this mode allows :
- to check a programme
- to change an existing programme by modifi-
cationof an instruction, cancellation of an ins-
truction
selection of the display
mode and display of the
1st instruction
by pressing successively
selected instructions are
displayed
retour to auto-mode
modify an instruction
example : modify the time 21 . 00
selection of the display
mode, display of the 1st set of
grouped days Mon., Tues.,
Thurs., Fri.
search for the instruction
to modify ex : 21 . 00
setting of the new
time, ex : 21 . 30
then enter, the next
instruction appears
ex : 22 . 00
return to auto-mode
cancell an instruction
example : cancell the instruction 9 . 00
press successively to
search for instruction to
cancel, ex : 9 . 00
cancellation of the instruc-
tion by simultaneously
pressing the two keys
then enter, the next
instruction appears
return to auto-mode
this is the normal operating mode of the device :
this mode allows :
- summer / winter time setting
- manual override of the output state :
return to the auto-mode, permanent override
summer / winter time setting
ex : action at 13 . 30
selection of the
automatic override
summer time setting
winter time setting
manual override
by pressing on « I » or « O »
display :
- the flashing symbols and correspond to a temporary
override
example : heating system on from 7 . 30
1st pressing : displayed
override with return to the
auto-mode at the next order
2nd pressing :
permanent override
heating system off
3rd pressing :
return to auto-mode
wiring
technical specifications
electrical characteristics :
- voltage rating : 230 V~ 50/60 Hz
- consumption : 4 VA
- output : 1 changeover contact
16 A-250 V~ AC1
1 A-250 V~ incandescent lamps
functional characteristics :
- programming capacity : 24 programme
steps
- programming setting : 1 minute increments
- accuracy : ± 5min./annum
- supply failure reserve : 24 h
no loss of programme in event of unlimited
power failure.
environment :
- working temperature :
-5° C to + 45° C
- storage température :
-20° C to + 60° C
connection capacity :
- flexible : 1 to 6
- rigid : 1,5 to 10
warranty
A warranty period of 24 months is offered on hager
products, from date of manufacture, relating to any
material of manufacturing defect. If any product is
found to be defective it must be returned via the ins-
taller and supplier (wholesaler). The warranty is with-
drawn if :
- after inspection by hager quality control dept the
device is found to have been installed in a manner
which is contrary to IEE wiring regulations and
accepted practice within the industry at the time of
installation.
- the procedure for the return of goods has not been
followed. Explanation of defect must be included
when returning goods.
hager 07.93
hager electro S.A. - 132 Bld d’Europe - BP 3 - 67 215 Obernai cedex - Tél. 88.49.50.50
display mode auto-mode
selection of the display
mode, display of the 1st set of
grouped days Mon., Tues.,
Thurs., Fri.
➂selection of days
➃modification or cancellation of instructions
➄enter
➅override on I, override off O
➃summer / winter time setting
