Handicare QuickMove User manual

Manual nr: 733 Ver. 4 160614
Service manual - English
Visual inspection
Check the condition and function of the assistive device regularly. Check to ensure that seams and material are free from damage.
If there are signs of wear, the product must be inspected and serviced.
Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
The product should be inspected yearly, and wotherwise as required, by a qualified technician.
Service must be performed by a qualified technician.
Functional inspection
Always read the manual
QuickMove
SystemRoMedicTM
SWL: 170 kg/375 lbs

Table of contents
Description of parts ..................................................................... 3
Functions................................................................................................ 3
General................................................................................................... 3
Exploded view ................................................................................ 4
Component list ........................................................................................ 5
Spare parts................................................................................... 6-8
Spare part list ......................................................................................... 6
Replacing spare parts .............................................................................. 7
Periodic inspection...................................................................9-11
Detail descriptions for Periodic inspection.................................................. 9
Periodic inspection, instruction ...........................................................10-11
Care of the product .....................................................................12
Technical information ................................................................13
2SystemRoMedicTM

Split seat pads: both swing away and flip-up.
Knee pad: depth and height adjustable and tiltable.
Foot pedal: for adjusting leg spread in and out.
Angle adjustment crossbar: adjusts seat and handgrip angle up or down to optimise
seating comfort and positioning of user.
Seat depth: two positions, manually adjustable.
Footplate: covered with non-slip surface,detachable.
Description of parts
1. Seat support
2. Depth adjustable kneepad
3. Angle adjustment of the seat
4. Manual adjustment of seat depth
5. Hight adjustable kneepad
6. Footpedal for leg spread adjustment
7. 2 x rear braked castors
8. Detachable footplate
1
2
3
4
5
6
7
87
7
Functions
General
Before the product is used, check to ensure that the screws are securely tightened. The product must be inspected
regularly by an authorized technician. The product must be inspected thoroughly at least once each year, or more
regularly if it is used very frequently. Inspection and service must be performed by an authorized technician.
3
SystemRoMedicTM

Exploded view
4SystemRoMedicTM

Number Name Size
1 Frame
2 Bronze plain bearing
3 Disc
4 Left leg mounted
5 Right leg mounted
6 Legspread mounted
7 Footplate mounted
8 Threaded pin M8 DIN 975
9 Knee pad holder
10 Top hanger
11 Right seat assembly
12 Left seat assembly
13 Off-center adjuster
14 Belt bolt
15 Screw with spring and ball
16 Clamping bolt
17 Screw M6x10/8.8 - DIN 914
18 Grip pipe/welded
19 Foam grip
20 Gas spring
21 Release head/gas spring
22 Screw M6x12/8.8 - ISO 7380
23 Plastic spacer 20x 10.5/10 mm
24 Spacer 10x1/16 mm
25 Spacer 10x1/20 mm
26 Handwheel/60 mm threaded rod
27 Screw M8x30/8.8 - ISO 7380
28 Self locking nut M8/8.8 - DIN 985
29 Plastic nut cover M8
30 Screw M8x30/8.8 - DIN 933
31 Screw M8x25/8.8 - ISO 7380
32 Washer M8 - DIN 9021
33 Screw M8x60/8.8 - DIN 912
34 Nut M10x1/8.8 - DIN 439
35 Plastic nut cover M10 (long)
Component list
5
SystemRoMedicTM

Spare parts
Spare part list
Artikelnummer Produkt Enhet Komponenter Bilder
80100084 Seat kit left QM 1 set 1 x Seat left
2 x Screw M8x20
80100085 Seat kit right QM 1 set 1 x Seat right
2 x Screw M8x20
80100049 Front castor kit 80mm 1 set 1 x Castor without brake
1 x Locking nut
80100073 Rear castor kit 80mm 1 pce 1 x Castor with brake
80100086 Knee pad complete QM 1 pce 1 x Knee pad holder
80100087 Footplate complete QM 1 pce 1 x footplate holder
80100088 Gas spring 1 set 2 x Gas spring
4 x Locking nut
80100089 Cable set for gas spring 1 set 2 x Cable
4 x Rubberwasher
2 x Adjustment screw M7
80100077 Locking handle knee pad 1 set 2 x Handle 50mm
80200016 Belt nut covers 1 set 10 x Nut cover
6SystemRoMedicTM
80100049
80100073
80100086
80100087
80100088
80100089
80100077
80100085
80100084

Change of spareparts
Seat support
Disassemble and change the seat support by unlocking the two screws according to
picture. Use the attached screws to assemble the new seat support and please note
that there is a left and right seat support.
Front castors
Disassemble and change the front castors by unlocking the underneath mounted
screw according to picture. Use the attached screw to assemble the new castor and
ensure correct tightening.
Raer castors with brakes
Disassemble and change the rear castors by unlocking the underneath mounted
screw according to picture. Use the attached screw to assemble the new castor and
ensure correct tightening.
Knee pad
First, loosen the outermost screw, on the underside of the rail to which the knee pad
is attached, on the part that allows inward and outward adjustment of the knee pad.
Then, loosen the locking knob. Install the new knee pad, secure it with the locking
knob, and then tighten the small screw on the underside of the rail.
7
SystemRoMedicTM

Gas spring cabel set for gas spring
Disassemble and change the gas springs by unlocking the nuts according to picture.
Disconnect the cable set by first loosen the adjustment screw on the cable and
secondly unhook the cable from the bracket. Attach the new cable set to the old
one, while still mounted in the frame, and change the old cable by pulling the cable
through the frame. Ensure correct mounting and adjustment by function control.
Footplate
Remove the footplate. No tools are required. Install the new footplate.
8SystemRoMedicTM

Periodic inspection
Detail descriptions for Periodic inspection
1. Frame and pivote points Page 7
2. Brakes Page 7
3. Castors Page 7
4. Footpedal for leg spread adjustment Page 7
5. Detachable footplate Page 7
6. Leg support Page 8
7. Angele adjustment crossbar Page 8
8. Gas spring Page 8
9. Seat support Page 8
9
SystemRoMedicTM
1
2
3
4
5
6
9
7
8

Periodic inspection, instruction
Frame and pivote points
Check screws, nuts and bolts.
Check the frame for visible damage to the surfaces, finish, etc.
Brakes
Lock the brakes. Check that the castors do not turn when the QuickMove is
pushed.
Castors
Roll the QuickMove unloaded on the floor, check that the castors roll and turn freely.
Check that the castor fasteners are tight and if necessary, remove dirt and hair from
wheels.
Footpedal for leg spread adjustment
Check the footpedal for adjusting the leg spread in and out.
Detachable footplate
Check the footplate for visible damage to the surfaces, finish, etc. Make sure it is
correctly assembled.
Make sure that the covered with non-slip surface is ok.
10 SystemRoMedicTM