HIK VISION AX HYBRID PRO User manual

AX HYBRID PRO
User Manual

AX HYBRID PRO User Manual
i
Legal Information
© 2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version of this Manual at the Hikvision website
(https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properties of
Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND
“WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR
A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT
LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS,
AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR

AX HYBRID PRO User Manual
ii
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognition features, biometrics data is stored in your device with encryption
method; for fingerprint device, only fingerprint template will be saved, which is impossible to
reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protection laws and regulations, including without limitation, conducting
security controls to safeguard personal data, such as, implementing reasonable administrative and
physical security controls, conduct periodic reviews and assessments of the effectiveness of your
security controls.

AX HYBRID PRO User Manual
iii
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Danger
Indicates a hazardous situation which, if not avoided, will or could
result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.
Note
Provides additional information to emphasize or supplement
important points of the main text.
Note
Please update firmware to the latest version.
For installers, it is recommended to install and maintain devices via Hik-ProConnect.

AX HYBRID PRO User Manual
iv
Regulatory Information
EN 50131-3:2009
EN 50131-10:2014
EN 50136-2:2013
EN 50136-1:2012+A1:2018
EN 50131-6:2017
EN 50131-1:2006+A1:2009+A2:2017+A3:2020
EN 50130-4:2011+A1:2014
EN 50130-5:2011
Security Grade (SG): 2
Environmental Class (EC) : II
SP4
Note EN50131 compliance labeling should be removed if non-compliant configurations are
used.
EU Conformity Statement
This product and - if applicable - the supplied accessories too
are marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the EMC Directive
2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive
2011/65/EU
2012/19/EU (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product
to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentation for specific
battery information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead
(Pb), or mercury (Hg). For proper recycling, return the battery
to your supplier or to a designated collection point. For more
information see:www.recyclethis.info

AX HYBRID PRO User Manual
v
Contents
Chapter 1 Introduction ...............................................................................................................7
System Description......................................................................................................................7
Chapter 2 Start Up......................................................................................................................9
Activate the Device with WEB ....................................................................................................9
Chapter 3 Configuration ...........................................................................................................10
3.1 Set-up with the Web Client.................................................................................................10
3.1.1 Communication Settings..........................................................................................11
3.1.2 Device Management ................................................................................................25
3.1.3 Area Settings ............................................................................................................34
3.1.4 Video Management..................................................................................................34
3.1.5 Permission Management .........................................................................................36
3.1.6 Maintenance.............................................................................................................38
3.1.7 System Settings ........................................................................................................42
3.1.8 Check Status .............................................................................................................51
3.2 Report to ARC (Alarm Receiver Center) .............................................................................51
Setup ATS in Transceiver of Receiving Center..................................................................52
Setup ATS in Transceiver of the Panel..............................................................................52
Signaling Test.....................................................................................................................54
Chapter 4 General Operations ..................................................................................................55
4.1 Access Entries ......................................................................................................................55
4.2 Arming .................................................................................................................................55
4.3 Disarming.............................................................................................................................57
4.4 SMS Control .........................................................................................................................57
A. Trouble Shooting..................................................................................................................58
A.1 Communication Fault..........................................................................................................58
A.1.1 IP Conflict .................................................................................................................58
A.1.2 Web Page is Not Accessible.....................................................................................58
A.1.3 Hik-Connect is Offline ..............................................................................................58
A.1.4 Network Camera Drops off Frequently...................................................................58

AX HYBRID PRO User Manual
vi
A.1.5 Failed to Add Device on APP ...................................................................................58
A.1.6 Alarm Information is Not Reported to APP/4200/Alarm Center...........................59
A.2 Mutual Exclusion of Functions ...........................................................................................59
A.2.1 Unable to Enter Enrollment Mode..........................................................................59
A.3 Zone Fault............................................................................................................................59
A.3.1 Zone is Offline ..........................................................................................................59
A.3.2 Zone Tamper-proof..................................................................................................59
A.3.3 Zone Triggered/Fault ...............................................................................................59
A.4 Problems While Arming......................................................................................................60
A.4.1 Failure in Arming (When the Arming Process is Not Started)................................60
A.5 Operational Failure .............................................................................................................60
A.5.1 Failed to Enter the Test Mode.................................................................................60
A.5.2 The Alarm Clearing Operation on the Panel Does Not Produce the Alarm Clearing
Report ........................................................................................................................60
A.6 Mail Delivery Failure...........................................................................................................60
A.6.1 Failed to Send Test Mail ..........................................................................................60
A.6.2 Failed to Send Mail during Use................................................................................61
A.6.3 Failed to Send Mails to Gmail..................................................................................61
A.6.4 Failed to Send Mails to QQ or Foxmail ...................................................................61
A.6.5 Failed to Send Mails to Yahoo.................................................................................61
A.6.6 Mail Configuration ...................................................................................................62
B. Input Types ..........................................................................................................................63
C. Output Types .......................................................................................................................66
D. Event Types ......................................................................................................................... 67
E. Access Levels ........................................................................................................................68
F. Signalling..............................................................................................................................70
Detection of ATP/ATS Faults.....................................................................................................70
ATS Category.............................................................................................................................. 70
G. SIA and CID Code .................................................................................................................71
H. Communication Matrix and Operation Command.................................................................79

7
Chapter 1 Introduction
System Description
AX HYBRID PRO control panel is a wired intrusion control panel with wireless detectors &
peripherals access capability. It is the first control panel that supports high-speed Speed-X Bus,
which is a creative technology and is used to transmit verification video/picture from PIR-CAM.
Besides, this hybrid control panel supports customized voice library, which is designed for users to
upload customized voice files. These voice files will be played via alarm phone call when alarm
triggered. As for basic functions, it supports Wi-Fi, PSTN, TCP/IP and GPRS/3G/4G communication
methods. It also supports Hik-ProConnect, Hik-Connect, Hik IP Receiver, Hik IP Receiver Pro and
Hik-Central, which is applicable to the scenarios of market, hotel, supermarket, warehouse, office,
house (especially with cables pre-installed), etc.

8
Note
ISUP5.0: a privacy internet protocol that is used for accessing the third-party platform, which
supports alarm report uploading, AX HYBRID PRO management, and short video uploading.
The prioritization of the message and indications are the same. The AXPRO uploads messages and
gives indications synchronously.
Note
Standard DC-09 Protocol:
ADM-CID: The data presenting method of DC-09 is CID, which is not encrypted and only for
uploading alarm report.
*ADC-CID: The data presenting method of DC-09 is CID, which is encrypted and only for
uploading alarm report.
SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is not
encrypted and only for uploading alarm report.
*SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is
encrypted and only for uploading alarm report.

9
Chapter 2 Start Up
Activate the Device with WEB
Use web browser to activate the device. Use SADP software or PC client to search the online
device to get the IP address of the device, and activate the device on the web page.
Before You Start
Make sure your device and your PC connect to the same LAN.
Steps
1. Open a web browser and enter the IP address of the device.
Note
If you connect the device with the PC directly, you need to change the IP address of your PC
to the same subnet as the device. The default IP address of the device is 192.0.0.64.
2. Create and confirm the admin password. (The default user name of admin account is admin.)
Caution
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password
of your own choosing (using a minimum of 8 characters, including upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your
product. And we recommend you reset your password regularly, especially in the high
security system, resetting the password monthly or weekly can better protect your product.
3. Click OK to complete activation.
Note
• The default user name of admin account is admin.
•You should login the admin account first to enable the installer and the maintenance.
• The default password of the installer is installer12345, and the default password of the
maintenance is hik12345. These password will have to be changed when first connected.

10
Chapter 3 Configuration
3.1 Set-up with the Web Client
Steps
1. Connect the device to the Ethernet.
2. Search the device IP address via the client software and the SADP software.
3. Enter the searched IP address in the address bar.
4. Enter the user name and password to login.
Note
Only the admin and the installer can login to the web client.
You can view the user, device, and area status on the overview page.

11
3.1.1 Communication Settings
Wired Network
You can set the device IP address and other network parameters.
Steps
Note
Functions varied depending on the model of the device.
1. Click Communication→ Wired Network to enter the page.
2. Set the parameters.
–Automatic Settings: Enable DHCP and set the HTTP port.
–Manual Settings: Disabled DHCP and set IP Address, Subnet Mask, Gateway Address, DNS
Server Address.
3. Optional: Set correct DNS server address if the device needs to visit Hik-Connect server via a
domain name.
4. Click Save.
Wi-Fi
You can set the Wi-Fi parameters if there are secure and credible Wi-Fi networks nearby.
Steps
1. Click Communication → Wi-Fi to enter the Wi-Fi page.

12
2. Connect to a Wi-Fi.
–Manually Connect: Enter the SSID Wi-Fi and Wi-Fi Password, select Encryption Mode and click
Save.
–Select from Network List: Select a target Wi-Fi from the Network list. Click Connect and enter
Wi-Fi password and click Connect.
3. Click WLAN to enter the WLAN page.
4. Set IP Address, Subnet Mask, Gateway Address, and DNS Server Address.

13
Note
If enable DHCP, the device will gain the Wi-Fi parameters automatically.
5. Click Save.
Cellular Network
Set the cellular network parameters if you insert a SIM card inside the device. By using the cellular
network, the device can upload alarm notifications to the alarm center.
Before You Start
Insert a SIM card into the device SIM card slot.
Steps
1. Click Communication → Cellular Data Network to enter the Cellular Data Network Settings
page.
Note
Only the private network SIM card user needs to enter the access number.
2. Enable the function.
3. Set the cellular data network parameters.
Access Number
Input the operator dialing number.

14
Note
Only the private network SIM card user needs to enter the access number.
User Name
Ask the network carrier and input the user name.
Access Password
Ask the network carrier and input the password.
APN
Ask the network carrier to get the APN information and enter the APN information.
Data Usage Limit
You can enable the function and set the data threshold every month. If data usage is more
than the configured threshold, an alarm will be triggered and uploaded to the alarm center
and mobile client.
Data Used This Month
The used data will be accumulated and displayed in this text box.
4. Click Save.
Alarm Center
You can set the alarm center’s parameters and all alarms will be sent to the configured alarm
center.
Steps
1. Click Communication → Alarm Receiving Center to enter the Alarm Receiving Center page.

15
2. Select the ARC1 or ARC3 for configuration, and slide the slider to enable the selected alarm
receiver center.
Note
Only if the alarm receiver center 1/3 is enabled, you can set the alarm receiver center 2/4 as the
backup channel and edit the channel parameters.
3. Select the Protocol Type as ADM-CID, ISUP, SIA-DCS, *SIA-DCS, *ADM-CID, or CSV-IP to set
uploading mode.

16
Note
Standard DC-09 Protocol
ADM-CID: The data presenting method of DC-09 is CID, which is not encrypted and only for
uploading alarm report.
*ADM-CID: The data presenting method of DC-09 is CID, which is encrypted and only for
uploading alarm report.
SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is not
encrypted and only for uploading alarm report.
*SIA-DCS: The data presenting method of DC-09 is DCS (also called SIA protocol), which is
encrypted and only for uploading alarm report.
ADM-CID or SIA-DCS: You should select the Address Type as IP or Domain name, and enter the
Server address, port number, account code, impulse counting time, attempts, polling rate, etc.
Note
Set the polling rate with the range from 10 to 3888000 seconds.
ISUP, CSV-IP:You do not need to set the protocol parameters.
*SIA-DCS or *ADM-CID You should select the Address Type as IP or Domain name, and enter
the IP address, port number, account code, impulse counting time, attempts, polling rate,
encryption arithmetic, password length, etc.
Note
Set the polling rate with the range from 10 to 3888000 seconds.
1. Click Save.
Use PIRCAM to Upload Pictures or Videos
You can enable the PIRCAM function to upload pictures or videos.
1. Upload Pictures
You can choose to upload 1 to 20 pictures.
(1) Click Communication → Alarm Receiving Center to enter the page.
(2) Slide the slider to enable the selected alarm receiver center.
(3) Select the Protocol Type as SIA-DCS.
(4) Select the Companies as French Alarm Receiving Company.
(5) Click Save.

17
(6) Configure SMTP or FTP parameters.
Configure SMTP parameters:
Click Communication → Notification by Email.
Enable Video Verification Events and set corresponding parameters. For details, see
Notification by Email. Click Save.
Configure FTP parameters:
Click Communication → FTP to enter the FTP Settings page.
Slide the slider to enable FTP and set corresponding parameters. For details, see
FTP
.
Click Save.

18
2. Upload Videos
In this condition, when the PIRCAM is set to catch more than two pictures, videos will be
uploaded.
(1) Click Communication → Alarm Receiving Center to enter the Alarm Receiving Center
page.
(2) Slide the slider to enable the selected alarm receiver center.
(3) Select the Protocol Type as SIA-DCS.
(4) Click Save.
(5) Configure SMTP or FTP parameters as same as Upload Photos.
Notification Push
When an alarm is triggered, if you want to send the alarm notification to the client, alarm center,
cloud or mobile phone, you can set the notification push parameters.
Steps
1. Click Communication → Event Types Notification.

19
2. Enable the target notification.
Zone Alarm/Lid Opened
The device will push notifications when the zone alarm (on web client, software client or mobile
client) is triggered or the zone peripherals alarm is triggered or restored.
Peripherals Lid Opened
The device will push notifications when lid opened alarm of any peripheral is triggered or
restored.
Panel Lid Opened
The device will push notifications when lid opened alarm of the control panel is triggered or
restored.
Panic Alarm
The device will push notifications when panic alarm on keypads or keyfobs is triggered or
restored.
Medical Alarm
The device will push notifications when medical alarm on keypads is triggered.
Fire Alarm
The device will push notifications when fire alarm on keypads is triggered or a user presses the
fire alarm key on the keypad.