ITEM#
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
( 00) 55 -0607 • (414) 671-6350 • Fax ( 00) 543-7521 • Int’l. Fax (414) 671-3976
www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. MN Spec Sheet
MACHO NACHO™
CHIP WARMERS
Models FDW-1-MN, FST-1-MN
The Hatco Macho Nacho Holding and
Display Cabinet is a high-visibility
merchandiser for warming and displaying
nacho chips. These heated displays use
no humidity and hold up to 2 lbs. (11 kg)
or 40 lbs. (18 kg) of chips, keeping them
hot, fresh, and crisp considerably longer
than other warmers, reducing refill time
and minimizing waste.
The unique air flow forces warm air to
the bottom and is distributed into the
cabinet through holes in the floor panels,
directing maximum heat to the chips
being served. Macho Nacho circulates
air to prevent the loss of natural oils,
eliminating the need to frequently
replace stale chips.
Built of stainless steel or aluminum
with tempered glass sides and doors,
Macho Nacho features a stainless steel
front housing, painted top, and eye
catching decals.
FLEXIBILITY
Macho Nacho’s two-door access permits
easy loading and serving. Chips flow to
the front of the cabinet when loading
through the upper door and the heated,
slanted floor panel slides the hot chips
to the lower door for serving.
The user-friendly control panel makes
it easy to operate and only minimum
maintenance is required. The chip slide
and floor panels are removable for ease
of cleaning.
QUALITY
The following features assure the finest
performance for years to come:
• Built of stainless steel or aluminum
with tempered glass sides and doors.
• Shatter-resistant incandescent
lights enhance food appeal while
safeguarding food products from
bulb breakage.
• Snappy graphic decals for three sides
help promote product.
• Anodized bronze finish is standard on
the FST model.
• All models come with 6' (1829 mm)
cord and plug.
METAL SHEATHED AIR HEATING ELEMENTS
GUARANTEED AGAINST BURNOUT AND BREAKAGE
FOR TWO YEARS.
Model FDW-1-MN
Model FST-1-MN
with standard
bronze finish
Printed in U.S.A.
September 2007
