Harbor Breeze LP8221LCH User manual

Español p. 15
ITEM #0232646
MODEL #LP8221LCH
BLUE HILL CEILING FAN
Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-567-2055, 8 a.m. - 5 p.m., EST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
Lowes.com/harborbreeze
1
EB13235

Lowes.com/harborbreeze
TABLE OF CONTENTS
Package Contents .........................................................................................................................
Hardware Contents .......................................................................................................................
Safety Information .........................................................................................................................
Preparation ...................................................................................................................................
Assembly Instructions ...................................................................................................................
Wiring Instructions ........................................................................................................................
Final Assembly Instructions ..........................................................................................................
Operating Instructions ....................................................................................................................
Care and Maintenance .................................................................................................................
Troubleshooting ............................................................................................................................
Warranty .......................................................................................................................................
Replacement Parts List ................................................................................................................
3
4
4
5
6
7
8
9
11
12
13
14
2

B
C
D
A
Lowes.com/harborbreeze
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A
B
C
D
Motor Assembly
Blade
Remote
Receiver (preassembled to Motor
Assembly (A))
1
3
1
1
3

HARDWARE CONTENTS (shown actual size)
Wire
Connector
Qty. 4
DD
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Before you begin installing the fan, disconnect the power by removing fuses or turning off circuit
breakers.
• Make sure all electrical connections comply with local codes, ordinances, or the National
Electrical code. Hire a qualified electrician or consult a do-it-yourself wiring handbook if you are
unfamiliar with installing electrical wiring.
•Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades
to the floor and at least 30 in. from the ends of the blades to any obstruction.
•If you are mounting the fan to a ceiling outlet box, use a METAL octagonal outlet box.
Secure the box directly to the building structure. The outlet box and its support must be able to
support the moving weight of the fan (at least 35 lbs.). Do NOT use a plastic outlet box.
• After you install the fan, make sure all connections are secure to prevent the fan from falling.
• For supply connections, if the conductor of a fan is identified as a grounded conductor, then it
should be connected to a grounded conductor power supply. If the conductor of a fan is identified
as an ungrounded conductor, then it should be connected to an ungrounded conductor power
supply. If the conductor of a fan is identified for equipment grounding, then it should be connected
to an equipment-grounding conductor.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
Flat
Washer
Qty. 13
BB
Lowes.com/harborbreeze
Serrated Head
Screw
Qty. 13
AA
Nylon
Lock Nut
Qty. 5
CC
4

SAFETY INFORMATION
• The net weight of this fan is: 16.42 lbs.
PREPARATION
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Lowes.com/harborbreeze
WARNING
• Do not install or use fan if any part is damaged or missing.
• To reduce the risk of fire, electrical shock, or personal injury, wire connectors provided with this
fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If
your house wire is larger than 12-gauge or there is more than one house wire to connect to the
two fan lead wires, consult an electrician for the proper size wire connectors to use. Before
cutting, drilling or hammering, verify their location. If needed, contact your electrician, plumber
or service person.
• To reduce the risk of fire, electric shock, or personal injury, do not bend the blade arms when
installing them, balancing the blades, or cleaning the fan. Do not insert foreign objects between
the rotating fan blades. Mount to outlet box marked “ACCEPTABLE FOR FAN SUPPORT” and
use mounting screws provided with the outlet box. Most outlet boxes commonly used for the
support of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
• This fan is to be used in dry locations only.
• Read all instructions and safety information before installing the new fan. Review accompanying
assembly diagrams.
CAUTION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Phillips screwdriver, 1/4 in. flathead screwdriver,
wire stripper and step ladder.
Helpful Tools (not included): AC tester light, do-it-yourself wiring handbook and wire cutters.
5
• Do not operate this fan with a variable (Rheostat) wall controller or dimmer switch. Doing so could
result in damage to the ceiling fan's remote control unit.

ASSEMBLY INSTRUCTIONS
1. Secure metal octagonal outlet box (not included)
directly to the building structure.
Lowes.com/harborbreeze
NOTE: Supply wires omitted for clarity.
1
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before assembly.
WARNING
3. Securely attach the ceiling plate to the outlet
box with screws and washers (not included). 3
2. Remove the two preassembled screws from
ceiling plate in motor assembly (A). 2
A
6

ASSEMBLY INSTRUCTIONS
Lowes.com/harborbreeze
1
A
White Wire
from Fan
Black Wire
from Fan
White Wire
from Supply
Black Wire
from Supply
Green Wire (Ground)
from Supply
Green Wire
(Ground)
from Ceiling Plate
DD
WIRING INSTRUCTIONS
NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as
it must be grounded for safe operation.
Hardware Used
DD x 3
Wire
Connector
To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring.
WARNING
1. Connect the green grounding lead from
the ceiling plate to the supply grounding
conductor (this may be a bare wire or wire with
green colored insulation). Securely connect
wires with wire connector (DD). Securely
connect the white fan motor wire to the white
supply (neutral) wire using wire connector (DD).
Securely connect the black fan motor wire to
the black supply wire using wire connector (DD).
2. After connections have been made, turn leads
upward and carefully push leads into the
recessed portion of the ceiling plate with the
white and green leads to one side and the
black leads to the other side.
WARNING
Check to see all connections are tight, including
ground, and no bare wire is visible at the wire
connectors except for the ground wire. Do not
operate fan until the blades are in place. Noise
and motor damage could result.
A
4
4. Hook the ceiling support cable from motor
assembly (A) to the hook on the ceiling plate.
7

FINAL ASSEMBLY INSTRUCTIONS
Lowes.com/harborbreeze
NOTE: This step is applicable after the necessary wiring
is completed.
Hardware Used
CC x 4
Nylon
Lock Nut
2. Securely attach motor assembly (A) by twisting
clockwise onto the ceiling plate.
3. Remove the blade bushing cover from the blade
(B).
1
A
2
3
1. Assemble the motor assembly (A) to the
ceiling plate using nylon lock nuts (CC).
A
B
CC
8

FINAL ASSEMBLY INSTRUCTIONS
Lowes.com/harborbreeze
OPERATING INSTRUCTIONS
1. Restore electrical power to the outlet box by
turning the electricity on at the main fuse box.
1
ON
ON
ON
ON
ON
ON
ON
ON
2
A
B
4
Hardware Used
Serrated Head
Screw
AA x 12
BB Flat
Washer x 12
4. Position the blades (B) onto the blade arms of
motor assembly (A) with threaded posts
showing. Make sure the blades (B) are fully
seated against the blade arms of motor
assembly (A). Install and tighten serrated head
screws (AA) with flat washers (BB) to secure
the blades (B) to the blade arms of motor
assembly (A).
BB
AA
9
2.
IMPORTANT: Using a full range dimmer switch
(not included) to control fan speed will damage
the fan. To reduce the risk of fire or electrical shock,
do not use a full range dimmer switch to control the
fan speed.
For illustrative purposes only-not
intended to cover all types of controls
WARNING
Do not operate this fan with a variable (Rheostat)
wall controller or dimmer switch. Doing so could
result in damage to the ceiling fan's remote
control unit.

3
C
3. To make fan operational, install 12-volt battery
(included in remote control package) into the
remote (C).
If you are not expecting to use the remote for a
long period of time, remove the battery to
prevent damage to the remote. Be sure to store
the remote away from excess heat or humidity.
CAUTION
Lowes.com/harborbreeze
4. Follow the below steps to set the remote (C):
OPERATING INSTRUCTIONS
4
10
1) When powering on your fan, do not press
any button(s) before pressing the “SET”
button, otherwise it will fail the learn
procedure. If you press a button before the
“Set” button, please turn the power off then
on again, and start the process again.
2) Set the dip switches inside the battery
compartment door of the hand held
transmitter to the desired setting.
3) After installing the unit and restoring
power to your fan, press and hold the “SET”
button 1~5 seconds. You must press the
“SET” button within 60 seconds of restoring
power to the fan.
4) The fan will start to run and begin the
control setting process.
5) DO NOT press any button(s) after
pressing the SET button and while the fan is
programming or it will fail to program. The
fan will run in both directions for a total of
approximately 5 minutes.
6) When the fan stops after approximately 5
minutes the control and speed setting
process is complete.
The fan is now ready for normal use.
If you want to change the blades: turn
the off→ change the blades →turn the
power on →replay the power setting process.
NOTE

OPERATING INSTRUCTIONS
6. The receiver provides the following
protective function:
Lock position: The DC motor has a built-in
safety feature against blade obstruction
during operation. If something obstructs the
fan blades, the motor will stop operating after
30 seconds of interruption. Please remove
obstacles and reset.
Over 80 W protection: When the receiver
detects motor power consumption greater than
80 watts, the receiver power will shut down
and fan operation will cease. Disconnect the
power supply and after 5 seconds return
power to the fan.
6
Code Switches
•When cleaning, use only a soft brush or lint-free cloth to avoid scratching the finish.
•Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.
RECOMMENDED: Periodically check that the fan motor unit screws, blade screws and support
housing are tight and secure.
• Periodic light dusting of the blades is recommended. Afeather duster will work best.
• Avoid using water, cleansers, or harsh rags, which can warp and ruin the finish.
• Do not install or use fan if any part is damaged or missing.
CARE AND MAINTENANCE
Lowes.com/harborbreeze
WARNING
• Do not use water when cleaning the ceiling fan. It could damage the motor or the finish and
create the possibility of electrical shock.
11
5. Remote (C) functions:
I = minimum speed II = low speed
III = medium low speed IV = medium speed
V = medium high speed VI = high speed
Button:
Turns the fan off.
Reverse button:
Controls fan direction.
Fan speed: 5
C

TROUBLESHOOTING
4. Wire connectors inside housing are
rattling.
1. Blades not attached to fan.
2. Loose screws in motor housing.
3. Screws securing fan blade arms to
motor hub are loose.
1. Check main and branch circuit
fuses or circuit breakers.
2. Check line wire connections to
fan.
WARNING
Make sure main power is turned
off!
4. Check to make sure wire
connectors in switch housing
are not rattling against each
other or against the interior wall
of the switch housing.
1. Attach blades to fan before
operating.
2. Check to make sure all screws
in motor housing are snug
(do not overtighten).
3. Check to make sure the screws
that attach the fan blade
arms to the motor hub are tight.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Fan will not start. 1. Fuse or circuit breaker blown.
2. Loose power line connections
3. Dead battery in remote control. 3. Replace with new battery.
to the fan.
Fan sounds noisy.
5. Screws holding blades to blade
arms are loose.
Lowes.com/harborbreeze
5. Tighten screws securely.Fan sounds noisy.
Blade arms are not seated properly. Check to be sure the fan blade
arms seat firmly and uniformly
to the surface of the motor
housing. If arms are seated
incorrectly, loosen the screws
and retighten.
Fan wobbles
excessively.
12

WARRANTY
To obtain warranty service, present a copy of your sales receipt as proof of purchase. All cost of
removal and reinstallation are the expressed responsibility of the purchaser. Any damage to the
ceiling fan by accident, misuse or improper installation, or by affixing accessories not produced by
this warranty, are at the purchaser’s own responsibility. The manufacturer assumes no responsibility
whatsoever for fan installation during the lifetime limited warranty. Any service performed by an
unauthorized person will render the warranty invalid.
Due to varying climate conditions, this warranty does not cover changes in brass finish, rusting,
pitting, tarnishing, corroding or peeling. Brass finish fans maintain their beauty when protected from
varying weather conditions. Any glass provided with this fan is not covered by the warranty.
Any replacement of defective parts for the ceiling fan must be reported within the first year from the
date of purchase. For the balance of the warranty, call our customer service department at
1-888-567-2055 for return authorization and shipping instructions so that we may repair or replace
the ceiling fan. Any fan or parts returned improperly packaged is the soleresponsibility of the purchaser.
There is no further expressed warranty. The manufacturer disclaims any and all implied warranties.
The duration of any implied warranty which can not be disclaimed is limited to the lifetime limited
period as specified in our warranty. The manufacturer shall not be liable for incidental, consequential
or special damages arising at or in connection with product use or performance except as may
otherwise be accorded by law. This warranty gives you specific legal rights and you also have other
rights which vary from state to state. This warranty supersedes all prior warranties.
Note: A small amount of “wobble” is normal and should not be considered a defect.
Lowes.com/harborbreeze
The manufacturer warrants this fan to be free from defects in workmanship and material present at
time of shipment from the factory. The warranty terms from the date of purchase. The motor has a
lifetime warranty and a 2 year warranty for all remaining components. This warranty applies only to
the original purchaser. The manufacturer agrees to correct such defect at no charge or, at its option,
replace the ceiling fan with a comparable or superior model.
13

Printed in China
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-888-567-2055, 8 a.m. - 5 p.m.,
EST, Monday - Friday.
Lowes.com/harborbreeze
Harbor Breeze® is a registered
trademark of LF, LLC. All Rights
Reserved.
DD
B
C
A
D
AA
BB
PART DESCRIPTION PART #
AMA8221LCH
AP822103WH
TR34WH
RECAN125S
HDWBM8221CH
HDWBM8221CH
HDWHW8221
HDWWNUTS4
Motor Assembly
Blade
Remote
Receiver Unit
Serrated Head Screw
Flat Washers
Nylon Lock Nut
Wire Connector
A
B
C
D
AA
BB
CC
DD
CC
14

ARTÍCULO #0232646
MODELO #LP8221LCH
VENTILADOR DE TECHO BLUE HILL
Lowes.com/harborbreeze
Harbor Breeze® es una marca registrada
de LF, LLC. Todos los derechos reservados.
ADJUNTAR SU RECIBO AQUÍ
Número de serie Fecha de compra
¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro
Departamento de Servicio al Cliente al 1-888-567-2055, 8 a.m. - 5 pm, hora del Este, de
lunes - viernes.
15

Lowes.com/harborbreeze
Contenido del paquete ...................................................................................................................
Aditamentos ...................................................................................................................................
Información de seguridad ..............................................................................................................
Preparación ...................................................................................................................................
Instrucciones de ensamblaje .........................................................................................................
Instrucciones de cableado .............................................................................................................
Instrucciones de ensamblaje finales ..............................................................................................
Instrucciones de funcionamiento ...................................................................................................
Cuidado y mantenimiento ..............................................................................................................
Solución de problemas ..................................................................................................................
Garantía .........................................................................................................................................
Lista de piezas de repuesto............................................................................................................
17
18
18
20
21
23
24
26
28
29
30
31
ÍNDICE
16

B
C
D
A
Lowes.com/harborbreeze
CONTENIDO DEL PAQUETE
A
B
C
D
Ensamble del motor
Aspa
Control remoto de mano
Unidad receptora
(
preensamblado en el
ensamble de motor (A))
1
3
1
1
PIEZA DESCRIPCIÓN CANTIDAD
17

Conectores
de cable
Cant. 4
DD
Arandelas
Planas
Cant. 13
BB
Lowes.com/harborbreeze
Tornillo de
cabeza dentada
Cant. 13
AA
Contratuerca
de nailon
Cant. 5
CC
ADITAMENTOS (Se muestan en tamaño real)
INFORMACIÓN DE SEGURIDAD
Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el
producto.
• Antes de comenzar la instalación del ventilador, desconecte la alimentación eléctrica retirando
los fusibles o colocando el interruptor de circuito en la posición de apagado.
• Asegúrese de todas las conexiones eléctricas cumplan con los códigos locales, las ordenanzas
del Código Nacional de Electricidad. Si no está familiarizado con la instalación del o el Código
cableado eléctrico, contrate a un electricista calificado o consulte un manual de cableado para
hacerlo usted mismo.
•Asegúrese de que el sitio de instalación que elija permita una distancia mínima de 2,13 m desde
las aspas hasta el piso y al menos a 76,20 cm desde los extremos de las aspas hasta cualquier
obstáculo.
•Si desea montar el ventilador en una caja de salida del techo, use una caja de salida octagonal
de METAL. Asegure la caja directamente a la estructura del edificio. La caja de salida y su soporte
deben ser capaces de sostener el peso del ventilador en movimiento (como mínimo 15,88 kg).
NO use una caja de salida de plástico.
• Una vez instalado el ventilador, asegúrese de todas las conexiones sean seguras a fin de evitar
que se caiga.
• En lo que respecta a las conexiones de suministro, si el conductor del ventilador está identificado
como conductor con conexión a tierra, se le debe conectar a un suministro de electricidad con
conductor de puesta a tierra. Si el conductor del ventilador está identificado como conductor que
no es de puesta a tierra, se le debe conectar a un suministro de electricidad con conductor sin
puesta a tierra. Si el conductor del ventilador está identificado para equipos de puesta a tierra, se
le debe conectar al conductor de equipos de puesta a tierra.
• Este equipo cumple con lo establecido en la Parte 15 de la Normativa FCC. Su funcionamiento
está sujeto a las dos condiciones siguientes: (1) Este equipo no causará interferencias perjudiciales
y (2) este equipo tolerará cualquier interferencia recibida, incluidas las interferencias que puedan
provocar un funcionamiento no deseado. Si el radiador intencional puede ser clasificado como un
dispositivo digital de clase B o un periférico del ordenador, entonces se deberán incluir los
siguientes o equivalentes:
18

Lowes.com/harborbreeze
INFORMACIÓN DE SEGURIDAD
ADVERTENCIA
• No instale ni use el ventilador si falta alguna pieza o si éstas están dañadas.
• Para reducir el riesgo de incendios, descargas eléctricas o lesiones personales, los conectores
de cable incluidos con este ventilador están diseñados para soportar sólo un cable interior de
calibre 12 y dos cables conductores del ventilador. Si el cable interior es de un calibre superior a
12 o hay más de un cable interior para conectar los dos cables conductores del ventilador,
pregúntele a un electricista cuáles son los conectores de cable de tamaño correcto que se
deben usar.
• Para reducir el riesgo de incendios, descargas eléctricas o lesiones personales, no doble los
brazos de las aspas al instalarlas, al equilibrarlas o al limpiar el ventilador. No introduzca objetos
extraños entre las aspas en movimiento. Instale en una caja de salida marcada como
“ACCEPTABLE FOR FAN SUPPORT” (APTA PARA SOPORTE DE VENTILADOR) y use los
tornillos de montaje que se proporcionan con la caja de salida. La mayoría de las cajas de salida
que se usan comúnmente para sostener ensambles de iluminación no son aptas para sostener
un ventilador y puede ser necesario reemplazarlas. Si tiene dudas, consulte con un electricista
calificado.
• Este ventilador es apto sólo para lugares secos.
• Lea todas las instrucciones y la información de seguridad antes de instalar el nuevo ventilador.
Revise los diagramas de ensamblaje adjuntos.
PRECAUCIÓN
Nota: Tras someterlo a las pruebas correspondientes, se ha determinado que este equipo cumple
con los límites establecidos para dispositivos digitales de Clase B de conformidad con la parte 15
de la Normativa FCC. Estos límites se han establecido con el objetivo de aportar una protección
razonable contra interferencias perjudiciales cuando el equipo se utiliza en el hogar. Este equipo
genera, utiliza y puede emitir energía de radiofrecuencia y, a menos que se instale y se utilice de
acuerdo con el manual de instrucciones, puede provocar interferencias perjudiciales en las
comunicaciones por radio y televisión. Si el equipo produce interferencias perjudiciales en la
recepción de radio o televisión, lo cual puede probarse encendiendo y apagando el equipo, se
recomienda al usuario corregir dichas interferencias tomando una o varias de las siguientes
medidas:
- Modificar la orientación o ubicación de la antena de recepción;
- Aumentar la separación entre el equipo y el receptor;
- Conectar el equipo a una toma de corriente o circuito diferente al del receptor;
Consulte al distribuidor o a un técnico especialista de radio o TV para obtener más ayuda.
Nota: Para un dispositivo digital de clase A, la declaración de 15. 105(a) debe ser incluida cuando
sea apropiada para el dispositivo en cuestión.
• El peso neto de este ventilador es: 7,45 kg.
19
• No utilice este ventilador con un controlador variable de pared (Rheostat) o un regulador de
intensidad. Si lo hiciera podría dañar la unidad del mando a distancia del ventilador de techo.

Lowes.com/harborbreeze
Antes de comenzar a ensamblar el producto, asegúrese de tener todas las piezas. Compare las
piezas con la lista del contenido del paquete y lista de aditamentos. No intente ensamblar el
producto si falta alguna pieza o si éstas están dañadas.
Tiempo estimado de ensamblaje: 60 minutos
Herramientas necesarias para el ensamblaje (no se incluyen): Destornillador Phillips,
destornillador de punta plana de 1/4”, pinzas pelacables y escalera de tijera.
Herramientas útiles: Luz de prueba CA, manual de cableado para hacerlo usted mismo y pinzas
cortacables.
PREPARACIÓN
20