Haws 3177FR User manual

3177FR
Pedestal Mounted Drinking Fountain
Bubbler Head
Polished chrome-plated brass bubbler head features an integral
basin shank for added strength, and is equipped with a shielded,
anti-squirt orifice that provides a steady sanitary source of water.
Drain Clean-Out
Top-down access to the drain allows the fountain to be cleaned
without taking the unit apart, which is ideal for outdoor settings
that are high in drain-clogging sediment like leaves, garbage,
and other debris.
All-Weather Capabilities
Fully engineered system with the pneumatic operated
freeze-resistant valve installed below frost line to drain water to
non-freezing depth allowing fountain to function year-round.
Assembly can be lifted to surface and lowered back into casing
for easy maintenance without disturbing the fountain.
Construction
Heavy-duty vibra-cast reinforced concrete construction with
exposed aggregate finish provide a perfect addition to outside
environments, along with vandal-resistant bottom and access
plates for added peace of mind. Stainless steel basin with a
high-polished finish compliments almost any setting, and it also
resists stains and corrosion.
Push Button
Polished chrome-plated push-button requires less than 5 lbs. to
activate.
FEATURES & BENEFITS
oValve Box: Model 6625, ground box with lid, used with
freeze-resistant valve models 6518FR and 6518.2FR.
oConcrete Colors: Haws offers the full palette of L.M. Scofield's
integral admixtures as illustrated on the L.M. Scofield color chart
and the choice of 4 different finishes. White cement is also
available.
OPTIONS
Model 3177FR barrier free, freeze-resistant concrete pedestal
drinking fountain shall include a polished stainless steel basin,
polished chrome-plated brass push-button, polished chrome-plated
brass vandal-resistant bubbler head protected by a hood extension,
polished chrome-plated vandal-resistant waste strainer with
top-down clean-out access, Portland Gray exposed aggregate
concrete finish with wire reinforcement, integral mounting plate,
vandal-resistant stainless steel access plates, and 1-1/2" O.D.
tailpiece.
SPECIFICATIONS
Perfect for either public or private settings, our concrete vibra-cast
series is a great fit in "open-air" environments. Suitable in areas
where weather conditions may be cause for concern, this series
stands strong against any elements. Reinforced concrete
vibra-cast design not only protects from corrosion, its Portland Gray
color makes it recognizable enough to locate without compromising
the outdoor atmosphere. This type of pedestal drinking fountain
may also be placed in a variety of settings such as: parks, schools,
and other recreational outdoor environments where the
temperature may drop into freezing conditions.
Model meets all current Federal Regulations for the disabled
including those in the Americans with Disabilities Act. Haws
manufactures drinking fountains, electric water coolers and electric
drinking fountains to be lead-free by all known definitions including
ANSI/NSF Standard 61, Section 9, California Proposition 65, and
the Federal Safe Drinking Water Act.
APPLICATIONS
1455 Kleppe Lane | Sparks, NV 89431 | [p] 775.359.4712 | [f] 775.359.7424 | [e] [email protected] | www.hawsco.com | 4 March, 2009
DISCLAIMER: Continued product improvements make specifications subject to change without notice. Check www.hawsco.com for the latest product information and updates.

12/06 Model 3177FR/3177.6280FR/3177.6519FR Page 1 of 7
NO. OOO2076521
(
0
)
No. 2077325(5)
1455 Kleppe Lane Sparks, NV 89431-6467 [phone] Fax [phone]
HAWS AG Bachweg 3 CH-3401 Burgdorf Switzerland
Haws Mfg. Pte Lt. 2A Sungei Kadet Drive Singapore 729554
Avlis-Avenido Senador, Testonio Vilela 505 Jardim Aeroporto Itu, S.P. 13304-550 Brasil
E-mail: [email protected]  website: www.hawsco.com
Model 3177FR/3177.6280FR/3177.6519FR
Drinkin
g
Fountain
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
LIMITED WARRANTY
HAWS®warrants that all of its products are guaranteed against defective material
or poor workmanship for a period of one year from date of shipment. HAWS
liability under this warranty shall be discharged by furnishing without charge F.O.B.
HAWS Factory any goods, or part thereof, which shall appear to the Company
upon inspection to be of defective material or not of first class workmanship,
provided that claim is made in writing to company within a reasonable period after
receipt of the product. Where claims for defects are made, the defective part or
parts shall be delivered to the Company, prepaid, for inspection. HAWS will not be
liable for the cost of repairs, alterations or replacements, or for any expense
connected therewith made by the owner or his agents, except upon written
authority from HAWS, Sparks, Nevada. HAWS will not be liable for any damages
caused by defective materials or poor workmanship, except for replacements, as
provided above. Buyer agrees that Haws has made no other warranties either
expressed or implied in addition to those above stated, except that of title with
respect to any of the products or equipment sold hereunder and that HAWS shall
not be liable for general, special, or consequential damages claimed to arise under
the contract of sale. The drinking fountain manufactured by HAWS is warranted to
function if installation and maintenance instructions provided are adhered to. The
units also must be used for the purpose for which they were intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL, PLEASE CALL:
1-800-766-5612
FOR PARTS CALL:
1-800-758-9378
(U.S.A. AND CANADA ONLY) MONDAY-THURSDAY: 6:00 A.M. – 4:00 P.M. PST
FRIDAY: 6:00 A.M
–
1:00 P.M. PST

12/06 Model 3177FR/3177.6280FR/3177.6519FR Page 2 of 7
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable
wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket wrench or open end
wrench.
LOCATION OF UNIT: The Model 3177FR/3177.6280FR/3177.6519FR Drinking Fountain is a
wheelchair accessible drinking water facility. The height dimensions shown, meet current ADA
requirements. When installing this unit, local, state or federal codes should be adhered to. If
height other than shown is required, then dimensions must be adjusted accordingly.
SUPPLY LINE: The minimum recommended line size is 1/2“IPS. Flowing pressure is 30-90 psi
(2-6 ATM) for Models 3177FR and 3177.6280FR. Flowing pressure for Model 3177.6519FR is
45-90 psi (3-6 ATM). Where sediment or mineral content is a problem, an inlet filter is
recommended.
PLUMBING CONNECTIONS: Inlet at freeze valve is 1/2” IPS (male). Waste outlet is 1-1/2”
O.D. tailpiece.
MAINTENANCE: Periodically clean the strainer. Refer to 6518FR/6518.2FR/6519FR
Operation and Maintenance Sheet for additional information.
TROUBLESHOOTING 3177FR
PROBLEM REPAIR CHECKLIST
1. Insufficient bubbler flow. 1a. Check that inlet screwdriver stop valve is wide
open. (Customer supplied). Turn
counterclockwise.
b. Verify minimum 30 PSI flowing supply pressure.
c. Clean inlet strainer.
d. Adjust valve to increase flow. See 6518FR
Valve Manual.
TROUBLESHOOTING 3177.6280FR
PROBLEM REPAIR CHECKLIST
1. Insufficient bubbler flow. 1a. Check that inlet screwdriver stop valve is wide
open. (Customer supplied). Turn
counterclockwise.
b. Verify minimum 30 PSI flowing supply pressure.
c. Clean inlet strainer.
d. Adjust valve to increase flow. See 6518.2FR
Valve Manual.
TROUBLESHOOTING 3177.6519FR
PROBLEM REPAIR CHECKLIST
1. Insufficient bubbler flow. 1a. Check that inlet screwdriver stop valve is wide
open. (Customer supplied). Turn
counterclockwise.
b. Verify minimum 45 PSI flowing supply pressure.
c. Clean inlet strainer.
d. Adjust valve to increase flow. See 6519FR
Valve Manual.
© 2006 Haws®Corporation – All Rights Reserved
HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation.