Hatco Glo-Ray GR2SDH-24 User manual

ITEM#
ANSI/NSF 4
GLO-RAY ®
DESIGNER MERCHANDISING WARMERS
Models GR2SDH-24, -30, -36, -42, -48, -54, -60 GR2SDH-24D, -30D, -36D, -42D, -48D, -54D, -60D
GR2SDS-24, -30, -36, -42, -48, -54, -60 GR2SDS-24D, -30D, -36D, -42D, -48D, -54D, -60D
Designed to hold hot wrapped food at
optimum serving temperatures without
affecting quality, the Hatco Glo-Ray
Designer Merchandising Warmers are
the perfect displays to showcase hot
fast foods and boost impulse sales.
Combining state-of-the-art design
with performance, these warmers place
the focus on the product while holding
hot food safely at proper serving
temperatures. The modern design is
perfect for front of the house use.
Designer powdercoated inset panels
blend these units with the décor while
providing a durable, easy-to-clean surface.
Glo-Ray Designer Merchandising
Warmers have prefocused infrared top
heat and a thermostatically-controlled,
hardcoated heated base to extend the
holding times of most food. All models
are made of aluminum with tempered
glass end panels. Shatter-resistant
incandescent lights illuminate the food
holding area.
FLEXIBILITY
This warmer offers the convenience of
self-serve and the efficiency of kitchen-
to-server holding.
Available with slant or horizontal shelves,
the Glo-Ray Designer Merchandising
Warmers are offered in both single and
dual shelf models. The Designer series
warmers come standard with black inset
panels. Choose from five other color
options to blend the warmer with
any décor.
QUALITY
The following features assure the finest
performance for years to come:
• All models have prefocused infrared
top heat directing heat to the outer
edges of the holding surface where
heat loss is the greatest.
• These warmers feature a
thermostatically-controlled, hardcoated
heated base, Designer color inset
panels, 4" (102 mm) Designer legs,
and a cord and plug set.
• Available in heated surface widths
from 233⁄4" to 593⁄4" (603 to 1518 mm)
with overall widths of 301⁄8" to
661⁄8" (765 to 1680 mm).
• Shatter-resistant incandescent lights
enhance product display while
safeguarding food products from
bulb breakage.
• An optional Indicating Temperature
Control enhances accurate control
of temperature.
METAL SHEATHED HEATING ELEMENTS GUARANTEED
AGAINST BURNOUT AND BREAKAGE FOR TWO YEARS,
BLANKET ELEMENTS FOR ONE YEAR.
Model GR2SDH-30 with
Designer color inset panels
Model GR2SDS-30D with
Designer color inset panels
Divider Rods
Model Width Divider Rods Provided Average Chute Width
301⁄8" ( 765 mm) 5 Rods per Shelf 33⁄4" ( 95 mm)
361⁄8" ( 918 mm) 6 Rods per Shelf 41⁄4" (108 mm)
421⁄8" (1070 mm) 7 Rods per Shelf 41⁄2" (114 mm)
481⁄8" (1222 mm) 8 Rods per Shelf 41⁄2" (114 mm)
541⁄8" (1375 mm) 9 Rods per Shelf 41⁄2" (114 mm)
601⁄8" (1527 mm) 10 Rods per Shelf 45⁄8" (117 mm)
661⁄8" (1680 mm) 12 Rods per Shelf 41⁄2" (114 mm)
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
[phone] • [phone] • Fax [phone] • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [email protected]
Form No. GR2SD Spec Sheet
Printed in U.S.A.
April 2007

223⁄8"
(568 mm)
22" (559 mm)
265⁄8" (676 mm)
FRONT VIEW
SIDE VIEW
8"
(203 mm)
233⁄4" to 593⁄4"
(603 to 1518 mm)
301⁄8" to 661⁄8" (765 to 1680 mm)
DIMENSIONS
Horizontal Models (GR2SDH) –
Single: 301⁄8"- 661⁄8"W x 27"D x 18"H (765-1680 x 686 x 457 mm).
Dual: 301⁄8"- 661⁄8"W x 27"D x 29"H (765-1680 x 686 x 737 mm).
Slant Models (GR2SDS) –
Single: 301⁄8"- 661⁄8"W x 265⁄8"D x 223⁄8"H (765-1680 x 676 x 568 mm).
Dual: 301⁄8"- 661⁄8"W x 265⁄8"D x 333⁄8"H (765-1680 x 676 x 848 mm).
Heated Surface: 233⁄4"- 593⁄4"W x 22"D (603-1518 x 559 mm).
VOLTAGE
GR2SDH-24 to -48 & GR2SDS-24 to -48: 120 volts, single phase
(uses NEMA 5-15P, models GR2SDH-42 to -48 & GR2SDS-42
to -48 uses NEMA 5-20P for Canada).
GR2SDH-54 & GR2SDS-54: 120 volts, single phase
(uses NEMA 5-20P).
GR2SDH-60 & GR2SDS-60: 120 volts, single phase
(uses NEMA 5-30P).
GR2SDH-24D & GR2SDS-24D: 120 volts, single phase
(uses NEMA 5-15P, uses NEMA 5-20P for Canada).
GR2SDH-30D to -54D & GR2SDS-30D to -54D: 120/208 volts,
or 120/240 volts, single phase, 4-wire (uses NEMA L14-20P).
GR2SDH-60D & GR2SDS-60D: 120/208 volts or 120/240 volts,
single phase, 4-wire (uses NEMA L14-30P).
Export voltages available.
CORD LOCATION
Back center of base on control side.
PLUG CONFIGURATIONS
OPTIONS (NOT FOR RETROFIT)
❑ Unit and Inset Panel Designer Colors: Warm Red, Black,
Gray Granite, White Granite, Navy Blue, and Hunter Green
❑ 5" (127 mm) Breath Protector on Customer Side
❑ Indicating Temperature Control (ITC)
❑ Halogen Bulbs in lieu of Standard Display Lights
ITEM#
GR2SDH
Models
GR2SDH-D
Models
GR2SDS
Models
GR2SDS-D
Models
PRODUCT SPECS
Designer Merchandising Warmer
The Designer Merchandising Warmer shall be a Glo-Ray®Model ....as
manufactured by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 service (U.S. and Canada only), the warmer shall be rated at
....watts, ....volts, and be ....inches (millimeters) in overall width. It shall
consist of a thermostatically-controlled heated base, infrared heat from
above, full-view tempered glass sides, Designer color inset panels, and
incandescent display lights.
The infrared heating element shall be tubular metal sheathed
and the warmer shall have a cord with plug attached.
Accessories shall include additional stainless steel dividers rods, flip-up
doors, display sign holder, and control covers.
ACCESSORIES
❑ Additional Stainless Steel Divider Rods
❑ Flip-up Doors
❑ Control Covers
❑ Display Sign Holder (Signs not included)
GLO-RAY ®
DESIGNER MERCHANDISING WARMERS
Models GR2SDH-24, -30, -36, -42, -48, -54, -60 GR2SDH-24D, -30D, -36D, -42D, -48D, -54D, -60D
GR2SDS-24, -30, -36, -42, -48, -54, -60 GR2SDS-24D, -30D, -36D, -42D, -48D, -54D, -60D
SPECIFICATIONS
Horizontal Models
Model▲•Watts Width Shipping Weight
GR2SDH-24 820 301⁄8" ( 765 mm) 87 lbs. ( 40 kg)
GR2SDH-30 1020 361⁄8" ( 918 mm) 120 lbs. ( 55 kg)
GR2SDH-36 1220 421⁄8" (1070 mm) 129 lbs. ( 59 kg)
GR2SDH-42 1490 481⁄8" (1222 mm) 138 lbs. ( 63 kg)
GR2SDH-48 1690 541⁄8" (1375 mm) 160 lbs. ( 73 kg)
GR2SDH-54 1890 601⁄8" (1527 mm) 172 lbs. ( 78 kg)
GR2SDH-60 2210 661⁄8" (1680 mm) 187 lbs. ( 85 kg)
GR2SDH-24D 1640 301⁄8" ( 765 mm) 150 lbs. ( 68 kg)
GR2SDH-30D 2040 361⁄8" ( 918 mm) 178 lbs. ( 81 kg)
GR2SDH-36D 2440 421⁄8" (1070 mm) 198 lbs. ( 90 kg)
GR2SDH-42D 2980 481⁄8" (1222 mm) 218 lbs. ( 99 kg)
GR2SDH-48D 3380 541⁄8" (1375 mm) 238 lbs. (108 kg)
GR2SDH-54D 3780 601⁄8" (1527 mm) 258 lbs. (117 kg)
GR2SDH-60D 4420 661⁄8" (1680 mm) 280 lbs. (127 kg)
Dual Shelf Single Shelf
Slant Models
Model▲•Watts Width Shipping Weight
GR2SDS-24 820 301⁄8" ( 765 mm) 104 lbs. ( 47 kg)
GR2SDS-30 1020 361⁄8" ( 918 mm) 116 lbs. ( 53 kg)
GR2SDS-36 1220 421⁄8" (1070 mm) 136 lbs. ( 62 kg)
GR2SDS-42 1490 481⁄8" (1222 mm) 155 lbs. ( 70 kg)
GR2SDS-48 1690 541⁄8" (1375 mm) 164 lbs. ( 74 kg)
GR2SDS-54 1890 601⁄8" (1527 mm) 182 lbs. ( 83 kg)
GR2SDS-60 2210 661⁄8" (1680 mm) 202 lbs. ( 92 kg)
GR2SDS-24D 1640 301⁄8" ( 765 mm) 162 lbs. ( 74 kg)
GR2SDS-30D 2040 361⁄8" ( 918 mm) 174 lbs. ( 79 kg)
GR2SDS-36D 2440 421⁄8" (1070 mm) 190 lbs. ( 86 kg)
GR2SDS-42D 2980 481⁄8" (1222 mm) 218 lbs. ( 99 kg)
GR2SDS-48D 3380 541⁄8" (1375 mm) 240 lbs. (109 kg)
GR2SDS-54D 3780 601⁄8" (1527 mm) 260 lbs. (118 kg)
GR2SDS-60D 4420 661⁄8" (1680 mm) 296 lbs. (135 kg)
Dual Shelf Single Shelf
▲When no color is specified, color inset panels will be black, corner caps will be dark gray.
• NSF requires units over 36" (914 mm) in width or weighing more than 80 lbs. (36 kg) to be
either sealed, or raised on the installation surface with the 4" (102 mm) legs included.
233⁄4" to 593⁄4"
(603 to 1518 mm)
301⁄8" to 661⁄8" (765 to 1680 mm)
18"
(457 mm)
8"
(203 mm) 22" (559 mm)
27" (686 mm)
FRONT VIEW SIDE VIEW
233⁄4" to 593⁄4"
(603 to 1518 mm)
233⁄4" to 593⁄4"
(603 to 1518 mm)
301⁄8" to 661⁄8" (765 to 1680 mm)
29"
(737 mm)
8"
(203 mm) 22" (559 mm)
22" (559 mm)
27" (686 mm)
FRONT VIEW SIDE VIEW
333⁄8"
(848 mm)
FRONT VIEW
SIDE VIEW
8"
(203 mm)
22" (559 mm)
22" (559 mm)
265⁄8" (676 mm)
233⁄4" to 593⁄4"
(603 to 1518 mm)
233⁄4" to 593⁄4"
(603 to 1518 mm)
301⁄8" to 661⁄8" (765 to 1680 mm)
NEMA L14-20PNEMA 5-20P NEMA 5-30P
CEE 7/7 Schuko
NEMA 5-15P
NEMA L14-30P BS-1363
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [email protected]
Printed in U.S.A.
Form No. GR2SD Spec Sheet April 2007