbetween the blades, it could also cause a chattering sound.
NOTE: Take extra precaution while cleaning. Removing hub prior to cleaning can prevent
uneven pressure when removing resin build up on the underside of the top blade.
Attention: Blue Loctite is suggested if the threads on the screws that secure the hub to the blade
have become loosened.
Still having issues?
We want to help!
Call 844.DRY.TRIM (844.379.8746)
and speak to our support team.
TROUBLESHOOTING
PRODUCT PREP

WARRANTY REGISTRATION
Products covered: This limited warranty is limited to GreenBroz, Inc. Dry Trimmer products manufactured by
GreenBroz, Inc. (the “products”) and provides that such product is free from defects in material and workmanship.
Length of warranty: The length of this warranty shall be 12 months from the date of original retail purchase of
the product.
To Qualify for this warranty: The product must be purchased from GreenBroz Inc., or a dealer authorized by
GreenBroz, Inc., to sell the products. This warranty only applies to the rst retail purchaser and is not transferable to
subsequesubsequent owners.
What GreenBroz will repair or replace under warranty: GreenBroz Inc. will repair or replace, at its option, any
part that is proved to be defective in material or workmanship under normal use during the applicable warranty
period. Warranty repairs and replacements will be made without charge for parts or labor. Anything replaced
under warranty becomes the property of GreenBroz, Inc. All parts replaced under warranty will be considered as
part of the original product and any warranty on those parts will expire coincidently with the original product
warranty. To obtain Warranty Service: Contact GreenBroz, Inc. for a return authorization and instructions
ffor warranty.
Exclusions: 1. Any damage or deterioration resulting from neglect of periodic maintenance as specied in any
product owner’s manual or any improper repair or maintenance; 2. Neglect, unauthorized alteration, modications,
misuse, incorporation of use of unsuitable attachments or parts ; 3. Damage caused by salt water, corrosion, rust,
varnish, abrasives, and moisture; or 4. Any product that has ever been declared a total loss or sold for salvage by
a nancial institution or insurer.
Disclaimer of Consequential Damage and Limitations of Implied Warranties: This limited warranty is in lieu of
all other all other expressed or implied warranties, including any warranty of FITNESS FOR A PARTICULAR PURPOSE OR USE
and any implied warranty of MERCHANTABILITY otherwise applicable to this product. GreenBroz, Inc. disclaims any
responsibility for loss of time or use of the product, transportation, commercial loss, or any other incidental or
consequential damage, including lost prots. There are no warranties extended other than as provided herein. This
limited warranty may be modied only by GreenBroz, Inc.
844.DRY.TRIM | [e-mail] | greenbroz.com
LIMITED WARRANTY
GO TO GREENBROZ.COM TO REGISTER.
Click on the product registration page to register your products. You must register
within 30 days from purchase date to activate your warranty.
UNLESS SUBPOENAED, ALL INFORMATION OBTAINED BY GREENBROZ INC. WILL BE KEPT
PRIVATE AND SECURE. GREENBROZ INC. WILL NOT SHARE OR DISTRIBUTE
YOUR INFORMATION WITHOUT CONSENT.

215 CannaGin Destemmer
215 Dry Trimmer
Model M Dry Trimmer
215 420
215 / 420 Alchemist Trichome
Extractor
Rise Conveyor
The Precision Batcher
Sorter
844.DRY.TRIM | [e-mail] | greenbroz.com
Laser Counter
More GreenBroz Harvesting Tools