Hisense AVL-07UXJSGA Instruction Manual

AVL-38UXJSHA
AVL-30UXJSGA
AVL-27UXJSGA
AVL-12UXJSGA
AVL-09UXJSGA
AVL-07UXJSGA
P01136Q
ORIGINAL INSTRUCTIONS
2-Way
Cassette
Type
AVL-54UXJSHA
AVL-48UXJSHA
AVL-24UXJSGA
AVL-18UXJSGA
AVL-14UXJSGA

Declaration of Conformity
(Manufacturer’s Declaration)
which this declaration relates:
AVL-07UXJSGA,AVL-09UXJSGA,AVL-12UXJSGA,AVL-14UXJSGA,
AVL-18UXJSGA,AVL-24UXJSGA,AVL-27UXJSGA,AVL-30UXJSGA,
AVL-38UXJSHA,AVL-48UXJSHA,AVL-54UXJSHA
are in conformity with the following standard(s) or other normative document(s), provided that these
are used in accordance with our instructions:
EN 60335-1
EN 60335-2-40
EN 62233
EN 55014-1
EN 61000-3-2
EN 61000-3-3
EN 55014-2
following the provisions of:
2006/42/EC
2014/30/EU
2012/19/EU
2011/65/EU
Directives, as amended.
Manufacturing number and manufacturing year: refer to model Nameplate.
Notes:
This declaration becomes invalid, if technical or operational modifications are introduced
without the manufacturers consent.
Hisense Italia S.r.l. is authorised to Compile the Technical Construction File.
Ad. : Via Montefeltro 6A, 20156 Milano.
Name, Surname :
Position/ Title
Date
: Director
: January 17,2017
Qingdao Hisense Hitachi Air-conditioning Systems Co., Ltd.
Add: 218, Qianwangang Road, Economic & Technical Development Zone, Qingdao, P.R. China
declares under its sole responsibility that the air conditioning models to

Hisense
Hisense
Hisense

Hisense's
Hisense's
IMPORTANT NOTICE
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.

6
6
6
6
7
6
6
6
9
8
7
11
11
11
12
Section2 Installation & Maintenance Manual

13
13
13
14
15
15
15
16

l
l
l
The appliance is not to be used by children or
person with reduced physical, sensory or mental
capabilities,or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised that they do not play
with the appliance.
The appliance should not be installed in the laundry.
24
18
14090727 30 38 48 5412
2-Way Cassette Type
×10 Btu/h
3

3. Rem。ec。ntrol Switch

  
  

   
  



陪   
  °
   c.

用 「 陪

 

「阳 

e  

 
 
．
c
  
 



Regarding the instructions of Wired Remote
Control Switch or Wireless Remote Control
Switch,read the operation manual attached
to the control switch.

7
7.1
outlet
Outlet
Step 1
Remove the air returning decorative plate with
both hands,as shown below.
Step 2
Turn the buttons along edges of filter screen to
make them parallel to the slot, and then remove
the screen.

8.2
8.4
8
7.2
7.3
8.3

6
R410A
* To avoid damage to the resin covers,before
lifting or moving the indoor unit,put a cloth
on the resin covers.
21 Wrench

7
2.3
Indoor Unit Panel Selected
07~30 HP-C-NA
38~54 HP-F-NA
Air Panel(optional)
(big)
(small)
(big)
(small)
(big)
(small)
Cable Clamp For Power Wiring and
Transmission Wiring
6
2

8
500mm Min.
100mm
Min.
500mm Min.
500mm
Min.
Piping
Connection
Distance from Wall Side
1,500mm Min.
100mm Min.
1500mm Min. 500mm Min.
Piping
Connection Side
1,000mm Min.
Service Space
500mm
Min.
500mm
Min.
3000mm Min.
500mm Min.
500mm Min.
Piping
Connection
100mm
Min.
100mm
Min.
Clearance 10 - 20mm
298mm
Unit Hight in False
Ceiling

9
Optional Panel
A(Dimension of Opening)
B(Dimension of Suspension Bolts)
Position of
Suspension Bolts
（mm)
Unit: mm
Model A B
07~30 1048 910
38~54 1608 1470
For Concrete Slab
150 to 160mm
Steel
Insert
(100 to150kg)
Concrete
Anchor Bolt
(W3/8 or M10)
For Steel Beam
Suspension Bolt
(W3/8 or M10)
l Beam
For Wooden Beam
Wooden Rib
(60 to 90mm square timber)
Wooden Beam Suspension Bolt
Square Washer
Nut
Nut
Square Washer
4.3.3
*
(mm)
Approx. 50
4.7
Bracket
668(Dimension of
Opening)
Piping
Connection Side
Position of Optical Sensor (if optical
sensor component is selected
540
(Dimension of
Suspension Bolts)
115
Approx. 65
359
291
211
30
208
260
347
50
65 (Drain Pipe)
115
*indicates the dimension between lower face of
indoor unit and surface of ceiling.
10 Min.
347
30
*47
115
4-Suspension Bolts
M10 or W3/8(Field-Supplied)
Surface
of Ceiling
Nut(Field Supplied)
Washer(Accessory)
Gas Pipe Connection
Liquid Pipe Connection
Drain Pipe Connection
Panel
Air Inlet Grille
70(Gas Pipe)
70(Liquid Pipe)

10
4.3.4
4.8
Suspension Bolt
Suspension
Bracket
Drain Pan
Piping
Connection Side
Ceiling
Drain Pipe
Fixing Bracket of Panel
Bottom View
Indoor Unit
Suspension Bolt
Transparent
Plastic Hose
Dimension
of Opening
Indoor Unit
Ceiling
The fixing bracket is panel
Pattern Board
Bolt M6
(Panel Accessories)
Fixing Bracket of Panel
Adjustment Range
3-4mm
Connected to Indoor Unit
Connected to Ceiling
Adjust four corners of
the system with a
plastic hose filled with
water
47
32

11
10A
07 18
24~54
Flaring Dimension
Perform the flaring work as shown below.
Pipe Diameter (a)
Flaring
Diameter
(D)
12.7mm 60
291
211
260
208
(mm)
Gas Pipe
Liquid Pipe
Drain Pipe
Panel(optional)
70 Gas Pipe
70 Liquid Pipe
65 Drain Pipe
359
347

12
1.5or2.5
5.1
850
260 b
a
1 1.5m
c
≤
( 50 )
P
(mm)
≤
Down-Slope
1/25 to 1/100
Drain Hose
(Accessory)
Ceiling
≤
300)
Suspension
Bracket
-
950mm.
PDrain Hose
Drain pipe must be installed horizontally or in upward slope
to prevent occurrence of air column, or otherwise water will
flow from rear of the equipment to cause leakage or
abnormal noise when the equipment is shut down.
Horizontal or Upward Slope
(a) Use the drain pipe and hose clamp provided
by the manufacture.
(b) Do not impose too much force on the pipe
joint to prevent damage to it.
(c) Do not use any bent or twisted pipe, which
may cause leakage.
(d) Complete insert the drain pipe provided by
the manufacturer, or otherwise leakage may
be caused.
Hose Band(Accessory)
Tightening Torque 2.5~3.4(N.m)
20+5
(Correct)
(Incorrect) Twisted and Incomplete Insertion
Drain Hose(Accessory)
Polyvinyl Chloride-based
Adhesive Agent
No Adhesive Agent
to be
Insert Drain Pipe Completely to
End of The Hose Connection
Drain Pipe
Connection
Elbow or Polyvinyl Chloride VP25
6.1
1.5or2.5

13
●Turn OFF the main power switch to the indoor
unit and the outdoor unit and wait for at least 3
minutes before electrical wiring work or a
periodical check is performed.
●Check to ensure that the indoor fan and the
outdoor fan have stopped before electrical
wiring work or a periodical check is performed.
●Protect the wires,drain pipe, electrical parts,
etc. from rats or other small animals.
If not protected, rats may gnaw at unprotected
parts and at the worst, a fire will occur.
●Avoid any wire from contacting with
Refrigerant tube, edge of metal plate and
electrical part in the equipment, or otherwise
the wire may be damaged or even thereby
cause fire.
●ELB with intermediate induction rate (with
shorter than 0.1 second or fewer) shall be
used, or otherwise electric shock or fire may
be caused.
●Wire shall be fixed securely, since external
force imposed to the connecting terminal may
make it loose and thereby cause fire.
●Do not use the power terminal strip used for
the air conditioner to sub-connect any power
cable, but use power branch box to sub-
connect power wire at indoor unit side instead,
and be sure to calculate wire capacity, or
otherwise too low capacity may cause fire.
●The system shall not be started until all
inspections have been performed properly.
●Wrap the accessory packing around the wires,
and plug the wiring connection hole with the
seal material to protect the product from any
condensate water or insects.
●Tightly secure the wires with the cord clamp
inside the indoor unit.
●Secure the cable of the remote control switch
using the cord clamp inside the electrical box.
●Tighten screws according to the following
torque.
M3.5:1.2 N.m
M6:2.0~2.4 N.m
7.1.