Hawking HDWABN1 User manual

COPYRIGHT
Copyright ©2008/2009 by Hawking Technologies, Inc. All rights reserved. No
part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language or computer language, in any
form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of this company
This company makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties, merchantability or fitness for any particular purpose. Any software
described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not this company, its
distributor, or its dealer) assumes the entire cost of all necessary servicing,
repair, and any incidental or consequential damages resulting from any defect
in the software. Further, this company reserves the right to revise this
publication and to make changes from time to time in the contents thereof
without obligation to notify any person of such revision or changes.
LIMITED WARRANTY
Hawking Technology guarantees that every HOWABN1Hi-Gain
Wireless-300N Hi-Gain Outdoor Wireless-N Access Point/Bridge is free from
physical defects in material and workmanship under normal use for one (1)
year from the date of purchase. If the product proves defective during this
one-year warranty period, call Hawking Customer Service in order to obtain a
Return Authorization number. Warranty is for repair or replacement only.
Hawking Technology does not issue any refunds. BE SURE TO HAVE
YOUR PROOF OF PURCHASE. RETURN REQUESTS CAN NOT BE
PROCESSED WITHOUT PROOF OF PURCHASE. When returning a
product, mark the Return Authorization number clearly on the outside of the
package and include your original proof of purchase.
IN NO EVENT SHALL HAWKING TECHNOLOGY’S LIABILTY EXCEED THE
PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE OR ITS
DOCUMENTATION. Hawking Technology makes no warranty or

representation, expressed, implied or statutory, with respect to its products or
the contents or use of this documentation and all accompanying software, and
specifically disclaims its quality, performance, merchantability, or fitness for
any particular purpose. Hawking Technology reserves the right to revise or
updates its products, software, or documentation without obligation to notify
any individual or entity. Please direct all inquiries to:
[e-mail]
Federal Communication Commission
Interference Statement
FCC Part 15
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm spacing must be provided between computer
mounted antenna and person’s body (excluding extremities of hands, wrist and feet)

during wireless modes of operation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
Federal Communication Commission (FCC) Radiation Exposure
Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches)
during normal operation.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
The equipment version marketed in US is restricted to usage of the channels 1-11
only.

R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF
THE EUROPEAN PARLIAMENTAND THE COUNCIL of March 9, 1999 on radio
equipment and telecommunication terminal Equipment and the mutual recognition of
their conformity (R&TTE).
The R&TTE Directive repeals and replaces in the directive 98/13/EEC
(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As
of April 8, 2000.
Safety
This equipment is designed with the utmost care for the safety of those who install
and use it. However, special attention must be paid to the dangers of electric shock
and static electricity when working with electrical equipment. All guidelines of this
and of the computer manufacture must therefore be allowed at all times to ensure the
safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use inAustria,
Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg,
the Netherlands, Portugal, Spain, Sweden, and the United Kingdom.
The ETSI version of this device is also authorized for use in EFTA member states:
Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries Not intended for use
None.

Contents
Chapter I: Product Information................................................................1
1-1 Product Introduction........................................................................................1
1-2 System Requirements......................................................................................2
1-3 Package Contents.............................................................................................3
1-4 Familiar with your new wireless Hi-Gain Outdoor Wireless-N Access Point 4
Chapter II: System and Network Setup ....................................................5
2-1 Installing the Hi-Gain Outdoor Wireless-N Access Point to your Network....5
2-2 Connecting to wireless Hi-Gain Outdoor Wireless-N Access Point by web
browser.................................................................................................................13
2-2-1 Windows 95/98/Me IP address setup ............................................................. 13
2-2-2 Windows 2000 IP address setup..................................................................... 15
2-2-3 Windows XP IP address setup........................................................................ 17
2-2-4 Windows Vista IP address setup..................................................................... 20
2-2-5 Connecting to Web Management Interface.................................................... 22
2-3 View System Status and Information ............................................................24
2-4 Select an Operating Mode for Wireless Hi-Gain Outdoor Wireless-N Access
Point.....................................................................................................................26
2-4-1 AP Mode......................................................................................................... 29
2-4-1-1 Multiple ESSID .......................................................................................... 30
2-4-2 Station-Infrastructure ..................................................................................... 32
2-4-2-1 Wireless Site Survey................................................................................... 34
2-4-3 AP Bridge-Point to Point Mode ..................................................................... 36
2-4-4 AP Bridge-Point to Multi-Point Mode........................................................... 39
2-4-5 AP Bridge-WDS Mode .................................................................................. 41
2-4-6 Universal Repeater......................................................................................... 43
2-5 WPS Setting...................................................................................................47
2-6 Advanced Wireless Settings...........................................................................51
2-7 Wireless Security...........................................................................................54
2-7-1 Disable Security............................................................................................. 56
2-7-2 WEP............................................................................................................... 57
2-7-3 WPA Pre-shared Key...................................................................................... 59
2-7-4 WPA RADIUS................................................................................................ 61
2-7-5 802.1x Authentication.................................................................................... 63
2-8 Radius Server.................................................................................................65
2-9 MAC Filtering ...............................................................................................68

2-10 System Utilities............................................................................................71
2-10-1 Change Password......................................................................................... 71
2-10-2 IPAddress of the Wireless Hi-Gain Outdoor Wireless-N Access Point....... 73
2-10-3 DHCP Server................................................................................................ 76
Chapter III: Advanced Configuration ....................................................78
3-1 Configuration Backup and Restore................................................................78
3-2 Firmware Upgrade.........................................................................................80
3-3 System Reset..................................................................................................81
Chapter IV: Appendix ..............................................................................83
4-1 Hardware Specification .................................................................................83
4-2 Troubleshooting.............................................................................................84
4-3 Glossary.........................................................................................................86

1
Chapter I: Product Information
1-1 Product Introduction
Thank you for purchasing the Hawking Technologies Hi-Gain Outdoor
Wireless-N Access Point! This Hi-Gain Outdoor Wireless-N Access Point
is designed for outdoor use and designed for building an outdoor wireless
network. The Hi-Gain Outdoor Wireless-N Access Point features MIMO
technology (multiple in, multiple out), and two Hi-Gain outdoor antennas
for maximizing wireless range.
Product Features
Complies with the IEEE 802.11b/g/n standards.
Supports 2.4000~2.4835GHz frequency band.
High data rate up to 300Mbps network speed.
Auto rate fallback in case of obstacles or interferences.
Supports point-to-point and point-to-multi point bridge function.
Supports WDS (Wireless Distributed System) repeater mode.
Supports Universal Repeater mode.
Supports AP Client mode.
Supports four sets of ESSID to group the different wireless networks.
Supports WEP, WPA, WPA2 wireless security and RADIUS server
authorization function.
Supports WPS (Wi-Fi Protected Setup) function.
Provides MAC access control.
Supports Web-based configuration.
Fault Tolerance Firmware upgrade via Web browser.
Complies with IEEE 802.3af Powered Device (PD) standard.
Complies with IP67 standard for outdoor use.
Supports wall/pole mounting.

2
1-2 System Requirements
Computer or network devices with wired or wireless network interface
card.
Web browser (Microsoft Internet Explorer 4.0 or above, Netscape
Navigator 4.7 or above, Opera web browser, or Safari web browser).
An availableAC power socket (100 – 240 V, 50/60Hz)

3
1-3 Package Contents
Before you start to use this access point, please check if there’s anything
missing in the package, and contact your dealer of purchase to claim for
missing items:

4
1-4 Product Overview
Item Name Description
Antenna 1 Main antenna for transmitting and receiving 802.11b/g/n
Wi-Fi signals. N-Type antenna connector compatible
with N-Type Hi-Gain Antennas for more range.
PoE Ethernet
Port 10/100 Mbps Local Area Network port with PoE capabilities
Antenna 2 Secondary antenna. N-Type antenna connector
compatible with N-Type Hi-Gain Antennas for more
range.
Antenna Port
Power over Ethernet Port
Connect to the included PoE adapter or a PoE
switch using a Cat5 Ethernet Cable
Antenna Port

5
Chapter II: System and Network Setup
2-1 Installing the Hi-Gain Outdoor Wireless-N Access Point to your
Network
Antenna Installation
1. Remove the covers from the antenna connectors.
2. Screw the N-Type connector to the antenna connector 2.
3. Screw the antennas to these two connectors.
4. Adjust the two antennas to place at a vertical angle.

6
Pole/Mounting Installation
HI-GAIN OUTDOOR WIRELESS-N ACCESS POINT * 1PCS
POLE
SQUARE NUT * 2PCS HOSE CLAMP 2 * 1PCS
M5-12 SCREW * 2PCS WALL SCREW * 2PCS
M SHAPE MOUNTING * 1PCS WALLANCHOR * 2PCS
WALL
Pole Mounting
1
2
3
4
5
6
8
7
9

7
Wall Mounting
Ethernet Cable Waterproof Installation
1. SEALING NUT * 1PCS 3. SEAL * 1PCS
2. BODY * 1PCS 4. RUBBER WASHER * 1PCS
1 2
43

8
1. Put the Ethernet Cable into the sealing nut (1).
2. Open the seal (3) and clip to the cable.
3. Put the body (2) to into the cable and then secure the seal (3) to the
body (2).
4. Screw the body (2) and the sealing nut (1).

9
5. Put the rubber washer (4) into the Ethernet connector of the Hi-Gain
Outdoor Wireless-N Access Point.
6. Plug the cable into the Ethernet port of the Hi-Gain Outdoor
Wireless-N Access Point.

10
7. Screw the body (2) to the Ethernet connector of the Hi-Gain Outdoor
Wireless-N Access Point.
Power Installation
1. Connect one end of the Ethernet cable to the LAN port of the Hi-Gain
Outdoor Wireless-N Access Point, and the other end of the Ethernet
cable to the port labeled ’Power+DATA OUT’ on the Power Over
Ethernet Power over Ethernet DC Injector.
2. Connect another Ethernet cable from the port labeled ‘LAN’ on the
Power Over Ethernet Power over Ethernet DC Injector to your
router/switch or to a PC.
3. Connect the power adapter to the connector on the Power over
Ethernet DC Injector.
4. Connect the power cord to the power adapter and into an electrical
outlet.
Note: You must use the power adapter shipped along with the Hi-Gain

11
Outdoor Wireless-N Access Point, do NOT use any other power adapter
from other sources.

12
Step 1
Step 2
Step 3
Step 4

13
2-2 Connecting to wireless Hi-Gain Outdoor Wireless-N Access
Point by web browser
After the network connection is built, the next step you should do is
setup the Hi-Gain Outdoor Wireless-N Access Point with proper network
parameters, so it can work properly in your network environment.
Please use the web browser to configure the Hi-Gain Outdoor Wireless-N
Access Point. A computer with wired Ethernet connection to the Hi-Gain
Outdoor Wireless-N Access Point is required for this first-time
configuration.
Before you staring to configure the Hi-Gain Outdoor Wireless-N Access
Point, please configure the IP address of the computer in the same
network segment with the Hi-Gain Outdoor Wireless-N Access Point.
If the operating system of your computer is….
Windows 95/98/Me - please go to section 2-2-1
Windows 2000 - please go to section 2-2-2
Windows XP - please go to section 2-2-3
Windows Vista please go to section 2-2-4
2-2-1 Windows 95/98/Me IP address setup
1. Click ‘Start’button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network icon, and
Network window will appear. Select ‘TCP/IP’, then click ‘Properties’.