Haws 1117L Guide

03/20 Model 1117L Page 1 of 5
1455 Kleppe Lane Sparks, NV 89431-6467 [phone] Fax [phone]
E-mail: [email protected]  website: www.hawsco.com
No. 0002080223 (16)
Model 1117L
Drinking Fountain
INSTALLATION, OPERATION
&
MAINTENANCE INSTRUCTIONS
LIMITED WARRANTY
HAWS warrants that this specific product is guaranteed against defective material or
poor workmanship for a period of one year from date of shipment. HAWS liability
under this warranty shall be discharged by furnishing without charge F.O.B. HAWS
Factory any goods, or part thereof, which shall appear to the Company upon
inspection to be of defective material or not of first class workmanship, provided that
claim is made in writing to Haws within a reasonable period after receipt of the
product. Where claims for defects are made, the defective part or parts shall be
delivered to the Company, prepaid, for inspection. HAWS will not be liable for the
cost of repairs, alterations or replacements, or for any expense connected therewith
made by the owner or his agents, except upon written authority from HAWS, Sparks,
Nevada. HAWS will not be liable for any damages caused by defective materials or
poor workmanship, except for replacements, as provided above. Buyer agrees that
HAWS shall not be liable for general, special, or consequential damages claimed to
arise under the contract of sale. The drinking fountain manufactured by HAWS is
warranted to function if installation and maintenance instructions provided are
adhered to. The units also must be used for the purpose for which they were
intended.
NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,
PROVIDED OR GIVEN BY HAWS.
NOTE TO INSTALLER: Please leave this information with the Maintenance Department.
SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS
MODEL PLEASE CALL:
TECHNICAL SUPPORT: 1-800-766-5612
FOR CUSTOMER SERVICE: 1-888-640-4297

03/20 Model 1117L Page 2 of 5
RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable
wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket wrench or open end
wrench.
LOCATION OF UNIT: The Model 1117L Drinking Fountain is a wheelchair accessible drinking
water facility. The height dimensions that are shown meet current ADA requirements. When
installing this unit, local, state or federal codes should be adhered to.
If height other than shown is required, then dimensions must be adjusted accordingly.
SUPPLY LINE: The minimum recommended line size is 1/2“IPS with 30-90 psi (2-6 ATM)
flowing pressure. Where sediment or mineral content is a problem, an inlet filter is
recommended.
PLUMBING CONNECTIONS: Inlet is 3/8“O.D. push-in type fitting. Waste outlet is female
1-1/4” IPS.
MAINTENANCE: Periodically clean the strainer. Refer to 5874 Series Valve Manual for more
information.
INSTALLATION PROCEDURE
GENERAL NOTES:
1. For all plastic push-in type fitting connections, only connect NSF-61 copper or
plastic tubing. Stainless steel or glass tubing is not recommended. The
following assembly instructions must be followed to ensure a watertight
connection:
a. Cut tubing square and clean.
b. Mark from end of tube the length of insertion (See table below).
c. Push tube into the fitting until it bottoms out.
d. To remove, depress collet and pull tubing out.
Tube Sizes
O.D.
Tolerance
Insertion Depth
1/4”
±.005”
11/16”
3/8”
±.005”
3/4”
1/2”
±.005”
7/8”
TROUBLESHOOTING
PROBLEM
REPAIR CHECKLIST
1.
Insufficient bubbler flow.
1a.
Check that inlet screwdriver stop valve is wide
open. Turn counter-clockwise.
b.
Verify minimum 30 psi flowing supply pressure.
c.
Clean strainer. See 5874 Series Valve Manual
d.
Adjust valve to increase flow. Use front adjust
screw or see 5874 Series Valve Manual.
For more information about Haws products, see our website: www.hawsco.com
© 2020 Haws®Corporation –All Rights Reserved
HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

6
47
PARTS BREAKDOWN
1
A
REF
2
3
1
1
1
STRAINER, WASTE ASSY5
1
BUBBLER HEAD ASSY, PCP
2PUSH BUTTON ASSY
3
BUTTON, PUSH, FLANGED, PCP W/ VALVE
4
BOTTOM PLATE8
6
5703M
PBA6
5874PBF
PBM1107
6462
ITEM DESCRIPTION PART #
VALVE REPAIR KIT VRK5874
TRAP 0005982900
MOUNTING PLATE 6717
7
8
5
APPROVED
DRAWN
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BYECN NO.
PAGE
DATE
DATE
ECN:
REVISED PER
CHKD
Haws Corporation - All Rights Reserved
HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [e-mail]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.
C.FENNER
10/28/06
16
0002080223
1117L
1:1
11
FV 04/02/20
DP
3 OF 5
PARTS BREAKDOWN
5527
2020
FV
4
ROTATED 90° INTO VIEW
DETAIL A
REMOVE INSERT
WITH 5/16 HEX SOCKET
(NOT SUPPLIED)
2
NOTES:
1 5874PBF (ITEM 2) INCLUDES VRK5874 CARTRIDGE ASSEMBLY
(ITEM 3) AND PBA6 FLANGED PUSH BUTTON (ITEM 4).
2 ENSURE TUBE IS DISCONNECTED FROM PUSH BUTTON VALVE
BODY PRIOR TO REMOVAL. APPLY ONE DROP OF LOCTITE
222MS TO NOZZLE THREADS PRIOR TO FASTENING BACK ONTO
BUBBLER HEAD. RE-ATTACH TUBE TO VALVE.
**
** REQUIRED - S0LD SEPARATELY

NOTES:
STANDING ADULT HEIGHT: SEE SHT 2 FIG 3
FOUNTAIN: 27" (686mm)
SUPPLY: 29-1/8" (740mm)
WASTE: 29-1/4" (743mm)
ADULT WHEELCHAIR HEIGHT: SEE SHT 2 FIG 2
FOUNTAIN: 24" (610mm)
SUPPLY: 26-1/8" (664mm)
WASTE: 26-1/4" (667mm)
CHILD WHEELCHAIR HEIGHT: SEE SHT 2 FIG 1
ROUGH IN DIMENSIONS FOR FOUNTAIN HEIGHTS:
4
3
(NOT SUPPLIED)
CHILD/ADULT
MOUNTING HOLE
ADULT STANDING
MOUNTING HOLE
SUPPLY
Ø7
16
[Ø11mm]
SUPPLY
WASTE
3
[76mm]
WASTE
21
2
[64]
41
4
[108mm]
(NOT SUPPLIED)
2X 2-7/8"
[73mm] 12
[305mm]
SMALL BACK PANEL LARGE BACK PANEL
8
[203mm]
16
[406mm]
32
[813mm]
ADULT STANDING
BUBBLER
CHILD/ADULT
FOUNTAIN 207
16
[519mm]
FLOOR LINE
187
8
[479mm]
1
2
[13mm]
MOUNTING PLATE
ADULT STANDING
WASTE
ADULT STANDING
SUPPLY
CHILD/ADULT
WASTE
CHILD/ADULT
SUPPLY
81
2
[216mm]
1-1/4" IPS TRAP
(SUPPLIED)
WALL FACE
3
12
[305mm]
20
[508mm]
MOUNTING HOLE: 24-13/16" (630mm)
MOUNTING HOLE: 27-13/16" (706mm)
36
[914mm]
16
[406mm] 16 [406mm]
143
4
[375mm]
13
[330mm]
8
[203mm] 8 [203mm] *2311
16
[602mm]
TO FLOOR
3
[76mm] 3
[76mm]
5.
NOTES CONTINUED ON SHEET 2 OF 2
1-1/4" IPS WASTE
(NOT SUPPLIED)
41
4
[108mm]
1-1/4" IPS WASTE
(NOT SUPPLIED)
CHILD/ADULT
BUBBLER
ADULT STANDING
FOUNTAIN
BUBBLER: 29-7/8" (756mm)
BUBBLER: 32-7/8" (832mm)
WASTE: 34-3/4" (883mm)
SUPPLY: 34-5/8" (879mm)
MOUNTING HOLE: 33-5/16" (846mm)
BUBBLER: 38-3/8" (972mm)
FOUNTAIN: 32-1/5" (826mm)
MUST BE INSTALLED BEFORE FINISH WORK
6717 MOUNTING PLATE
MOUNTING DETAIL
P/N 6717
MOUNTING
HOLES
SUPPLY STOP AND
3/8" OD SUPPLY
1/2" IPS SUPPLY
*
4
*
4
*
*4
4
4
4
4
*
*
*
*
4
4
4
*
*
HOLD ROUGH-IN DIMENSIONS ±18" (3.2MM).
WHEN INSTALLING THIS UNIT, LOCAL, STATE, OR FEDERAL CODES
SHOULD BE ADHERED TO. FOR INSTALLATION HEIGHTS OTHER
THAN SHOWN, DIMENSIONS MARKED (*) MUST BE ADJUSTED
ACCORDINGLY.
REFER TO 5874 SERIES OPERATION AND MAINTENANCE
MANUAL FOR PUSH BUTTON AND VALVE
INSTALLATION/MAINTENANCE INSTRUCTIONS.
REFER TO MODEL 1117L INSTALLATION DRAWING SHEET 2 OF 2 (ON HAWS
WEBSITE WWW.HAWSCO.COM) FOR PERMISSABLE BOWL MOUNTING PATTERNS.
TWO WHEELCHAIR HEIGHT FOUNTAINS CANNOT BE MOUNTED SIDE BY SIDE
PER ANSI A117.1.
1.
2.
BACK VIEW
APPROVED:
DRAWN:
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
C.FENNER
10/06
16
0002080223.D
1117L
1:2
12
FV 04/02/20
DP
4 OF 5
INSTALLATION
5527
2020
FV
THIS PLATE IS REQUIRED - SOLD SEPARATELY.
REQUIRED
SOLD SEPARATELY

NOTES:
6 FIGURES 1 AND 2 ARE REVERSIBLE. CAN BE RIGHT OR LEFT SIDE HIGH.
7 USE SHADED HOLES TO MOUNT AT INDICATED POSITIONS BASED ON COMBINATION
SELECTED (FIGS. 1 THRU 3).
8. REFER TO SHEET 1 OF 2 NOTE 4 FOR INSTALLED FOUNTAIN DIMENSIONS.
66
7 (TYPICAL)
FIGURE 1.
ADULT STANDING/CHILD WHEELCHAIR FIGURE 2. ADULT STANDING/ADULT WHEELCHAIR FIGURE 3.
ADULT STANDING/ADULT STANDING
BOWL MOUNTING PATTERNS
APPROVED:
DRAWN:
PART NUMBER
SCALE: SHEET OF
REVISION
DRAWING TYPE: SIZE: A
BY:ECN NO.
PAGE
DATE:
DATE:
ECN:
REVISED PER
CHK'D.:
Haws Corporation - All Rights Reserved. HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.
CR
MODEL(S)
1455 KLEPPE LANE
SPARKS, NEVADA 89431
[phone] FAX [phone]
E-MAIL: [email protected]
WEBSITE: WWW.HAWSCO.COM
THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS
MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.
C.FENNER
12/29/06
16
0002080223.D
1117L
1:2
22
FV 04/02/20
DP
5 OF 5
INSTALLATION
5527
2020
FV