HIK VISION DS-2CC5102P User manual

Day Night Dome Camera·User Manual
0
0
Day Night Dome Camera
User Manual
UD.6L0201D0117A01

Day Night Dome Camera·User Manual
1
1
Thank you for purchasing our product. If there are any questions,
or requests, please do not hesitate to contact the dealer.
This manual applies to following cameras:
Models
Models
DS-2CC5102P(N)
DS-2CC5112P(N)
DS-2CC5172P(N)
DS-2CC5182P(N)
DS-2CC5192P(N)
DS-2CC51A2P(N)
This manual may contain several technical incorrect places or
printing errors, and the content is subject to change without notice.
The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures
described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the
performance or reliability of the security or signaling aspects of
this product. UL has only tested for fire, shock or casualty hazards
as outlined in UL’s Standard(s) for Safety, UL60950-1. UL
Certification does not cover the performance or reliability of the
security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS
WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY
OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS
PRODUCT.”
1000001021224

Day Night Dome Camera·User Manual
2
2
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to
comply with the limits for a digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized
European standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC.

Day Night Dome Camera·User Manual
3
3
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentation for specific battery
information. The battery is marked with this
symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery
to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.

Day Night Dome Camera·User Manual
4
4
Safety Instruction
These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the
warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the
cautions are neglected.
Warnings
Please adopt the power adapter which can meet the safety
extra low voltage (SELV) request. And source with DC 12V or
AC 24V (depending on models) according to the IEC60950-1
and Limited Power Source standard.
If the product does not work properly, please contact your
dealer or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not assume any
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.

Day Night Dome Camera·User Manual
5
5
responsibility for problems caused by unauthorized repair or
maintenance.)
To reduce the risk of fire or electrical shock, do not expose this
product to rain or moisture.
This installation should be made by a qualified service person
and should conform to all local codes.
Please install blackouts equipment into the power supply
circuit for convenient supply interruption.
Please make sure that the ceiling can support more than 50(N)
Newton gravities if the camera is fixed to the ceiling.
Cautions
Make sure the power supply voltage is correct before using the
camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is
necessary, use a clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period of
time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera at the sun or extra bright places. A
blooming or smear may occur otherwise (which is not a
malfunction however), and affecting the endurance of sensor
at the same time.

Day Night Dome Camera·User Manual
6
6
The sensor may be burned out by a laser beam, so when any
laser equipment is being used, make sure that the surface of
the sensor will not be exposed to the laser beam.
Do not place the camera in extremely hot or cold temperatures
(the operating temperature should be between -10°C ~ 60°C ,
dusty or damp locations, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a
proper operating environment.
Do not let water and any liquid flow into the camera.
While shipping, the camera should be packed in its original
packing, or packing of the same texture.
Improper use or replacement of the battery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.

Day Night Dome Camera·User Manual
7
7
Table of Contents
1 Introduction ........................................................................8
1.1 Features ..................................................................8
1.2 Overview .................................................................9
2 Installation........................................................................11
2.1 Ceiling Mounting .................................................... 11
2.2 Wiring .................................................................... 17
Appendix...............................................................................18
1 Glossary ................................................................... 18
2 Troubleshooting......................................................... 22
3 Technical Maintenance............................................... 25

Day Night Dome Camera·User Manual
8
8
1Introduction
1.1 Features
This camera adopts high performance sensor and advanced print
circuit board design techno logy. It possesses of high resolution,
low distortion, and low noise features, etc. It is extremely suitable
for surveillance system and image process system.
Supply high definition and clear image
Day Night Auto Switch
Low Illumination
Support auto white balance with high color rendition
Back Light Compensation
Support auto electronic shutter control to adapt to different
environments
Support auto gain control, adaptive brightness
High SNR ensures clear and pleased image
Advanced Engineering Design, High Reliability
Advanced 3-axis design allows this dome camera to be
adjusted horizontally and vertically to meet different mounting
requirements

Day Night Dome Camera·User Manual
9
9
1.2 Overview
The appearance of the cameras is as follows:
2
1
6
5
4
3
Figure 1-1 Overview
Table 1-1 Overview
Description
Description
1 Black Liner
2 Lower Dome

Day Night Dome Camera·User Manual
10
10
Description
Description
3 Camera
4 Tilt Lock Screws
5 Power Output
6 Video Output

Day Night Dome Camera·User Manual
11
11
2Installation
Before you start:
Please make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off during
the installation.
Check the specification of the products for the installation
environment.
Check whether the power supply is matched w ith your AC
outlet to avoid damage.
If the product does not function properly, please contact your
dealer or the nearest service center. Do not disassemble the
camera for repair or maintenance by yourself.
Please make sure the wall is strong enough to withstand three
times the weight of the camera.
Note: For the cement ceiling, you need to mount the camera with
expansion screws. For the woodiness ceiling, you can mount the
camera with self-tapping screws.
2.1 Ceiling Mounting
Steps:
1. Rotate the lower dome anticlockwise to remove it as shown in
Figure 2-1.

Day Night Dome Camera·User Manual
12
12
Figure 2-1 Remove the Lower Dome
2. Remove the black liner.
Figure 2-2 Remove the Black Liner
Anticlockwise

Day Night Dome Camera·User Manual
13
13
3. Attach the drill template (supplied) to the place where you
want to fix the camera.
4. Drill two screws holes according to the circles on the drill
template as shown in Figure 2-3.
Figure 2-3 The Drill Template

Day Night Dome Camera·User Manual
14
14
5. Attach the camera to the ceiling by aligning screw holes of the
camera with the screw ho les on the drill template.
6. Secure the camera with screws as shown in Figure 2-4.
7. Route the cables for the camera. Please refer to the section 2.2
Wiring for details.
Figure 2-4 Install the Camera
8. Three-axis adjustment.
1). View the camera image using the monitor.
2). Rotate the panning table to adjust the panning position of
the camera. The adjusting range is from 0 degree to 355
degrees.
3). Loosen the tilt lock screws.
4). Adjust the tilting position of the camera. The adjusting
range is from 0 degree to 90 degrees.
Wall

Day Night Dome Camera·User Manual
15
15
5). Tighten the tilt lock screws.
6). Rotate the lens to adjust the azimuth angle of the image.
水平可调355度
垂直可调90度
旋转可调355度
Figure 2-5 Three-axis Adjustment
9. Rotate the black liner clockwise back to the camera.
Figure 2-6 Install the Black Liner

Day Night Dome Camera·User Manual
16
16
10. Rotate the lower dome clockwise back to the camera.
Figure 2-7 Install the Lower Dome
Figure 2-8 Finish the Installation
Clockwise

Day Night Dome Camera·User Manual
17
17
2.2 Wiring
Please make sure that the power adapter matches with the
camera.
The standard power supply of the camera is 12V DC (Please
refer to technical specifications for more details).
Please plug the power adapter not too far away because the
transmission distance of DC power is limited.
Figure 2-9 Connections

Day Night Dome Camera·User Manual
18
18
Appendix
1 Glossary
Note:
The glossary gives brief explanations to the basic operation
principle or the basic function of the camera. However, it doesn’t
mean the listed functions are all supported by the cameras
mentioned in this manual. Please take the function in the
corresponding specification as the standard.
Definition:
Definition is the degree to distinguish the edge between two parts
clearly.
Contrast:
Contrast is the color difference between the brightest and darkest
parts.
Saturation:
Saturation is the degree of color purity. The color is purer, the, the
image is brighter.
DAY/NIGHT Auto Switch:
The cameras deliver color images during the day. And as light
diminishes at night, the cameras switch to night mode and deliver
black and white images with high quality.
AGC:

Day Night Dome Camera·User Manual
19
19
AGC is a control circuit that automatically changes the gain of a
receiver or other piece of equipment, so that the desired output
signal remains essentially. When under low illumination, AGC will
regulate the gain and amplification of the video signal.
S/N ratio:
It is the ratio of Signal voltage and no ise voltage. The ratio is larger,
the effect of noise is less, and the image is clearer.
White Balance:
White balance can remove the unrealistic color casts. White
balance is the white rendition function of the camera to adjust the
color temperature according to the environment automatically.
BLC:
If you focus on an object against strong backlight, the object will
be too dark to be seen clearly. The BLC (Backlight Compensation)
function can compensate light to the object in the front to make it
clear, but this causes the over-exposure of the background where
the light is strong.
SMART IR:
The SMART IR adopts the smart image processing technique to
automatically adjust the brightness curve by detecting multi-zone
brightness, and so as to prevent the over exposure of central point
existed in short IR distance conditions.
Motion Detection:
In the user-defined motion detection surveillance area, the moving
object can be detected and trigger alarm. The sensitive level can
be customized according to the environment.