hager EGN200AU User manual

EGN200AU
EGN400AU
6LE007167A
Bluetooth® Multi-Function
2-Channel Time Switch
Bluetooth® Multi-Function
4-Channel Time Switch
Hager Mood

2
Contents
1. About the Product .................................... 3
2. Main Features........................................... 4
3. Connection Diagrams............................... 6
4. Technical Specications........................... 8
5. Startup.................................................... 11
6. Manual Commands ................................ 12
7. Reset ...................................................... 14
8. Menu ...................................................... 15
9. Programs................................................ 17
9.1. Writing / Editing a Program........................... 17
9.2. Disabling a Program ..................................... 23
9.3. Deleting a Program ....................................... 24
9.4. Viewing an Event........................................... 24
9.5. Editing an Event............................................ 26
9.6. Deleting an Event.......................................... 27
9.7. Key Lock....................................................... 28
10. Settings ................................................ 29
10.1. BLUETOOTH .............................................. 30
10.2. Date - Time ................................................. 30
10.3. Wire Input.................................................... 31
10.4. Daylight Savings Time ................................ 34
10.5. Astro ........................................................... 38
10.6. Contrast ...................................................... 40
10.7. Backlight..................................................... 41
10.8. Language .................................................... 43
10.9. Changing Settings ...................................... 44
10.10. About ........................................................ 46
11. Update.................................................. 47
12. Battery Failure ...................................... 47

3
1 Contents
1. About the product
EGN200AU and EGN400AU time switches
are electronic programming clocks with
weekly and annual cycles for automatically
controlling different loads.
Examples of applications: street lighting,
neon signs, shop windows, monuments,
façades etc.
The built-in astronomical clock can be set to
switch loads according to sunset and sunrise
times.
An EEN002 / EEN003 twilight sensor
(optional) can be connected to switch loads
depending on the brightness.
Programming by a mobile device via
Bluetooth®wireless technology is
recommended using the configuration
app (iOS and Android) available for free
download.

4
1 Contents
2. Mean Features
• Product delivered with day and time set
(from Paris).
• Programming by application via Bluetooth®
or local programming (except annual).
• Backlit screen.
• Automatic Daylight Savings Time
adjustment.
• Astronomical mode.
• Programming by day or group of days.
• 200 or 400 program steps (depending on
version) On, Off, pulses .
• Constant forcing to On or Off.
• Temporary On or Off variances.
• Variances (temporary, constant or timed)
that can be enabled remotely using a push
button.
• Bar graph for viewing the daily profile for
the 2 or 4 channels (depending on the
version).
• Programmable when off only via the screen
(with limited functionality).
• Twilight switch function via an EEN002 or
EEN003 wired brightness sensor.
When connecting the cell, or before performing
any work on it, cut the 230V power supply to
the clock.

5
1 Contents
▲
▼
cfg
0612 18 24
Home screen
Date
Bluetooth®
enabled
Time
Status
of channel
A, B,
C, D
(depending on
the version)
Daily profile
bar graph
Channel
being
viewed
Brightness
Time
View the screen
of manual
commands
(short press)
Change channel
A, B, C or D
(depending on
the version)
Day selection (cursor)
Press to enable the backlight;
press again to view the home screen
Image 1: presentation of screen saver
and home screen
Screen saver
Display and keys
MTWTFSS

6
1 Contents
3. Connection diagrams
Device must only be installed by an electrician
according to applicable standards.
1Forcing or variance input
2Brightness sensor
Image 2: EGN200AU connection diagram
(2 outputs)

7
1 Contents
1Forcing or variance input
2Brightness sensor
Image 3: EGN400AU connection diagram
(4 outputs)

8
1 Contents
4. Technical specifications
Electrical specifications
• Power supply voltage: 230V~ +10 / -15%
and 240V~ ± 6%
• Network frequency: 50/60Hz
• Consumption: EGN200AU < 350 mW /
EGN400AU < 500 mW
• Output: 2 or 4 non-insulated changeover
contacts (depending on the version)
• Max. break capacity: AC1 μ 16A 230V~
• Incandescent lamps:
- Relay power with contact:
> normally open / 2300 W
> normally closed / 1500 W
• Halogen lamps: 230V~ 2300W
• Compensated fluorescent tubes // (max.
45 μF):
- Relay power with contact:
> normally open / 400 W
> normally closed / 300 W
• Uncompensated fluorescent tubes,
compensated in series: 1000W
• Compact fluorescent lamps and LED
lamps:
- Relay power with contact:
> normally open / 400 W
> normally closed / 300 W
• Min. break capacity: AC1 100mA 230V~
• Rated impulse withstand voltage: 4kV
• Maximum switching rate at full load: 6
switching cycles / minute

9
1 Contents
Functional specifications
• Programming capacity: 200 or 400 steps
depending on the model
• Min. time between 2 steps: 1 minute
• Rate accuracy: ± 0.25 sec / day
• The product switches to standby status
(display off): after 1 minute of no power or
inactivity. It returns to auto mode as soon
as the voltage returns or when a key is
pressed.
• Bluetooth®radio frequency: 2.4 - 2.483 GHz
- Max. emission power: 10 mW
- Scope: 10 m in free field
- Version: 4.2
• Mobile device / PC configuration
- iOS version no earlier than 8
- Android version no earlier than 5.1
- Windows version no earlier than 10
- Bluetooth®: version no earlier than 4.2
• Insulation class: 2
• Action type: 2B
• Software class: Class A
• Ball test temperature: 75 °C
• Upstream protection: 16 A circuit breaker
• Declared voltage and current for ECM
emission test: 230 V~ - 0.5 A
• Protection rating: IP20 (box), IP30 (box
under faceplate)
• Impact resistance: IK04
Battery
• Power reserve: 10 years without any action
• Non-replaceable and non-rechargeable

10
1 Contents
Box
• EGN200AUsize: 36 mm / 2 modules
• EGN400AUsize: 72 mm / 4 modules
• Product for surface mounting on DIN rail
according to EN 60715
Environment
• Operating temperature: -5 °C to +45 °C
• Storage temperature: -25 °C to +70 °C
• Relative humidity: 95% at 20°C
• Pollution level: 2
Connection by screw terminals
• Rigid 0.2 to 4 mm2
• Flexible 0.2 to 2.5 mm2
• Screw impression: PH1