HAMPTON BAY Home Depot User manual

INSTRUCTION MANUAL
Interior Decorative Lighting
Home Depot SKU (411-383) UPC (773546123419)
LIMITED WARRANTY
The manufacturer warrants this lighting xture to be free from defects in materials and workmanship
for a period of ve (5) years from date of purchase. This warranty applies only to the original consumer
purchaser and only to products used in normal use and service. If this product is found to be defective, the
manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the
manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident,
modications, alterations, neglect or mishandling. This warranty shall not apply to any product that is
found to have been improperly installed, set-up, or used in any way not in accordance with the instructions
supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident,
misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material
or workmanship. This warranty shall not apply to the nish on any portion of the product, such as surface
and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and
specially disclaims any warranty, whether express or implied, of tness for a particular purpose, other
than the warranty contained herein. The manufacturer specically disclaims any liability and shall
not be liable for any consequential or incidental loss or damage, including but not limited to any labor
/ expense costs involved in the replacement or repair of said product.
TROUBLESHOOTING:
Possible Cause Corrective Action
Bulb will not light.
1. Bulb is burned out. 1. Replace light bulb.
2. Power is off. 2. Make sure power supply
is on.
3. Faulty wire connection. 3. Check wiring.
Fuse blows or circuit
breaker trips when light
is turned on.
Crossed wires or power
wire is grounding out. Check wire connections.
PRODUCT MAINTENANCE:
1. To clean the outside of the xture, use a dry or slightly dampened clean cloth (use
clean water, never a solvent) to wipe the shade and surface of the xture.
2. To clean the inside of the xture, rst disconnect power to the xture by turning
off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or
slightly dampened clean cloth (use clean water, never a solvent) to wipe the inside
shade and interior surface of the xture.
3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully.
Page 6 Page 1

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):
Thank you for purchasing this Hampton Bay interior decorative lighting. This product
has been manufactured with the highest standards of safety and quality.
FEATURES:
Fixed track-style expertly nished with studio inspired head.
Frosted glass diffuser set in metal cut-out.
Fully directional track-style heads allow you to aim light where it is needed.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service
Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your
SKU# (411-383) or UPC# (773546123419)
CAUTION:
1. Before starting installation of this xture or removal of a previous xture, disconnect
the power by turning off the circuit breaker or by removing the fuse at the fuse
box.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL
QUESTIONS.
3. If you have any non-electrical questions about this xture, please contact our
Customer Service Team at 1-877-527-0313 or visit www.homedepot.com. Please
reference your SKU# (411-383) or UPC# (773546123419).
4. Keep your receipt and these Instructions for Proof of Purchase.
Safety goggles
Page 2 Page 3
Ladder

ASSEMBLY INSTRUCTIONS:
1. Carefully unpack the xture; lay out all parts on clean surface.
2. Turn off power at main fuse box.
3. Make sure the polarity of the track (1) and the track head (2) are the same turn track
head (2) in the proper direction to mount into track (1).
NOTE: If it is difcult to insert track head (2), try turning track head in opposite
direction, as the track head (2) should t easily into track (1).
4. Make sure that locking pin of track head (2) is in place to ensure that track head (2)
is secured to track (1).
BULB INSTRUCTIONS:
1. Install 50W Max GU10 Bulb (3) (not included).
ASSEMBLY:
3. GU10 50W Bulb (not included)
2. Track Head
1. Track
Page 4 Page 5