Harbor Breeze VALDOSTA L1120H-BK User manual

1
Serial Number Purchase Date
AS23190
ATTACH YOUR RECEIPT HERE
Questions, problems, missing parts? Before returning to your retailer , call our customer
service department at 888-251-1003, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also
contact us at [email protected]
HARBOR BREEZE and logo design are
trademarks or registered trademarks of
LF, LLC. All rights reserved.
Español p. 10
VALDOSTA PORTABLE FAN
ITEM # 5380809
MODEL # L1120H-BK

2
TABLE OF CONTENTS
Package Contents...............................................................................................................
Hardware Contents.............................................................................................................
Safety Information...............................................................................................................
Preparation .........................................................................................................................
Assembly Instructions...........................................................................................................
Operating Instructions ........................................................................................................
Care and Maintenance .......................................................................................................
Troubleshooting...................................................................................................................
Limited Lifetime Warranty....................................................................................................
Replacement Parts List ......................................................................................................
3
4
4
5
5
7
8
8
9
9

3
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
ADownrod Assembly 1
B Coupling Cover 1
C Rod Clip 1
D Motor Body 1
EWire Clip 6
F Coupling (Preassembled to the Motor Body (D)) 1
G Cross Pin (Preassembled to Coupling (F)) 1
H Clip (Preassembled to Coupling (F)) 1
I Coupling Screw (Preassembled to Coupling (F)) 2
A
B
C
G H I
D
F
E

4
HARDWARE CONTENTS (shown actual size)
SAFETY INFORMATION
READ AND SAVE THESE INSTRUCTION
hanging structure can support the weight, do not attempt to install this fan as it may fall and cause
regarding proper mounting methods in your area.
the fan before installing, cleaning and servicing the item.
device.
situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user
servicing instructions (follow product marking for proper fuse rating) and check the product. If the
replacement fuse blows, a short circuit may have happened and the product should be discarded or
returned to an authorized service facility for examination and/or repair.
facility for examination and/or repair.
will not be tripped over.
Set Screw
Qty. 1
Acorn Nut
Qty. 1
AA BB
WARNING
Do not damage or deform the cage of the fan.

5
PREPARATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 45 minutes
Tools Required for Assembly (not included): Philips Screwdriver, Step Ladder, Tape and Pliers.
IMPORTANT: To avoid over-pull to damage the wire and plug, turn off circuit breakers and wall
switch to the fan supply line leads.
ASSEMBLY INSTRUCTIONS
1. Choose the desired mounting method:
A. Standard Mounting:
Note: For a ceiling higher than 8 ft., you can
purchase an extension downrod.
B. Angle Mounting: Angle mounting is used for
vaulted or angled ceilings.
Note: The preferred mounting method is to gazebos
or pagodas. However, other mounting methods
are also supported. For example, the fan can be
mounted on a drywall, provided the surface supports
a minimum weight of 65 lbs.
1
A
B
2. Remove the clip (H) and cross pin (G) from the
coupling (F) on the motor body (D). Loosen the
coupling screws (I) on the motor body (D).
2H
F
D
G
I
H
G

6
ASSEMBLY INSTRUCTIONS
3. Insert downrod assembly (A) through coupling cover
(B) into coupling (F). Make sure to align the hole in
downrod assembly (A) with the hole in coupling (F).
Install cross pin (G) through coupling (F) and downrod
assembly (A). Insert clip (H) into cross pin (G) until it
snaps into place. Tighten coupling screws (I) and slide
the coupling cover (B) onto the motor body (D).
3
4. Secure the wire from motor body (D) to the downrod
assembly (A) with rod clip (C). Use set screw (AA) and
acorn nut (BB) to tighten rod clip (C).
4
Hardware Used
Set Screw
Acorn Nut
x 1
x 1
AA
BB
A
A
BB
C
AA
G
B
D
A
H
I
F
5. For ceiling-mount installations, attach a standard
mounting bracket (not included) to a ceiling or outdoor
gazebo/pagoda per the bracket instructions. Then,
attach the fan assembly to the mounting bracket from
the spring clip on downrod assembly (A).
5
WARNING: Ensure the hanging structure
can support a minimum weight of 65 Ibs and allow
enough depth for safety mounting. If you are not
sure the hanging structure can support the weight,
do not attempt to install this fan as it may fall and
cause damage to the fan or personal injury.
Bracket
Spring Clip

7
6. Peel the backing off the adhesive tape stripes on the
bottom of the wire clips (E). Attach the wire clips (E)
as needed to the wall or ceiling and press gently. Clip
the power cord to the wire clips (E). Plug the power
cord into a ground 3-prong outlet. Once you restore
power to the house, the fan is ready to use.
1. The knob on the bottom of the fan operates the fan
speed as follows: High, Medium, Low, and Off.
6
1
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
E
Knob

8
•Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean
blades with a lint-free cloth.
• This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the outlet and replace the fuse as below:
1) Grab the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling
on cord.
2) Slide open fuse access cover on top of attachment plug toward blades.
3) Remove the fuse carefully.
4) Replace fuse.
CAUTION: Risk of fire. Use only 5-amp, 125-volt fuses.
5) Slide closed the fuse access cover on top of attachment plug.
CAUTION: Risk of fire. Do NOT replace the attachment plug, as it contains a safety device
(fuse) that should not be removed. Discard the product if the attachment plug is damaged.
IMPORTANT: Shut off the main power supply before beginning any maintenance. Do not use
water or a damp cloth to clean the ceiling fan.
CARE AND MAINTENANCE
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
1. Fan does not
move
1. Power is off or fuse is blown.
2. Bad wire connection.
1. Turn power on or check fuse.
2. Turn power off. Loosen canopy,
check all connections.
2. Noisy operation 1. Blades are loose.
2. Blade is cracked.
3. Non-approved speed control.
1. Tighten all blade screws.
2. Replace blades (call customer
service for special replacement).
3. Replace with an approved speed
control device.
3. Excessive
wobbling
1. Unbalanced blades.
2. Blades are loose.
3. Fan not securely mounted.
4. Fan too close to vaulted ceiling.
1. Switch with blade from opposite
side.
2. Tighten all blade screws.
3. Turn off power. Carefully loosen
canopy, and remount securely.
4. Lower or move fan. Extension
downrods may be offered (call
customer service).

LIMITED LIFETIME WARRANTY
PART DESCRIPTION PART #
A Downrod Assembly A103-0230406
B Coupling Cover A106-0108406
C Rod Clip
AA Set Screw
BB Acorn nut
manship and material present at
This warranty
applies only to the original purchaser.
T
. Any damage to the
.
.
unauthorized person will render the warranty invalid.
varying weather conditions.
888 - 251 - 1003
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 888-251-1003, 8 a.m. - 8 p.m., EST,
Monday - Sunday. You could also contact us at [email protected].
C
E
AA
BB
A
B