HALDER 22353.0016 User manual

Machine and Fixture Elements
Lifting Pins / Threaded Lifting Pins
Halder, Inc. www.halderusa.com Page 1 of 7
Published on: 28.2.2022
Threaded Lifting Pins • self-locking, with rotatable shackle
22353.0016

Product Description
Heavy-duty lifting element for quick and easy use, with moveable, rotatable shackle and locking
stud to provide protection against unintentional unlocking. For lifting loads, the threaded lifting pin
is inserted into a threaded hole. In contrast to a ringbolt, time-consuming screwing in and out is
therefore unnecessary. The rotatable shackle will always align with the tensile direction of pull
without the pin rotating. This prevents the lifting device from being turned out of the thread and
the component can be lifted safely.
All versions are corrosion-protected. The version made of stainless steel is also resistant to
corrosion and weathering, so it is also suitable for external use. In addition, the high-strength,
precipitation-hardened pin makes extreme loads possible.
Material
Pin part
• Heat-treated steel, tempered, manganese
phosphated
Press button
• Aluminium, orange, anodised
Threaded element
• Stainless steel 1.4542, precipitation-
hardened
Shackle
• Heat-treated steel, tempered, manganese
phosphated
Spring
• Stainless Steel
Assembly
Threaded lifting pins can be mounted into a
thread that is true to gauge.
Mounting:
1. Press in the button and hold it down.
2. Insert the threaded lifting pin.
3. Release the button (The button must be
back in its original position.).
4. Tighten the threaded lifting pin by hand, until
it bears compleately on the bearing surface.
5. It must be ensured that the thread segments
are engaged in the mounting thread.
Dismantling:
1. Unscrew the threaded lifting pin approx. a
quarter of a turn anticlockwise.
2. Press in the button and hold it down.
3. Remove the threaded lifting pin.
4. Release the button.
Operation
Each threaded lifting pin contains an
instruction manual with an EC Declaration of
Conformity.
More information
Further products
• Lifting Pins, self-locking
• Lifting Pins, self-locking, stainless steel
• Threaded Lifting Pins, self-locking
• Threaded Lifting Pins, self-locking, for
centre holes according to DIN 332
• Threaded Lifting Pins, self-locking - INCH
• Threaded Lifting Pins, self-locking, with
rotatable shackle - INCH


Machine and Fixture Elements
Lifting Pins / Threaded Lifting Pins
Halder, Inc. www.halderusa.com Page 2 of 7
Published on: 28.2.2022
Drawing

Order information
|Dimensions Load capacity1)
d1l1d2
-0.07
d3d4d5l2l3l4l5l6l7l8l9l10 F1F2F3
|Locating
thread max.
|Tightening
torque
max.
|Art. No.
[mm] [kN] [mm] [°C] [Nm] [g]
Heat-treated steel
M16 17 13.8 20 38 33.5 24 25.7 54.9 42.5 46 68 123.7 38 12 8.4 4.5 4.2 M16 250 2 700 22353.0016
1) for a 5-fold safety against breakage


Machine and Fixture Elements
Lifting Pins / Threaded Lifting Pins
Halder, Inc. www.halderusa.com Page 3 of 7
Published on: 28.2.2022
Application example

Machine and Fixture Elements
Lifting Pins / Threaded Lifting Pins
Halder, Inc. www.halderusa.com Page 4 of 7
Published on: 28.2.2022

Machine and Fixture Elements
Lifting Pins / Threaded Lifting Pins
Halder, Inc. www.halderusa.com Page 5 of 7
Published on: 28.2.2022

Machine and Fixture Elements
Lifting Pins / Threaded Lifting Pins
Halder, Inc. www.halderusa.com Page 6 of 7
Published on: 28.2.2022

Machine and Fixture Elements
Lifting Pins / Threaded Lifting Pins
Halder, Inc. www.halderusa.com Page 7 of 7
Published on: 28.2.2022
Compliance
RoHS compliant
Contains lead - compliant according to exceptions 6a / 6b / 6c

Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 17.01.2022

Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/

Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic
Republic of Congo or adjacent countries.
