Haws 3377FR Guide

03/20 Model 3377FR Page 1 of 4
1455 Kleppe Lane Sparks, NV 89431-6467 [phone] Fax [phone]
E-mail: [email protected]  website: www.hawsco.com
No. 0002077365 (11)
Model 3377FR
Drinking Fountain
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
LIMITED WARRANTY
HAWS warrants that this specific product is guaranteed against defective material or
poor workmanship for a period of one year from date of shipment. HAWS liability
under this warranty shall be discharged by furnishing without charge F.O.B. HAWS
Factory any goods, or part thereof, which shall appear to the Company upon
inspection to be of defective material or not of first class workmanship, provided that
claim is made in writing to Haws within a reasonable period after receipt of the
product. Where claims for defects are made, the defective part or parts shall be
delivered to the Company, prepaid, for inspection. HAWS will not be liable for the
cost of repairs, alterations or replacements, or for any expense connected therewith
made by the owner or his agents, except upon written authority from HAWS, Sparks,
Nevada. HAWS will not be liable for any damages caused by defective materials or
poor workmanship, except for replacements, as provided above. Buyer agrees that
HAWS shall not be liable for general, special, or consequential damages claimed to
arise under the contract of sale. The drinking fountain manufactured by HAWS is
warranted to function if installation and maintenance instructions provided are
adhered to. The units also must be used for the purpose for which they were
intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT: 1-800-766-5612
FOR CUSTOMER SERVICE: 1-888-640-4297

03/20 Model 3377FR Page 2 of 4
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable wrench, 10"
pipe wrench, 3/32” and 5/32” hex key wrench, 9/16”, 1/2", 7/16” socket wrench or open end wrench.
LOCATION OF UNIT: The Model 3377FR Drinking Fountain is a wheelchair accessible drinking water
facility. The height dimensions shown, meet current ADA requirements. When installing this unit, local,
state or federal codes should be adhered to. If height other than shown is required, then dimensions
must be adjusted accordingly.
SUPPLY LINE: The minimum recommended line size is 1/2“IPS. Flowing pressure is 30-90 psi (2-6
ATM) for Models 3377FR. If used with Model 6519FR, the flowing pressure is 45-90 psi (3-6 ATM).
Where sediment or mineral content is a problem, an inlet filter is recommended.
PLUMBING CONNECTIONS: Supply inlet is 1/2” IPS male. Waste outlet is 1-1/4” Slip Joint.
MAINTENANCE: Periodically clean the strainer. Refer to 6518FR Operation and Maintenance Sheet
for additional information.
TROUBLESHOOTING 3377FR
PROBLEM
REPAIR CHECKLIST
Insufficient bubbler flow.
1a.
Check that inlet screwdriver stop valve is wide
open (customer supplied). Turn
counterclockwise.
b.
Verify minimum 30 psi flowing supply pressure.
c.
Adjust valve to increase flow. See 6518FR Valve
Manual.
d.
Clean screens (inside nozzle body). Unscrew
nozzle insert and very gently activate water
supply to pop out qty. 3 screens (be careful not to
lose screens). Remove any debris clogging the
screen openings and place back into nozzle body.
Reassemble nozzle insert.
General Notes:
Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to ensure correct
engagement with O-Ring.
For more information about Haws products, see our website: www.hawsco.com
© 2020 Haws®Corporation –All Rights Reserved
HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

1STRAINER ASSY
2
4
3BOTTOM PLATE PUSH BUTTON ASSY
5
PARTS BREAKDOWN
VALVE FREEZE RESISTANT
BUBBLER HEAD
6DRIVER, NOZZLE .25 HEX
STYLE B
(TUBING CONNECTS TO
INSERT ASSY)
FOUNTAIN COULD HAVE EITHER STYLE
STYLE A
(TUBING CONNECTS
TO ELBOW)
ROTATED 90° INTO VIEW
DETAIL A
(OPTIONAL)
FOR REMOVAL
OF NOZZLE
WITH TUBE
6
(STYLE A OR STYLE B)
0002082253
6518FR
PBM1000
5881PBA
5705FR
6463
APPROVED
DRAWN
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BYECN NO.
PAGE
DATE
DATE
ECN:
REVISED PER
CHKD
Haws Corporation - All Rights Reserved
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
ITEM DESCRIPTION
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.
PART NO.
RTM
10/20/98
11
0002077365
3377FR
1:14
11
FV 04/02/20
DP
3 OF 4
PARTS BREAKDOWN
5527
2020
FV
5
34
2
1
VALVE BOX
A
5705LAMIN
(OBSOLETE -
SHOWN FOR
REFERENCE
ONLY)
(NOT SUPPLIED)
ENSURE TUBE IS DISCONNECTED FROM
"PUSH-IN" TYPE CONNECTOR ON PRESSURE
REGULATOR PRIOR TO REMOVAL. APPLY A
DROP OF LOCTITE 222MS ON NOZZLE
THREADS PRIOR TO REASSEMBLING BACK
ONTO BUBBLER HEAD. REATTACH TUBE TO
"PUSH-IN" TYPE CONNECTOR ENSURING IT IS
FULLY BOTTOMED OUT.
1NOTE:
11
**
** REQUIRED - SOLD SEPARATELY

457.5mm
BURY DEPTHS OF 48"[1219mm] AND 72"
[1829mm]. WASTE TO BE 1-1/4" IPS
MINIMUM TO A POROUS GRAVEL FILL OR
MAIN SEWER LINE LOCATED BELOW
FROST LINE (NOT SUPPLIED).
6" [152mm] SQUARE STEEL TUBE RUST PROOFED AND PAINTED.
GROUND LEVEL
1/8"
3/8"
9.5mm
3.2mm
6"
152mm
Ø127mm
5"
4X (SUPPLIED).
& WASHERS W/ 4" ANCHORS
1/2-13UNC HEX BOLTS
CONCRETE SLAB
(NOT SUPPLIED)
30" SQUARE
32-5/8"
828.7mm
685.8mm
INSTALLED, REINSTALL PUSH BUTTON.
THRU
C-BORE
127mm
DETAIL
MOUNTING PLATE
REMOVE PUSH BUTTON TO
1-1/4" O.D. IPS WASTE
(NOT SUPPLIED)
TUBING TO FOUNTAIN SUPPLY TUBING & AIR ACTUATION
(SUPPLIED)
1-1/4" O.D. WASTE BENDS
ACCESS PLATE
(SUPPLIED) & WASHERS 4X 3/8-16 HEX BOLTS
BOWL. AFTER WASTE ELBOW IS INSTALL WASTE ELBOW ONTO
3"
18"
76mm
27"
34"
864mm
WASTE
SUPPLY
&
304.8mm
12"
127mm
12"
304.8mm
5"
127mm
127mm
5"
5"
5"
Ø
4X 4X 30.2mm
19.1mm
Ø1-3/16"
3/4"
A
APPROVED:
DRAWN:
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
RTM
06/97
11
0002077365.D
3377FR
1:16
11
FV 04/02/20
DP
4 OF 4
INSTALLATION
5527
2020
FV
6518FR VALVE ASSY
VALVE BOX
(NOT SUPPLIED)
REQUIRED - SOLD SEPARARTELY