HIK VISION DS-PK-LRT Instruction Manual

Hybrid and Network Security Control Panel
Operation Command

Security Control Panel Operation Command
i
Contents
Chapter 1 General Operation Command .................................................................................. 1
Chapter 2 Hybrid Security Control Panel Operation Command .................................................. 3

Security Control Panel Operation Command
1
Chapter 1 General Operation Command
Table 1-1 General Operation Commands
Name Function Key Notes
Arming/disarming
Away
arming/disarming [password] [#]
Only area keypad or
global keypad under
area setting page is
operated effectively.
Stay arming [Password] [*] [4] [#]
Only area keypad or
global keypad under
area setting page is
operated effectively.
All area away arming [Password] [Project]
[#]
Only global keypad
under global setting
page is operated
effectively.
All area stay arming [Password] [*] [4]
[Project] [#]
Only global keypad
under global setting
page is operated
effectively.
Bypass Bypass zone (n)
[Password] [Bypass]
[n] [n] [n] [#] [Bypass]
[n] [n] [n][#]
Single bypass zone
operation
Continuous bypass
operation
nnm is the zone
number, which is 3
digits and cannot be
omitted
Alarm clearing Clearing alarm [Password] [*] [1] [#]
Area
Entering area settings
page [*] [3] [Area No.] [#]
Only global keypad
under global setting
page is operated
effectively.
Exiting area settings
page [*][#]
Global keypad under
area setting page is
operated effectively.

Security Control Panel Operation Command
2
Name Function Key Notes
Keypad
Enabling/Disabling
keypad tone [*][5][1][#]
Tone on and off,
without interacting
with the control panel
LCD screen backlight
control [*] [5] [2] [n] [n] [n][#]
[n] [n][n] refers to a
few seconds after
pressing the key, 999
is solid light
Keypad tamper
detection function
switch
[*][5][4][#]
Turn on or off keypad
detection function
without interacting
with the control panel
LCD screen backlight
off [*][8][#] Turn off LCD backlight
English display [*] [9] [1] [1][#] LCD keypad displays
English
Chinese display [*] [9] [1] [0][#] LCD keypad displays
Chinese
Testing
Walking testing [Password][*] [6]
[0][#]
Exiting walking testing [Password][*] [6]
[2][#]
Panic alarm Panic [Panic] Press at least 3 s
Fire alarm Fire alarm [Fire] Press at least 3 s
One-touch away
arming
One-touch away
arming
[One-touch away
arming] Quick press
Equipment status
query System fault status [status] Used for system fault query

Security Control Panel Operation Command
3
Chapter 2 Hybrid Security Control Panel Operation
Command
Table 2-1 Operation Commands of Hybrid Control Panel
Function Operation Key Note
Arming/disarming
Away
arming/disarming [password] [#]
Only area keypad or
global keypad under
area setting page is
operated effectively.
Stay arming [Password] [*] [4] [#]
Only area keypad or
global keypad under
area setting page is
operated effectively.
Selected area away
arming
[Password] [Project]
[Area No.] [#]
Only global keypad
under global setting
page is operated
effectively.
Selected area stay
arming
[Password]
[*][4][Project] [Area
No.] [#]
Only global keypad
under global setting
page is operated
effectively.
All area away arming [Password] [Project]
[#]
Only global keypad
under global setting
page is operated
effectively.
All partition stay
arming
[Password] [*] [4]
[Project] [#]
Only global keypad
under global setting
page is operated
effectively.
All area disarming [Password] [*]
[Project] [#]
Only global keypad
under global setting
page is operated
effectively.
Bypass Bypass zone (n)
[Password] [Bypass]
[n] [n] [n] [#] [Bypass]
[n] [n] [n][#]
Single bypass zone
operation
Continuous bypass

Security Control Panel Operation Command
4
Function Operation Key Note
operation
nnm is the zone
number, which is 3
digits and cannot be
omitted
Alarm clearing
Clearing alarm [Password] [*] [1] [#]
All area clearing alarm [Password] [*]
[1][Project] [#]
Selected area clearing
alarm
[Password] [*]
[1][Area No.] [#]
Area
Entering area settings
page [*] [3] [Area No.] [#]
Only global keypad
under global setting
page is operated
effectively.
Area No. can be 1 or 2
digits.
Exiting area settings
page [*][#]
Global keypad under
area setting page is
operated effectively.
Keypad
Enabling/Disabling
keypad tone [*][5][1][#]
Tone on and off,
without interacting
with the control panel
LCD screen backlight
control [*] [5] [2] [n] [n] [n][#]
[n] [n][n] refers to a
few seconds after
pressing the key, 999
is solid light
Keypad tamper
detection function
switch
[*][5][4][#]
Turn on or off keypad
detection function
without interacting
with the control panel
LCD screen backlight
off [*][8][#] Turn off LCD backlight
English display [*] [9] [1] [1][#] LCD keypad displays
English
Chinese display [*] [9] [1] [0][#] LCD keypad displays
Chinese

Security Control Panel Operation Command
5
Function Operation Key Note
Testing
Walking testing [Password][*] [6]
[0][#]
Exiting walking testing [Password][*] [6]
[2][#]
Signal strength testing [Password][*] [6]
[3][#]
Exiting signal strength
testing
[Password][*] [6]
[4][#]
Panic alarm Panic [Panic] Press at least 3 s
Fire alarm Fire alarm [Fire] Press at least 3 s
Relay
Selected relay open [Password][*][8][5][n]
[n][n][#]
Selected relay close [Password][*][8][6][n]
[n][n][#]
Equipment status
query System fault status [status] Used for system fault query
Wireless device
enrollment/removal
Wireless device
enrollment/removal
[Password][Project][O
peration][Device
Type][RS-485
Address][#]
Note: No
corresponding digits
can be omitted in all
fields.
Operation mode: 1
represents
enrollment, and 2
represents removal
(not supported).
1 bit.
Device type: 01
represents the
remote controller (not
supported); 02
represents the
detector or single
zone module; 03
represents the
repeater; 04
represents the output
module; and 05

Security Control Panel Operation Command
6
Function Operation Key Note
represents the
sounder.
2 bits.
RS-485 address: 00 to
31.
2 bits.
RS-485 wired device Delete the selected
RS-485 wired device
[password] + [*] +
[Engineering] + [485
address] + [#]
Delete the selected
RS-485 wired device
corresponding to
RS-485 address.
Display contact
information
Turn on/off company
and phone display [*][5][3][#]
Note
The area number is two digits. For example, you must input 01 in area 1 that 0 cannot be omitted.
The RS-485 address is two digits. For example, you must input 03 if the address is 3 that 0 cannot
be omitted.
Password: It means that passwords of all user categories can be entered, and whether there are
corresponding privileges according to the actual configuration items.

UDB