Hawking HPOW10D User manual

High Power Outdoor WiFi
Directional Access Point / Bridge
Dual Radio Wireless Repeater
High Power Outdoor WiFi Directional Access Point / Bridge
Hawking Technology's HPOW10D puts multiple solutions into one weather proof outdoor
unit. The High Power Outdoor WiFi Directional Access Point / Bridge functions as an Outdoor
Access Point, Universal Repeater or Ethernet Bridge. Additionally, the internal 10dBi MiMO
Directional antenna provides focused directional coverage, perfect for point to point solutions.
It features a Power over Ethernet connection and includes wall and pole mounting kits for
easy installation and setup.
Outdoor Wireless-N Access Point Mode:
Create a wireless network in an outdoor or indoor location by setting the HPOW10D in Access Point mode. In Access Point mode
the HPOW10D enables wireless access to any existing wired networking.
Outdoor Wireless-N Bridge Mode:
Enable any wired Ethernet-ready device or existing wired network to connect to your existing wireless network using the
HPOW10D. Wirelessly connect the network of your remote office building to your main office building easily by setting the
HPOW10D in Bridge Mode.
Outdoor Wireless-N Universal Repeater Mode:
Repeat the wireless signal from your existing network and extend the total wireless range of your network to an outdoor location.
Setting up the HPOW10D in Universal Repeater mode allows you to extend the range from an indoor or outdoor Wi-Fi network to
your desired new location.
Features
800mW of High Power WiFi networking for Outdoors
Features multiple operating modes and Power over Ethernet
Setup Utility allows for easy configuration of multiple outdoor access points
Built-In 10dBi MiMO Directional Antennas
Heavy duty, weatherproof design
PACKAGE CONTENTS:
One High Power Outdoor WiFi Directional Access Point / Bridge
One Power over Ethernet Adapter (PoE) w/AC Power Adapter
One RJ-45 Ethernet Cable
One Wall/Pole Mounting Kit
One Setup CD
One Quick Installation Guide (QIG)
MODEL: HPOW10D
HIGH POWER POINT-TO-POINT OUTDOOR
WIFI COVERAGE SOLUTION!

High Power Outdoor WiFi
Directional Access Point / Bridge
HPOW10D
High Power Outdor WiFi
Directional Access Point / Bridge
MODEL: HPOW10D
High Power Outdoor WiFi
Directional Access Point / Bridge
HPOW10D
Wireless Laptop
Computer
Wireless Desktop
Computer
Wireless Workgroup
(Bridge)
Wireless Access Point Mode
Add outdoor wireless access
to any existing wired network
High Power Outdoor WiFi
Directional Access Point / Bridge
HPOW10D
Universal Repeater Mode
Extend the range of any
Wireless b/g/n network
Wireless Laptop
Computer
Wireless Desktop
Computer
Any Ethernet
Ready Device
Access Point
or Router
High Power Outdoor WiFi
Directional Access Point / Bridge
HPOW10D
or
or
or
Network Bridging Mode
Wirelessly connect one network
or device to another wireless
network
EASY INSTALLATION WITH POWER OVER ETHERNET
By combining your power and data connections into a single cable, PoE simplifies the setup
of the High Power Outdoor WiFi Directional Access Point/Bridge. The included Power over
Ethernet DC Injector provides power and network access (through your home or business
router or network connection) and combines them into a single RJ-45 connection for the
HPOW10D. This allows you to install the HPOW10D outdoors in hard to reach locations
without worrying about running both power and Ethernet cables.
Power over Ethernet (PoE) Adapter Included
Data/Power
Network
Power
PoE
• Capable of Multiple Operating Modes including Access Point,
Ethernet Bridge and Universal Repeater
• Utilizes Power over Ethernet for (PoE) outdoor installations!
• Weatherproof design allows for installations in any outdoor environment
•
Wall mounting and pole mounting kit included
• Power over Ethernet Injector included for initial configuration
PRIMARY OPERATING MODES
Focused Networking Coverage

MODEL: HPOW10D
High Power Outdoor WiFi
Directional Access Point / Bridge
POWER ON & CONNECT!
It’s easy to install, it’s easy to use! Everyone can do it.
MOUNTING OPTIONS
HAWKING TECHNOLOGIES, INC. IRVINE, CA 92618
SALES: [phone] FAX: [phone]
E-MAIL: [email protected] TECHNICAL SUPPORT: techsuppor[email protected]
The HPOW10D is complete with both Pole and Mounting Hardware.
STEP 1: Power on the Access Point
Use the included Power over
Ethernet Injector to connect
the HPOW10D to your
network and a power source.
STEP 2: Configure the Access Point
Configuration can be
completed from any device
with a web browser. Simply
log into the setup page and
select your settings.
STEP 3: Mount the Access Point
Find a safe location to mount
the High Power Outdoor WiFi
Directional Access
Point/Bridge. For the best
point to point coverage, use
two HPOW10Ds facing each
other.
SPECIFICATIONS:
Modem Specifications:
Operating Modes:
Wireless-300N Access Point
Wireless-300N Ethernet Bridge
Wireless-300N Universal Repeater
Wireless-300N Point to Point Access Point
Wireless-300N Point to Multipoint Access Point
Wireless-300N WDS Repeater
Network Specifications:
IEEE 802.11b/g/n
10dBi Built-In MiMO Directional Antenna
800mW Max 2.4GHz Wireless Transmission
Power
Supports WEP, WPA, WPA2 Wi-Fi Security
Network Management
Setup Utility (Browser Based)
Web Based Management Interface
Hardware Specifications:
Ports
Two 10/100 Mbps Ethernet Ports (PoE Pass
Through)
Power
Power Over Ethernet Adapter (POE)
Dimension / Weight
HPOW10D 6.5 (H) X 3.75 (L) X 2 (W) inches /
0.77lbs
Temperature
Operating: -4~140˚F , Storage: -40~176˚F
Humidity
Operating: 100% (Non-Condensing)
Storage: 100% (Non-Condensing)
System Requirements
Windows XP + or Mac OS X +
Internet web browser (Internet Explorer 4.0
or better, Safari, Mozilla, etc.)
Ethernet Cable to connect device to PoE
(length will vary depending on installation
environment)
A home or business network
Power over Ethernet (PoE) Adapter Included
Data/Power
Network
Power
PoE
For Wall Mounting, locate the included
bracket inside the packaging. Use the
included hardware to mount the bracket to
the wall. Once your bracket is secure, Click
the HPOW10D into place via the rear pole
mount extension.
For Pole Mounting, use the
included hardware and thread the
mounting tie straps through the
rear HPOW10D extension and
around your pole.Thread the end
through the lock head and secure
at your preferred height.