Hatco Glo-Ray GRSDH-24 User manual

ITEM#
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
( 00) 55 -0607 • [phone] • Fax ( 00) 543-7521 • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [e-mail]
Form No. GRSD Spec Sheet
GLO-RAY®
MERCHANDISING DISPLAY WARMERS
Models GRSDH-24, -30, -36, -41, -52, -60 GRSDH-24D, -30D, -36D, -41D, -52D, -60D GRSDS-24, -30, -36, -41, -52, -60
GRSDS-24D, -30D, -36D, -41D, -52D, -60D, -24T, -36T GRSDS/H -30D, -36D, -41D, -30DHW, -36DHW, -41DHW
The perfect unit to merchandise hot
fast foods is the Hatco Glo-Ray
Merchandising Display Warmer.
Designed specifically to hold hot
wrapped or boxed product, this unit
holds hot food safely at proper serving
temperatures. Glo-Ray Merchandising
Warmers have prefocused infrared top
heat and a thermostatically-controlled
hardcoated heated base to extend the
holding times of most food.
Hardcoated shelves, adjustable dividers,
shatter-resistant incandescent display
lights, and 6' (1829 mm) cord with plug
are standard.
FLEXIBILITY
This warmer offers the convenience
of self-serve and the efficiency of
kitchen-to-server holding.
Available with horizontal shelves, the
Glo-Ray Merchandising Warmers are
offered in both single and dual shelf
models. Slant shelves are offered in
single, dual and triple shelf models. All
models are made of extruded aluminum
and sturdy stainless steel with tempered
glass end panels. Specially coated
incandescent lights illuminate the food
holding area.
Designed with a slanted base and
horizontal shelf, the GRSDS/H series
is ideal for holding popcorn on the top
shelf and nachos, boxed pizza, or
wrapped sandwiches on the bottom
shelf. Alternative control locations make
placement of merchandiser on front
or back serving counters possible.
An optional high wattage top shelf is
ideal for holding fried foods and an
optional top shelf clearance of 15"
(381 mm) is also available.
Slant models 30" (762 mm) and
wider will accommodate 18" x 26"
(457 x 660 mm) sheet pans.
QUALITY
The following features assure the finest
performance for years to come:
• All models have prefocused infrared
top heat directing heat to the outer
edges of the holding surface where
heat loss is the greatest.
• These warmers feature a
thermostatically-controlled, hardcoated
heated base and a cord and plug set.
• Coated shatter-resistant incandescent
lights enhance product display while
safeguarding food products from
bulb breakage.
• An optional Indicating Temperature
Control enhances accurate control
of temperature and provides digital
readout of temperature.
METAL SHEATHED HEATING ELEMENTS GUARANTEED
AGAINST BURNOUT AND BREAKAGE FOR TWO YEARS,
BLANKET ELEMENTS FOR ONE YEAR.
Model GRSDH-36
horizontal single shelf
Model GRSDS-30D dual
slant shelf with optional
backlit merchandising
sign and accessory
display sign holder
(signs not included)
Model GRSDS/H-36D
with slant shelf and
horizontal shelf
Model GRSDS/H-36DHW
with slant shelf and
horizontal shelf
Divider Rods
Model Width No. of Divider Rods Average Chute Width
Provided per Shelf
24" ( 610 mm) 5 Rod 33⁄4" ( 95 mm)
30" ( 762 mm) 6 Rod 41⁄4" (108 mm)
36" ( 914 mm) 7 Rod 41⁄2" (114 mm)
41" (1041 mm) 8 Rod 41⁄2" (114 mm)
52" (1321 mm) 10 Rod 45⁄8" (117 mm)
60" (1524 mm) 12 Rod 41⁄2" (114 mm)
Printed in U.S.A.
September 2007

Slant Models Slant / Horizontal Models
OPTIONS (NOT FOR RETROFIT)
❑Designer Colors: Warm Red, Black, Gray Granite,
White Granite, Navy Blue, Hunter Green
❑Indicating Temperature Control (ITC)
❑Stainless Steel End Panels (In lieu of Glass End Panels)
❑Breath Protector on Customer Side
❑15" (381 mm) Clearance Top Shelf (GRSDS/H models)
❑Halogen Bulbs in lieu of Standard Display Lights
ITEM#
24" to 60" (610 to 1524 mm)
FRONT VIEW
251⁄2"
(648 mm
121⁄8"
(308 mm) 71⁄8"
(181 mm)
71⁄8"
(181 mm)
191⁄2" (495 mm)
SIDE VIEW
3"
(76 mm)
24" to 60" (610 to 1524 mm)
FRONT VIEW
323⁄8"
(911 mm)
437⁄8"
(1114 mm)
175⁄8"
(448 mm)
81⁄4"
(210 mm)
81⁄4"
(210 mm)
241⁄4"(616 mm)
SIDE VIEW
81⁄4"
(210 mm)
3"
(76 mm)
PRODUCT SPECS
Merchandising Warmer
The Merchandising Warmer shall be a Glo-Ray®Model ....as manufactured
by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.
With 24/7 service (U.S. and Canada only), the warmer shall be rated at
....watts, ....volts, and be ....inches (millimeters) in overall width. It shall
consist of a thermostatically-controlled, hardcoated heated base, infrared
heat from above, full view tempered glass sides, adjustable divider rods,
and incandescent display lights.
The infrared heating element shall be tubular metal sheathed and the
warmer shall have a cord with plug attached.
Accessories shall include backlit sign holder (slant models, top shelf only),
display sign holders, and additional stainless steel dividers rods.
ACCESSORIES
❑Flip-up Doors on One Side (24" thru 41"W (610-1041 mm) models)
❑ Split Flip-up Doors on One Side (52" and 60"W (1321-1524 mm) models)
❑Backlit Sign Holder (Signs not included) – 120V 30"-52"
(762-1321 mm) Slant Models, Top Shelf Only
❑Display Sign Holder (Signs not included) – Top or Intermediate Shelf
❑4" (102 mm) Adjustable Legs (Standard on units over 36"
(914 mm) in length or weighing more than 80 lbs. (36 kg))
❑Additional Stainless Steel Divider Rods
DIMENSIONS
Horizontal Models –
Single: 24"-36"W x 191⁄2"D x 121⁄8"H (610-914 x 495 x 308 mm).
41"-60"W x 191⁄2"D x 151⁄8"H* (1041-1524 x 495 x 384 mm).
Dual: 24"-60"W x 191⁄2"D x 251⁄2"H* (610-1524 x 495 x 648 mm).
Slant Models –
Single: 24"-30"W x 24"D x 175⁄8"H (610-762 x 610 x 448 mm).
36"-60"W x 24"D x 205⁄8"H* (914-1524 x 610 x 524 mm).
Dual: 24"-60"W x 24"D x 323⁄8"H* (610-1524 x 610 x 911 mm).
Triple: 24"-357⁄8"W x 241⁄4"D x 437⁄8"H* (610-914 x 616 x 1114 mm).
Slant/Horizontal Models –
Dual: 30"-41"W x 24"D x 321⁄2"H* (762-1041 x 610 x 826 mm).
*Includes 4" (102 mm) legs which add 3" (76 mm) to height of unit.
VOLTAGE
GRSDH-24 to -52, GRSDS-24 to -60, GRSDH-24D, GRSDS-24D,
GRSDS-30D, and GRSDS/H-30D: 120 volts, single phase
(uses NEMA 5-15P; GRSDH-52, GRSDH-24D GRSDS-60,
GRSDS-30D, and GRSDS/H-30D use NEMA 5-20P for Canada).
GRSDH-30D, GRSDS-36D, and GRSDS/H-36D: 120 volts, single
phase (uses NEMA 5-20P).
GRSDS-24T: 120 volts, single phase (uses NEMA 5-20P).
GRSDS-36T: 120/208-240 volts, single phase, (uses NEMA L14-20P).
GRSDH-60, GRSDH-36D to -60D, GRSDS-41D to -60D and
GRSDS/H-41D, -30DHW, -36DHW, -41DHW: 120/208 or
120/240 volts, single phase, 4-wire (uses NEMA L14-20P).
Export voltages available.
CORD LOCATION
GRSDH: Left rear corner toward server side.
GRSDS: Control side at right base corner.
GRSDS/H: Control side at right base corner.
PLUG CONFIGURATIONS
SPECIFICATIONS
Horizontal Models – Single Shelf
Model Width Watts Amps★Shipping Weight
GRSDH-24 24" ( 610 mm) 830 6.9 51 lb . (23 kg)
GRSDH-30 30" ( 762 mm) 970 8.1 58 lb . (26 kg)
GRSDH-36 36" ( 914 mm) 1170 9.8 66 lb . (30 kg)
GRSDH-41▲41" (1041 mm) 1340 11.2 74 lb . (34 kg)
GRSDH-52▲52" (1321 mm) 1760 14.7 86 lb . (39 kg)
GRSDH-60▲60" (1524 mm) 2100 15.0†198 lb . (90 kg)‡
GLO-RAY®
MERCHANDISING DISPLAY WARMERS
Models GRSDH-24, -30, -36, -41, -52, -60 GRSDH-24D, -30D, -36D, -41D, -52D, -60D GRSDS-24, -30, -36, -41, -52, -60
GRSDS-24D, -30D, -36D, -41D, -52D, -60D, -24T, -36T GRSDS/H -30D, -36D, -41D, -30DHW, -36DHW, -41DHW
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • ( 00) 55 -0607 • [phone]
Fax ( 00) 543-7521 • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [e-mail]
Printed in U.S.A.
Form No. GRSD Spec Sheet September 2007
Horizontal Models
30" to 41"
(762 to 1041 mm)
FRONT VIEW
321⁄2"
(826 mm)
12"
(305 mm)
103⁄8"
(264 mm)
24"
(610 mm)
SIDE VIEW
★Based on 120 volts.
▲NSF requires units over 36" (914 mm) in width or weighing more than
80 lbs. (36 kg) to be either sealed, or raised on the installation surface
with the 4" (102 mm) legs included.
†Based on 120/208 volts, 120/240 volts.
Includes crating.
•Not available in Canada.
◆High wattage on top shelf only.
Horizontal Models – Dual Shelf
Slant Models – Dual Shelf
Model Width Watts Amps★Shipping Weight
GRSDH-24D▲24" ( 610 mm) 1660 13.8 90 lb . ( 41 kg)
GRSDH-30D▲30" ( 762 mm) 1920 16.0 100 lb . ( 45 kg)
GRSDH-36D▲36" ( 914 mm) 2340 9.8†112 lb . ( 51 kg)
GRSDH-41D▲41" (1041 mm) 2680 11.2†126 lb . ( 57 kg)
GRSDH-52D▲52" (1321 mm) 3520 14.7†150 lb . ( 68 kg)
GRSDH-60D▲60" (1524 mm) 4200 17.5†268 lb . (122 kg)‡
Model Width Watts Amps★Shipping Weight
GRSDS-24D▲24" ( 610 mm) 1355 11.3 128 lb . ( 58 kg)
GRSDS-30D▲30" ( 762 mm) 1530 12.8 140 lb . ( 64 kg)
GRSDS-36D▲36" ( 914 mm) 1810 15.1 158 lb . ( 72 kg)
GRSDS-41D▲41" (1041 mm) 2120 9.1†178 lb . ( 81 kg)
GRSDS-52D▲52" (1321 mm) 2725 11.7†205 lb . ( 93 kg)
GRSDS-60D▲60" (1524 mm) 3340 14.3†238 lb . (108 kg)
Slant / Horizontal Models – Dual Shelf
Model Width Watts Amps Shipping Weight
GRSDS/H-30D▲30" ( 762 mm) 1530 12.8★140 lb . (64 kg)
GRSDS/H-36D▲36" ( 914 mm) 1810 15.1★158 lb . (72 kg)
GRSDS/H-41D▲41" (1041 mm) 2120 9.1†178 lb . (81 kg)
GRSDS/H-30DHW▲◆30" ( 762 mm) 2450 13.8†140 lb . (64 kg)
GRSDS/H-36DHW▲•◆36" ( 914 mm) 2910 16.4†158 lb . (72 kg)
GRSDS/H-41DHW▲•◆41" (1041 mm) 3460 17.3†178 lb . (81 kg)
Model Width Watts Amps★Shipping Weight
GRSDS-24 24" ( 610 mm) 695 5.8 72 lb . (33 kg)
GRSDS-30 30" ( 762 mm) 790 6.6 80 lb . (36 kg)
GRSDS-36▲36" ( 914 mm) 935 7.8 92 lb . (42 kg)
GRSDS-41▲41" (1041 mm) 1090 9.1 96 lb . (44 kg)
GRSDS-52▲52" (1321 mm) 1400 11.7 102 lb . (46 kg)
GRSDS-60▲60" (1524 mm) 1715 14.3 108 lb . (49 kg)
Slant Models – Single Shelf
NEMA L14-20PNEMA 5-20P
CEE 7/ 7 Schuko
NEMA 5-15P
BS-1363
Slant Models – Triple Shelf
Model Width Watts Amps★Shipping Weight
GRSDS-24T▲24" ( 610 mm) 2015 16.8 183 lb . ( 83 kg)
GRSDS-36T▲36" ( 914 mm) 2685 14.6 225 lb . (102 kg)