Haws 3177FR Guide

03/20 Model 3177FR Page 1 of 4
1455 Kleppe Lane Sparks, NV 89431-6467 [phone] Fax [phone]
E-mail: [email protected]  website: www.hawsco.com
No. 0002077325 (13)
Model 3177FR
Drinking Fountain
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
LIMITED WARRANTY
HAWS warrants that this specific product is guaranteed against defective material or
poor workmanship for a period of one year from date of shipment. HAWS liability
under this warranty shall be discharged by furnishing without charge F.O.B. HAWS
Factory any goods, or part thereof, which shall appear to the Company upon
inspection to be of defective material or not of first class workmanship, provided that
claim is made in writing to Haws within a reasonable period after receipt of the
product. Where claims for defects are made, the defective part or parts shall be
delivered to the Company, prepaid, for inspection. HAWS will not be liable for the
cost of repairs, alterations or replacements, or for any expense connected therewith
made by the owner or his agents, except upon written authority from HAWS,
Sparks, Nevada. HAWS will not be liable for any damages caused by defective
materials or poor workmanship, except for replacements, as provided above. Buyer
agrees that HAWS shall not be liable for general, special, or consequential damages
claimed to arise under the contract of sale. The drinking fountain manufactured by
HAWS is warranted to function if installation and maintenance instructions provided
are adhered to. The units also must be used for the purpose for which they were
intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT: 1-800-766-5612
FOR CUSTOMER SERVICE: 1-888-640-4297

03/20 Model 3177FR Page 2 of 4
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable
wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket wrench or open end
wrench.
LOCATION OF UNIT: The Model 3177FR Drinking Fountain is a wheelchair accessible
drinking water facility. The height dimensions shown, meet current ADA requirements. When
installing this unit, local, state or federal codes should be adhered to. If height other than
shown is required, then dimensions must be adjusted accordingly.
SUPPLY LINE: The minimum recommended line size is 1/2“IPS. Flowing pressure is 30-90
psi (2-6 ATM) for Model 3177FR. Where sediment or mineral content is a problem, an inlet
filter is recommended.
PLUMBING CONNECTIONS: Inlet at freeze valve is 1/2” IPS (male). Waste outlet is 1-1/2”
O.D. tailpiece.
MAINTENANCE: Periodically clean the strainer. Refer to 6518FR Operation and
Maintenance Sheet for additional information.
TROUBLESHOOTING 3177FR with 6518FR
PROBLEM
REPAIR CHECKLIST
1.
Insufficient bubbler flow.
1a.
Check that inlet screwdriver stop valve is
wide open. (Customer supplied). Turn
counterclockwise.
b.
Verify minimum 30 PSI flowing supply
pressure.
c.
Clean inlet strainer.
d.
Adjust valve to increase flow. See 6518FR
Valve Manual.
General Notes:
Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to
ensure correct engagement with O-Ring.
For more information about Haws products, see our website: www.hawsco.com
© 2020 Haws®Corporation –All Rights Reserved
HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

1
6VALVE BOX
5
2
3
4
7
ACCESS PLATE
6
PUSH BUTTON ASSY
5
4BUBBLER HEAD
STRAINER ASSY
3
BOTTOM PLATE
2VALVE, FREEZE RESISTANT
1
A
SPACER
7
0005365345
PA3177
5881PBA
5703M
6461
PBM3177
6518FR
PARTS BREAKDOWN
APPROVED
DRAWN
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BYECN NO.
PAGE
DATE
DATE
ECN:
REVISED PER
CHKD
Haws Corporation - All Rights Reserved
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
ITEM DESCRIPTION
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.
PART NO.
D. OLLOM
11/25/95
13
0002077325
3177FR
1:1
11
FV 04/02/20
DP
3 OF 4
PARTS BREAKDOWN
5527
2020
FV
REMOVE INSERT
WITH 5/16 HEX SOCKET
(NOT SUPPLIED)
DETAIL A
ROTATED 90° INTO VIEW
DETAIL OF ITEM 3
1
(NOT SUPPLIED)
ENSURE TUBE IS DISCONNECTED FROM
"PUSH-IN" TYPE CONNECTOR ON PRESSURE
REGULATOR PRIOR TO REMOVAL. APPLY A
DROP OF LOCTITE 222MS ON NOZZLE THREADS
PRIOR TO REASSEMBLING BACK ONTO BUBBLER
HEAD. REATTACH TUBE TO "PUSH-IN" TYPE
CONNECTOR ENSURING IT IS FULLY BOTTOMED
OUT.
1NOTE:
1
**
** REQUIRED - SOLD SEPARATELY

6"
FROST LINE (NOT SUPPLIED).
MAIN SEWER LINE LOCATED BELOW
MINIMUM TO A POROUS GRAVEL FILL OR
[1829mm]. WASTE TO BE 1 1/2" IPS
BURY DEPTHS OF 48"[1219mm] AND 72"
CONCRETE ANCHORS
152mm
5"
127mm
Ø
RECESS
3.2mm
MOUNTING DETAIL
VALVE BOX
GROUND LEVEL
870mm
34.25"
813mm
32"
(SUPPLIED)
MOUNTING BOLTS
4X 1/2-13 UNC
12-1/2"
318mm
241mm
9-1/2"
MOUNTING PLATE
MTG BOLTS
CONCRETE BASE
(NOT SUPPLIED)
RECESSED
5/8"
16mm
4X 1/8"
457mm
ACCESS
PLATES
18"
686mm
27"
686mm
27"
914mm
36"
330mm
13"
356mm
292mm
11-1/2"
14"
30" [762] SQUARE
1/2"-13 UNC
NOTES:
1. -REMOVED-
SPACER
1 1/2" OD
TAILPIECE
(SUPPLIED,
CUT TO FIT)
2 SPACER IS GLUED TO WALL OF PEDESTAL, BUT MAY
BE KNOCKED OFF DURING WASTE ARM ASSEMBLY REMOVAL/REPAIR. ENSURE THAT SPACER IS REPLACED TO KEEP HOSE AND WASTE ARM ALIGNED PROPERLY.
2
BUBBLER HEAD
DISCONNECT
COUPLING TO
REPLACE
APPROVED:
DRAWN:
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
HM
12/01/95
13
0002077325.D
3177FR
1:1
11
FV 04/02/20
DP
4 OF 4
INSTALLATION
5527
2020
FV
6518FR VALVE ASSY
(NOT SUPPLIED)
REQUIRED - SOLD SEPARATELY