HIK VISION DS-K1T606 series User manual

Face Recognition Terminal
User Manual

UM DS-K1T606 061719NA 2
Copyright 2018-2019 Hikvision USA Inc. and Hikvision Canada Inc.
Hikvision USA Inc., 18639 Railroad St., City of Industry, CA 91748, USA
Hikvision Canada, 4848 rue Levy, Saint Laurent, Quebec, Canada, H4R 2P1
Telephone: [phone] • Toll Free in USA: [phone]
E-Mail: sales.[email protected] • www.hikvision.com
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be
“Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed,
translated, or distributed, partially or wholly, by any means, without the prior written permission of
Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or
representations, express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all
other information hereinafter are for description and explanation only. The information contained in
the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find
the latest version in the company Website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Manual Illustrations and Features
Graphics (screen shots, product pictures, etc.) in this document are for illustrative purposes only. Your
actual product may differ in appearance. Your product might not support all features discussed in this
document.
Trademarks Acknowledgement
and other Hikvision trademarks and logos are the properties of Hikvision in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS,” WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN
RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET
SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED FOR ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER PREVAILS.

UM DS-K1T606 061719NA 3
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Compliance: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
•This device may not cause harmful interference.
•This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and, if applicable, the supplied accessories too are marked with “CE” and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment,or dispose of it at designated collection
points. For more information see: www.recyclethis.info
2006/66/EC (Battery Directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

UM DS-K1T606 061719NA 4
Hikvision North America Privacy Policy
Last Updated: December 2018
Hikvision USA Inc. and Hikvision Canada Inc. and its affiliates (collectively “HIKVISION”) provide the
following services for use in conjunction with various HIKVISION Internet-connected products
(“Products”): a HIKVISION user Website and user accounts that may be accessed at
us.hikvision.com,
ca.hikvision.com,
https://distributors-us.hikvision.com/,
https://distributors-us.hikvision.com/guestLogin.htm,
https://ezviz-rma.hikvision.com/,
https://order-na.hikvision.com,
and all associated sites connected with us.hikvision.com (the “Website”); and any services available
on the Website, Web Apps, and Mobile Apps (“Available Services”). The term “HIKVISION Services” means
the Website and Available Services.
This Privacy Policy explains how HIKVISION handles the collection, storage, and disclosure of
information, including personal information, regarding our HIKVISION Services. It also applies to any
information we collect from the operation and use of Products we sell while connected to the HIKVISION
Services (the “Products), and any other HIKVISION Service that links to this Privacy Policy.
We may modify this Privacy Policy at any time, provided certain provisions of this Privacy Policy prove to
be incomplete or outdated and further provided that these changes are reasonable for you, taking into
account your interests. If we make material changes to this Privacy Policy, we will notify you by the e-
mail address specified in your account or by means of notice on our Websites.
You can determine when this Privacy Policy was last revised by referring to the date it was “Last
Updated” above.
What Information We Collect
In order to provide HIKVISION services to you, we will ask you to provide personal information that is
necessary to provide those services to you. If you do not provide your personal information, we may not
be able to provide you with our products or services.
“Personal information” shall have the same meaning as “personal data” and shall include any
information relating to an identified or identifiable natural person (“data subject”); an identifiable
person is one who can be identified, directly or indirectly, in particular by reference to an identification
number or to one or more factors specific to his physical, physiological, mental, economic, cultural, or
social identity. Examples of personal information include your name, telephone number, e-mail
address, and physical address.
Personal information also includes information that alone cannot directly identify you, but with other
information we have access to can identify you such as product serial numbers, log data that
automatically records information about your visit such as your browser type, domains, page views,
the URL of the page that referred you, the URL of the page you next visit, your IP address, and page
navigation, unique device ID collected from Products and your mobile devices, data from cookies, pixel
tags, and Web beacons, video content files that do not contain personal visual identity information, the
country and time zone of the connected Product, geo-location, mobile phone carrier identification,

UM DS-K1T606 061719NA 5
and device software platform and firmware information.
How We Collect and Use Your Information
Here are some examples of the personal information we may collect and how we may use it:
•When you create your account to use HIKVISION Services (“Account”), we will collect information
including your name, phone number, and e-mail and physical address. In addition, when you install and
activate Products, we will collect certain basic information via our HIKVISION Services such as your
product name, the product’s verificationcode, and serial number, which are unique to the Product
connected to the HIKVISION Services and associated with your Account.
•When you respond to our e-mails, contact our customer service, or use other customer support tools,
we collect your information to provide you with support, verify your identity with your Account profile
information, and confirm your Product.
We may also use the information we collect for the following Purpose
•send you reminders, technical notices, updates, alerts, support and administrative messages, service
bulletins, and requested information; and
•pursuant to our legitimate business interests:
˗operate, maintain, improve, and develop our HIKVISION Services and Products;
˗personalize your experience with our HIKVISION Services and Products;
˗increase the safety of our HIKVISION Services and Products – for example, for user
authentication, security protection, fraud detection, filing, and backups;
˗perform analytics and conduct customer research;
˗communicate and provide to existing customers additional information that may be of interest
to you about our products and services;
˗manage our everyday business needs such as auditing, administration of our HIKVISION Services,
forum management, fulfillment, analytics, fraud prevention, and enforcement of our corporate
reporting obligations and Terms of Service;
˗enhance other information we have about you to help us better understand you and determine
your interests; and
˗in the context of a corporate transaction (e.g., corporate restructuring, sale or assignment of
assets, merger) and to protect our rights or property, to enforce our Terms of Service and legal
notices and for the establishment, exercise, and defense of legal claims;
with your express consent to
˗send you electronic communications in order to inform you about new products and services,
unless you choose to unsubscribe;
˗use certain non-essential cookies to better understand user behavior, in order to optimize user
experience, perfect function design, and offers for products and services from us or to provide
better services;
•meet a legal obligation, a court order or other binding decision(s); and accomplish a purpose unrelated

UM DS-K1T606 061719NA 6
to those described in this Privacy Policy by first notifying you and, where required, offering you a choice
as to whether or not we may use your Personal Information in this different manner.
Cookies and Other Technologies
We also use cookies, Web beacons, pixel tags, and other technologies to keep records, store your
preferences, improve our advertising, and collect information such as log data and device data. This
allows us to better understand how you use our HIKVISION Services and Products, diagnose and
troubleshoot any problems you have, and otherwise administer and improve our HIKVISION Services and
Products. For more information about cookies, please refer to our Use of Cookies (https://order-
na.hikvision.com/helpCenter/useOfCookies).
How We Share Your Information
HIKVISION may disclose personal information to cloud service provider, network service provider, and
other service providers on the basis of non-disclosure agreements.
The following are the limited situations where we may share personal information:
•We share your personal information with HIKVISION affiliates, who are required to use that information
in accordance with the purposes described in this Privacy Policy.
•We use service providers, vendors, technicians, and other third-parties to help us process, store, and
protect some of your data and otherwise help us administer our Products and HIKVISION Services
effectively, provide a better user experience, process yourpurchases, and increase the quality of our
Products and HIKVISION Services. These third-parties are forbidden from using your personal
information for non-HIKVISION purposes and are required to protect your information in accordance
with this Privacy Policy and applicable laws.
•We may provide information to third-parties if we believe in good faith that we are required by mandatory
law to do so. For example, to comply with legal orders and government requests; response to a
subpoena, or similar legal process, including to law enforcement agencies, regulators, and courts; to
protect the interests of our customers and users of the HIKVISION Service; to respond to claims that any
content posted or displayed using the HIKVISION Service violates the rights of third parties; in an
emergency protect the health and safety of users of the HIKVISION Service or the general public; or to
enforce compliance with our Terms of Service.
•If HIKVISION and/or all or part of our assets are ever sold or transferred, your personal information may
be among the items sold or transferred. Under such circumstance, we will notify you by the e-mail
address specified in your account or by means of notice on us.hikvision.com and associated Websites
of (i) the identity and contact information of the purchaser or transferee, (ii) your right to revoke your
consent to the provision of personal information, and (iii) the means by which you may revoke such
consent.
•We share information to protect our own legitimate business interests when we believe in good faith
that we are required or permitted by law to do so. For example, we may share your personal
information as needed to support auditing, compliance, and corporate governance functions; to
combat fraud or criminal activity; to protect our rights or those of our affiliates and users; or as part of
legal proceedings affecting HIKVISION.
We may also disclose non-personal information (for example, aggregated or anonymized data) publicly
or with third-parties, provided those data have been rendered anonymous in such a way that the data
subject is no longer identifiable. For example, we may share non-personal information:
•for the same reasons we might share Personal information;

UM DS-K1T606 061719NA 7
•to better understand how our customers interact with our HIKVISION Services and Products, in order to
optimize your experience, improve our products, or provide better services;
•for our own research and data analytics; or
•to our vendors for their own analysis and research.
Securing Your Personal Information
HIKVISION has implemented commercially reasonable administrative, technical, and physical security
controls that are designed to safeguard personal information. We also conduct periodic reviews and
assessments of the effectiveness of our security controls.
Notwithstanding the above, no method of transmission over the Internet, or method of electronic
storage, is 100% secure. Therefore, HIKVISION cannot guarantee that your personal information is under
absolute security with the existing security technology. If you have any questions about the security
of our HIKVISION Services, you can contact us at the contact information below in Contact Us.
Accessing, Correcting, and Retention of Your Personal Information
HIKVISION generally stores your personal information on HIKVISION’s servers, which is established upon
Amazon Servers, until you delete or edit it, or for as long as you remain a HIKVISION customer in order to
provide you with the most relevant offers.
Keeping your personal information current helps ensure that we provide you with the most relevant
offers. You can access, update, or delete your personal information via your Account profile. We are
ready to assist you in managing your subscriptions, deactivating your account, and removing your
active profile and data. Your personal information might not be immediately deleted, as we are required
to retain records relating to previous purchases through our HIKVISION Services for financial reporting
and compliance reasons pursuant to applicable laws. In addition, because of the way we maintain
certain services, after you delete certain information, we may temporarily retain backup copies of such
information before it is permanently deleted.
We will retain your personal information for the period necessary to fulfill the purpose outlined in this
Privacy Policy unless a longer retention period is required or permitted by applicable law.
If you are located in the European Union, subject to limitations in applicable law, you have certain rights
in respect to your personal information such as a right of access, rectification, restriction, opposition,
and portability. In order to exercise your rights please contact us at the contact information below in
Contact Us. You also have the right to withdraw your consent at all times, free of charge. You can do
this by opting out from direct marketing and by rejecting the use of cookies through your browser
settings. If you have concerns about how we handle your personal information, you have the right to
lodge a complaint with the data protection authority in your country of residence.
Social Community Features and Social Networks
Social Community Features
Our HIKVISION Services may allow you to publicly post or share information, communicate with others, or
otherwise make information accessible to others. Prior to doing so, please read our Terms of Service
carefully. All the information you post, share, or communicate may be accessible to anyone with
Internet access, and any personal information you include may be read, collected, and used by others.
Social Networks
You have the option to link social networks such as Facebook to your Account. You will be able to post
HIKVISION activity to your social network. By proceeding through any of the above steps, you grant
HIKVISION permission to access elements of your social network profile information that you have made

UM DS-K1T606 061719NA 8
available to be shared and to use it in accordance with the social network’s terms of use and this
Privacy Policy.
Links to Other Websites
We may permit others to link to the HIKVISION services or to post a link to their Website. We do not
endorse these Websites and are not responsible for other Websites or their privacy practices. Please
read their privacy policies before submitting information.
Your Choices
We think that you benefit from a more personalized experience when we know more about you and
your preferences. However, you can limit the information you provide to HIKVISION as well as the
communications you receive from HIKVISION through your Account preferences.
Commercial E-mails
You will receive commercial e-mails from us only if you have granted prior express consent or if
sending those e-mails is otherwise permitted, in accordance with applicable laws.
You may choose not to receive commercial e-mails from us by following the instructions contained in
any of the commercial e-mails we send or by logging into your Account and adjusting your e-mail
preferences. Please note that even if you unsubscribe from commercial e-mail messages, we may still
e-mail you non-commercial e-mails related to your Account on the HIKVISION Services.
Device Data
You may manage how your mobile device and mobile browser share certain device data with HIKVISION
by adjusting the privacy and security settings on your mobile device. Please refer to instructions
provided by your mobile service provider or the manufacturer of your device to learn how to adjust your
settings.
Children’s Privacy
HIKVISION does not intend that any portion of its HIKVISION Services will be accessed or used by children
under the age of 18, or equivalent minimum age in the relevant jurisdiction and such use is prohibited.
Our HIKVISION Services are designed and intended for adults. By using the HIKVISION Services, you
represent that you are at least 18 years old, or above the equivalent minimum age in the relevant
jurisdiction and understand that you must be at least 18 years old,or above the equivalent minimum
age in the relevant jurisdiction in order to create an account and purchase the goods or services
advertised through our HIKVISION Services. If we obtain actual knowledge that an account is
associated with a registered user who is under the age of 18 years old, or equivalent minimum age in
the relevant jurisdiction, we will promptly delete information associated with that account. If you are a
parent or guardian of a child under the age of 18, or equivalent minimum age in the relevant
jurisdiction and believe he or she has disclosed personal information to us please contact us at the
contact information below in Contact Us. A parent or guardian of a child under the age of 18, or
equivalent minimum age in the relevant jurisdiction may review and request deletion of such child’s
personal information as well as prohibit the use thereof.
Global Operations
We transfer and process your information globally both in our own facilities and with service providers,
or partners, regardless of where you use our Services. The laws, regulations, and standards of the
country in which your information is stored or processed may be different from those of your own
country.
California Privacy Rights: Pursuant to Section 1798.83 of the California Civil Code, residents of California
can obtain certain information about the types of personal information that companies with whom
they have an established business relationship have shared with third parties for direct marketing

UM DS-K1T606 061719NA 9
purposes during the proceeding calendar year. In particular, the law provides that companies must
inform consumers about the categories of personal information that have been shared with third
parties, the names and addresses of those third parties, and examples of the types of services or
products marketed by those third parties. To request a copy of the information disclosure provided by
HIKVISION pursuant to Section 1798.83 of the California Civil Code, please contact us at the contact
information below in Contact Us. Please allow 30 days for a response.
Contact Us
Please contact us if you have any questions or comments about our privacy practices or this Privacy
Policy. You can always reach us through the below contact information:
•A&E Program: [e-mail]
•Cybersecurity: [e-mail]
•Dealer Partner Program: [e-mail]
•Marketing: [e-mail]
•OEM/ODM: [e-mail]
•Sales: [e-mail]
•Technical Support: [e-mail]
•Canadian Technical Support: [e-mail]
•Need Help with This Product/Product Detail feature: [e-mail]
•A&E partner inquiries (user registration, new project support, etc.): [e-mail]
•HDP partner inquiries (user registration, new partner registration, etc.): [e-mail]
•US Hikcentral Trial Version Request: [e-mail]
•Canada Hikcentral Trial Version Request: [e-mail]
•Hikvision Robotics Division: [e-mail]
•Hikvision OEM/ODM Division: [e-mail]
•A&E partner registrations: [e-mail]
•RMA: [e-mail]
•Customer Service: [e-mail]
•Careers: [e-mail]
•Hikvision B2B Portal: [e-mail]
Please provide: (i) your name (or nickname), your country or region of residence and your preferred
method of contact; and (ii) the details of your request or comment along with any corresponding
Website links.
Mandatory Electrical Requirements

UM DS-K1T606 061719NA 10
Hikvision requires the following conditions and equipment for all of its electronic equipment:
•Grounding
Ensure good conductivity for all ground paths; examine ground path contact surfaces for defects,
dirt, corrosion, or non-conductive coatings that may impede conductivity. Repair or clean contact
surfaces as necessary to assure good metal-to-metal contact. Ensure fasteners are properly
installed and tightened.
•Electrical Wiring
Ensure your outlets are properly wired. They can be checked with an electrical outlet tester.
•Surge Suppressor (Required)
Hikvision is not responsible for any damage to equipment caused by power spikes in the electrical
power grid. Use of a surge suppressor meeting the following specifications is mandatory for all
Hikvision electronic equipment:
˗Specifications
>Listed by Underwriter’s Laboratories, meeting the UL 1449 Voltage Protection Rating (VPR)
>Minimum protection of 1,000 joules or higher
>Clamping voltage of 400 V or less
>Response time of 1 nanosecond or less
˗Usage
>Surge suppressors must not be daisy chained with power strips or other surge suppressors
˗Maintenance
>Replace after a serious electrical event (e.g., lighting blew out a transformer down the
street)
>Replace yearly in storm-prone areas
>Replace every two years as routine maintenance
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Provides additional information to emphasize or supplement important points of
the main text
Indicates a potentially hazardous situation, which if not avoided, could result in
equipment damage, data loss, performance degradation, or unexpected results
Indicates a hazard with a high level of risk, which if not avoided, will result in
death or serious injury

UM DS-K1T606 061719NA 11
Safety Instructions
•Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end user.
•In the use of the product, you must be in strict compliance with the electrical safety regulations of the
nation and region. Please refer to technical specifications for detailed information.
•Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
100-240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications
for detailed information.
•Do not connect several devices to one power adapter as adapter overload may cause overheating or a
fire hazard.
•Please make sure that the plug is firmly connected into the power socket.
•If smoke, odor, or noise rise from the device, turn off the power at once, unplug the power cable, and
then contact the service center.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•Ensure unit is installed in a well-ventilated, dust-free environment.
•Unit is designed for indoor use only.
•Keep all liquids away from the device.
•Ensure environmental conditions meet factory specifications.
•Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of
dropping it may cause damage to the sensitive electronics within the unit.
•Use the device in conjunction with a UPS if possible.
•Power down the unit before connecting and disconnecting accessories and peripherals.
•A factory recommended HDD should be used for this device.
•Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.

UM DS-K1T606 061719NA 12
Table of Contents
Chapter 1 Overview..............................................................................................................................14
1.1 Introduction .................................................................................................................................14
1.2 Main Features ..............................................................................................................................14
Chapter 2 Appearance............................................................................................................................15
Chapter 3 Terminal Descriptions ............................................................................................................16
Chapter 4 TerminalConnection................................................................................................................18
Chapter 5 Installation.............................................................................................................................19
5.1 Installation with Gang Box ..........................................................................................................19
5.2 Installing without Gang Box........................................................................................................20
Chapter 6 Basic Operation...................................................................................................................23
6.1 Activate Device............................................................................................................................23
Activating via Device...............................................................................................................23
Activating via SADP Software..................................................................................................24
Activating via Client Software.................................................................................................25
6.2 Login.............................................................................................................................................28
6.3 General Parameters Settings......................................................................................................30
Communication Settings.........................................................................................................30
System Settings ......................................................................................................................33
Setting Time.............................................................................................................................37
6.4 User Management........................................................................................................................37
Adding User ..............................................................................................................................38
Managing User .........................................................................................................................42
6.5 Setting Access Control Parameters............................................................................................43
6.6 Other Managements ....................................................................................................................44
Managing Data .........................................................................................................................44
Managing Log Query ................................................................................................................45
Importing/Exporting Data .......................................................................................................45
Testing .....................................................................................................................................47
Viewing System Information ...................................................................................................48
6.7 Authenticating Identity...............................................................................................................49
Authenticating via 1:1 Matching ............................................................................................49
Authenticating via Other Types ..............................................................................................50
Chapter 7 ClientOperation ......................................................................................................................51
7.1 User Registration and Login........................................................................................................51
7.2 System Configuration..................................................................................................................52
7.3 Access Control Management......................................................................................................52
Adding Access Control Device................................................................................................53
Viewing Device Status.............................................................................................................67
Editing Basic Information........................................................................................................68
Network Settings.....................................................................................................................69
Capture Settings......................................................................................................................71
RS-485 Settings.......................................................................................................................72
Wiegand Settings ....................................................................................................................73
Remote Configuration .............................................................................................................73
7.4 Organization Management..........................................................................................................82
Adding Organization ................................................................................................................82
Modifying and Deleting Organization......................................................................................82
7.5 Person Management ...................................................................................................................83
Adding Person..........................................................................................................................83
Managing Person .....................................................................................................................93
Issuing Card in Batch...............................................................................................................94

UM DS-K1T606 061719NA 13
7.6 Schedule and Template ...............................................................................................................96
Week Schedule ........................................................................................................................96
Holiday Group...........................................................................................................................97
Template ..................................................................................................................................99
7.7 Permission Configuration..........................................................................................................101
Adding Permission.................................................................................................................102
Applying Permission ..............................................................................................................103
7.8 Advanced Functions .................................................................................................................104
Access Control Parameters ..................................................................................................104
Card Reader Authentication .................................................................................................107
Multiple Authentication ........................................................................................................108
Open Door with First Card......................................................................................................111
Anti-Passing Back.................................................................................................................113
7.9 Searching Access Control Event...............................................................................................114
Searching Local Access Control Event.................................................................................115
Searching Remote Access Control Event ............................................................................115
7.10 Access Control Event Configuration ........................................................................................115
Access Control Event Linkage...............................................................................................116
Event Card Linkage................................................................................................................117
Cross-Device Linkage ...........................................................................................................119
7.11 Door Status Management..........................................................................................................120
Access Control Group Management .....................................................................................120
Anti-Control the Access Control Point (Door) ......................................................................122
Status Duration Configuration..............................................................................................123
Real-time Card Swiping Record ............................................................................................124
Real-time Access Control Alarm...........................................................................................125
7.12 Arming Control ...........................................................................................................................126
7.13 Time and Attendance.................................................................................................................126
Shift Schedule Management ................................................................................................127
Attendance Handling ............................................................................................................134
Advanced Settings ................................................................................................................138
Attendance Statistics...........................................................................................................143

UM DS-K1T606 061719NA 14
Chapter 1 Overview
1.1 Introduction
The DS-K1T606 series face recognition terminal is an access control device that is equipped with face
recognition functionality. It is mainly deployed as part of secure access control systems, such as
logistic centers, airports, university campuses, alarm centrals, dwellings and so on.
1.2 Main Features
•5-inch LCD touch screen that displays the operation interface
•2,000,000 pixel wide-angle lens
•Face recognition distance: 1 ft to 3.3 ft (0.3 m to 1 m)
•Live face detection: only a live face can be detected and authenticated
•Deep learning algorithm
•Maximum storage space of 3000 face pictures and 5000 fingerprints
Note: Only products with the fingerprint module support the fingerprint scanning function.
•Multiple authentication modes: face picture, fingerprint, card, or password, fingerprint and password,
fingerprint and card, face picture and fingerprint, etc.
Note: Only products with the fingerprint module support fingerprint scanning function.
•Face recognition duration ≤ 1s/user; face recognition accuracy rate >99%
•Device parameter management, search, and settings
•Imports card and user data to the device via TCP/IP communication or a USB flash drive
•Transmits data (authentication results and face pictures) to the client software via the TCP/IP
communication protocl
•Imports data (face pictures) to the device and exports data (added face pictures, captured face
pictures, and events) from the device via USB flash drive
•Stand-alone operation
•Connects to one external card reader via the RS-485 protocol
•Connects to the secure door control unit via the RS-485 protocol to avoid door opening when the
terminal is damaged
•Connects to the external access controller or Wiegand card reader via Wiegand protocol
•Voice prompt and prompt sound output
•Watchdog design for protecting the device and ensuring that the device is running properly
•EHome protocol and public network communication

UM DS-K1T606 061719NA 15
Chapter 2 Appearance
Refer to the following contents for detailed information on the face recognition terminal:
Figure 2-1: Face Recognition Terminal Diagram
Table 2-1 Description of Face Recognition Terminal
No.
Name
Description
1
USB Interface
Plug in the USB flash drive to import or export data
2
Loudspeaker
Sound emitter
3
Display Screen
5-inch LCD touch screen with a resolution of 800 × 480 pixels
4 Indicator
Solid Red: Standby
Flashing Red: Authentication failed
Solid Green: Authentication completed
Flashing Green: Authenticating (combined)
5
Fingerprint Module
+ Card Swiping
Area
Area where fingerprint can be inputted or card can be swiped
Note: Only devices with the fingerprint scanning function contain this
element.
Card Swiping Area
Area where card can be swiped
Note: Only devices without the fingerprint scanning function contain this
element.
3
Sensor
Detects illumination intensity. When the environment is too dark, the
device will automatically enable the supplementary light.
4
Display Screen
5" LCD touch screen with a resolution of 800 x 480
5
Wiring Terminals
Connect to other external devices, including the RS-485 card reader,
Wiegand card reader, door lock, alarm input, alarm output, etc.
6
Network Interface
Ethernet connection
7
Power Interface
Power supply connection
8
Micro SIM Card
Slot
Insert SIM card

UM DS-K1T606 061719NA 16
Chapter 3 Terminal Descriptions
The terminals contain power input, alarm input, alarm output, RS-485, Wiegand output, and door lock.
Refer to the following terminal diagram and connection description table for more information:
Figure 3-1: Terminal Inputs and Outputs

UM DS-K1T606 061719NA 17
Table 3-1: Terminal Connection Descriptions
Group
No.
Function
Color
Name
Description
Group A
A1
Power Input
Red
+12V
12V DC Power Supply
A2
Black
GND
Ground
Group B
B1
Alarm Input
Yellow/Blue
IN1
Alarm Input 1
B2
Yellow/Black
GND
Ground
B3
Yellow/Orange
IN2
Alarm Input 2
B4
Alarm Output
Yellow/Purple
NC
Alarm Output Wiring
B5
Yellow/Brown
COM
B6
Yellow/Red
NO
Group C
C1
RS-485
Yellow
485+
RS-485 Wiring
C2
Blue
485-
C3
Black
GND
Ground
C4
Wiegand
Green
W0
Wiegand Wiring 0
C5
White
W1
Wiegand Wiring 1
C6
Brown
WG_OK
Wiegand Authenticated
C7
Orange
WG_ERR
Wiegand
Authentication Failed
C8
Purple
BUZZER
Buzzer Wiring
C9
Gray
TAMPER
Tampering Alarm
Wiring
Group D
D1
Door Lock
White/Purple
NC
Lock Wiring (NC)
D2
White/Yellow
COM
Ground
D3
White/Red
NO
Lock Wiring (NO)
D4
Yellow/Green
SENSOR
Door Magnetic Sensor
Signal Input
D5
Yellow/Gray
BUTTON
Exit Door Wiring

UM DS-K1T606 061719NA 18
Chapter 4 TerminalConnection
You can connect the RS-485 terminal to the RS-485 card reader, the NC and COM terminals to the door
lock, the SENSOR/BUTTON terminal to the exit button, the alarm output and input terminal to the alarm
output/input devices, and the Wiegand terminal to the Wiegand card reader or the access controller.
If the WIEGAND terminal is connected to the access controller, the face recognition terminal can
transmit authentication information to the access controller, and the access controller can determine
whether to open the door or not.
The wiring diagram is as follows:
Figure 4-1: Face Recognition Wiring Diagram
Note: The Wiegand terminal displayed above is a Wiegand input terminal. You should set the face
recognition terminal’s Wiegand direction to “Input” to connect to a Wiegand card reader. To connect
an access controller, set the Wiegand direction to “Output” to transmit authentication information to
the access controller. For details about Wiegand direction settings, see Setting Wiegand Parameters
in Section 6.3.1 Communication Settings .
You can also connect the terminal to the secure door control unit. The wiring diagram is as follows:
Note: The secure door control unit should connect to an external power supply separately.

UM DS-K1T606 061719NA 19
Chapter 5 Installation
Installation Environment:
If the device is installed indoors, the device should be at least 6.6 ft (2 m) away from the light, and at
least 9.8 ft (3 m) away from the window or the door.
Ensure that the environment illumination is greater than 100 lux.
Note: For details about the installation environment, see Appendix C Tips for Installation Environment .
Installation Types:
Wall mounting with gang box and wall mounting without gang box.
5.1 Installation with Gang Box
Before you start:
Connect the supplied cable to the device terminals on the device rear panel.
According to the datum line on the mounting template, stick the mounting template on the wall or
other surface, 4.6 ft (1.4 m) above the ground.
Drill holes in the wall or other surface according to the mounting template, and install the gang box
(the dimensions of the gang box are 3.15" x 3.15", or 80 mm x 80 mm).
Figure 5-1: Wall Mounting Template

UM DS-K1T606 061719NA 20
Use two supplied screws to secure the mounting plate to the gang box.
Use another four supplied screws to secure the mounting plate to the wall.
Route the cables through the cable hole of the mounting plate, and connect to the corresponding
external device cables.
Remove the screw at the bottom of the device.
Align the device with the mounting plate and buckle them together.
Use a hex wrench to fasten the screw to the bottom.
Notes:
•The installation height shown here is the recommended height. You can change it according to your
actual needs.
•You can also install the device to the wall or other places without the gang box. For details, see
Installing without Gang Box .
•For easy installation, drill holes on mounting surface according to the supplied mounting template.
Figure 5-2: Device and Gang Box Installation
5.2 Installing without Gang Box
Before you start:
Connect the supplied cable to the device terminals on the device rear panel.
According to the baseline on the mounting template, fix the mounting template to the wall or other
surface. This should be at a height of 4.6 ft (1.4 m).